Publications
Expand All
2024
Arnoldt A. , Österreicher JA. , Schiffl A. , Höppel HW. :Optimizing the Zn and Mg contents of Al–Zn–Mg wrought alloys for high strength and industrial-scale extrudability In: Journal of Materials Research and Technology 32 (2024 ), p. 2972-2982 ISSN: 2238-7854 DOI: 10.1016/j.jmrt.2024.08.014
Bandorf J. , Kirzinger A. , Zenk C. , Pang HT. , Rae CM. , Stone HJ. , Neumeier S. :On the Evolution of the γ/γ′ Lattice Misfit and TCP Phase Precipitation in a Highly Alloyed Single Crystalline Ni-Base Superalloy 15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA , 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (ed.): Minerals, Metals and Materials Series 2024 DOI: 10.1007/978-3-031-63937-1_7
Bezold A. , Vollhüter J. , Karpstein N. , Lenz M. , Subramanyam AP. , Zenk C. , Hammerschmidt T. , Spiecker E. , Göken M. , Neumeier S. :Segregation-induced strength anomalies in complex single-crystalline superalloys In: Communications Materials 5 (2024 ), Article No.: 8 ISSN: 2662-4443 DOI: 10.1038/s43246-024-00447-x
Dölling J. , Kuglstatter M. , Prahl U. , Höppel HW. , Ortner P. , Ott B. , Kracun SF. , Fehlbier M. , Zilly A. :Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium In: Metals 14 (2024 ), p. 258 ISSN: 2075-4701 DOI: 10.3390/met14030258
Dölling J. , Kuglstatter M. , Prahl U. , Höppel HW. , Ortner P. , Ott B. , Kracun SF. , Fehlbier M. , Zilly A. :Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium In: Metals 14 (2024 ), Article No.: 258 ISSN: 2075-4701 DOI: 10.3390/met14030258
Ernst B. , Kubaschinski P. , Schiessl A. , Waltz M. , Höppel HW. , Tetzlaff U. :Comparison of the Young's modulus of the lead free solder alloy Sn-Ag3.8-Cu0.7 determined by hot tensile tests, ultrasonic measurements and β-Sn single crystal calculations In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 916 (2024 ), Article No.: 147354 ISSN: 0921-5093 DOI: 10.1016/j.msea.2024.147354
Gaag T. , Weidinger J. , Bandorf J. , Lux V. , Wahlmann B. , Neumeier S. , Zenk C. , Körner C. :Experimental Validation of Property Models and Databases for Computational Superalloy Design In: Advanced Engineering Materials (2024 )ISSN: 1438-1656 DOI: 10.1002/adem.202401051
Gebhart DD. , Krapf A. , Schretter L. , Lassnig A. , Merle B. , Cordill MJ. , Gammer C. :Cyclic Failure of a Cr–Au Bilayer on Polyimide: In Situ Transmission Electron Microscopy Observations of Interfacial Dislocation Mechanisms In: Advanced Engineering Materials (2024 )ISSN: 1438-1656 DOI: 10.1002/adem.202400251
Ghorbani F. , Kim MH. , Ghalandari B. , Zhang M. , Varma SN. , Schöbel L. , Liu C. , Boccaccini AR. :Architecture of β-lactoglobulin coating modulates bioinspired alginate dialdehyde-gelatine/polydopamine scaffolds for subchondral bone regeneration In: Acta Biomaterialia 181 (2024 ), p. 188-201 ISSN: 1742-7061 DOI: 10.1016/j.actbio.2024.04.028
Haußmann L. , Bresler J. , Neumeier S. , Pyczak F. , Göken M. :Interdiffusion Coefficients and Strengthening Effects of Nb, Ta, and Zr in the α2-Ti3Al Phase In: Journal of Phase Equilibria and Diffusion (2024 )ISSN: 1547-7037 DOI: 10.1007/s11669-024-01105-y
Haußmann L. , Neumeier S. , Hausmann A. , Bergamaschi E. , Göken M. :Combinatorial Materials Research for the Development of New Advanced CoNi-Base Superalloys 15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA , 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (ed.): Minerals, Metals and Materials Series 2024 DOI: 10.1007/978-3-031-63937-1_8
Karpstein N. , Lenz M. , Bezold A. , Zehl R. , Wu M. , Ludwig A. , Laplanche G. , Neumeier S. , Spiecker E. :Unambiguous Stacking Fault Analysis for Unraveling Shearing Mechanisms and Shear-Based Transformations in the L12-Ordered γ′ Phase 15th International Symposium on Superalloys, ISS 2024 (Champion, PA, USA , 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (ed.): Proceedings of the 15th International Symposium on Superalloys 2024 DOI: 10.1007/978-3-031-63937-1_4
Karpstein N. , Wu M. , Bezold A. , Neumeier S. , Cormier J. , Spiecker E. :Temperature and Time Dependence of Elemental Segregation at Stacking Faults in Ni- and Co-Base Superalloys 15th International Symposium on Superalloys, ISS 2024 (Champion, PA, USA , 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (ed.): Minerals, Metals and Materials Series 2024 DOI: 10.1007/978-3-031-63937-1_47
Kim MH. , Schöbel L. , Geske M. , Boccaccini AR. , Ghorbani F. :Bovine serum albumin-modified 3D printed alginate dialdehyde-gelatin scaffolds incorporating polydopamine/SiO2-CaO nanoparticles for bone regeneration In: International Journal of Biological Macromolecules 264 (2024 ), Article No.: 130666 ISSN: 0141-8130 DOI: 10.1016/j.ijbiomac.2024.130666
Kirchmayer A. , Hausmann A. , Gabel S. , Pröbstle M. , Giese S. , Göken M. , Hünert D. , Neumeier S. :The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 (2024 ), p. 803-811 ISSN: 1073-5623 DOI: 10.1007/s11661-023-07286-4
Kirchmayer A. , Hausmann D. , Gabel S. , Pröbstle M. , Giese S. , Göken M. , Hünert D. , Neumeier S. :The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 (2024 ), p. 803-811 ISSN: 1073-5623 DOI: 10.1007/s11661-023-07286-4
Krapf A. , Merle B. , Gebhart DD. , Reiter M. , Lassnig A. , Göken M. , Cordill MJ. , Gammer C. :Observing High-Cycle Fatigue Damage in Freestanding Gold Thin Films with Bulge Testing and Intermittent Transmission Electron Microscopy Imaging In: Advanced Engineering Materials (2024 )ISSN: 1438-1656 DOI: 10.1002/adem.202400216
Kuglstatter M. , Nitschky M. , Hartmann A. , Kümmel F. , Fecher J. , Felfer P. , Höppel HW. , Göken M. :Adapting Conductivity and Mechanical Properties through Layer Thickness Variation in Copper Niobium Laminated Metallic Composites In: Advanced Engineering Materials (2024 ), Article No.: 2400266 ISSN: 1438-1656 DOI: 10.1002/adem.202400266
Neumeier S. , Freund L. , Bezold A. , Köbrich M. , Vollhüter J. , Hausmann D. , Solis C. , Stark A. , Schell N. , Pyczak F. , Felfer P. , Gilles R. , Göken M. :Advanced Polycrystalline γ′-Strengthened CoNiCr-Based Superalloys In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2024 )ISSN: 1073-5623 DOI: 10.1007/s11661-024-07319-6
Ortner P. , Schiffl A. , Höppel HW. :Influence of a Preageing Treatment on the Cluster Formation and the Further Ageing Route in Al–Mg–Si Extrusion Alloys In: Advanced Engineering Materials (2024 )ISSN: 1438-1656 DOI: 10.1002/adem.202400623
Ott B. , Heller M. , Monajem M. , Felfer P. :Miniaturized gas exposure devices for atom probe experiments In: Microscopy research and technique (2024 )ISSN: 1097-0029 DOI: 10.1002/jemt.24573
Pereira RM. , Lohbauer U. , Schulbert C. , Göken M. , Wurmshuber M. , Campos TBM. , Thim GP. , Mieller B. , Belli R. :Instantiations of Multiscale Kinship in Pressing‐Defect Distributions in Yttria‐Stabilized Zirconias by Powder Partitioning In: Advanced Engineering Materials (2024 )ISSN: 1438-1656 DOI: 10.1002/adem.202400139
Prado L. , Hayek S. , Mazare AV. , Erceg I. , Sarau G. , Christiansen S. , Kamaleev M. , Wurmshuber M. , Lohbauer U. , Goldmann W. , Virtanen S. , Tesler A. :Aerophilic Surfaces for Sustained Corrosion Protection of Metals Underwater In: Advanced Functional Materials (2024 ), Article No.: 2407444 ISSN: 1616-301X DOI: 10.1002/adfm.202407444
Rothermel F. , Thiele S. , Jung C. , Krapf A. , Ilse SE. , Merle B. , Giessen H. , Herkommer AM. :Fabrication and Characterization of a Magnetic 3D-printed Microactuator In: Advanced Materials Technologies (2024 )ISSN: 2365-709X DOI: 10.1002/admt.202302196
Schimbäck D. , Kaserer L. , Mair P. , Mohebbi MS. , Staron P. , Maier-Kiener V. , Letofsky-Papst I. , Kremmer T. , Palm F. , Montes I. , Höppel HW. , Leichtfried G. , Pogatscher S. :Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 905 (2024 ), Article No.: 146102 ISSN: 0921-5093 DOI: 10.1016/j.msea.2024.146102
Schlereth C. , Weiser M. , White E. , Felfer P. , Galetz M. :Oxide scale microstructure and failure mechanism of alloy 601 under varying metal dusting conditions In: Journal of Materials Science 59 (2024 ), p. 1087-1103 ISSN: 0022-2461 DOI: 10.1007/s10853-023-09260-2
Schmuck K. , Burtscher M. , Alfreider M. , Wurmshuber M. , Kiener D. :Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites In: JOM Journal of the Minerals, Metals and Materials Society (2024 )ISSN: 1047-4838 DOI: 10.1007/s11837-023-06348-7
Seynstahl A. , Köbrich M. , Rosnitschek T. , Göken M. , Tremmel S. :Enhancing the lifetime and vacuum tribological performance of PVD-MoS2 coatings by nitrogen modification In: Surface & Coatings Technology 477 (2024 ), Article No.: 130343 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2023.130343
Titz K. , Vollhüter J. , Randelzhofer P. , Neumeier S. , Göken M. , Wahlmann B. , Körner C. :Design and Characterization of a Novel NiAl–(Cr,Mo) Eutectic Alloy In: Advanced Engineering Materials (2024 )ISSN: 1438-1656 DOI: 10.1002/adem.202302079
Tsankova S. , Nagel O. , Bezold A. , Grandjean B. , Kirchmayer A. , Göken M. , Neumeier S. :Exploring Microstructural Characteristics, Mechanical Behavior, Hydrogen Embrittlement, and Long-Term Stability of Polycrystalline CoNiCr-Based Superalloys 15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA , 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (ed.): Minerals, Metals and Materials Series 2024 DOI: 10.1007/978-3-031-63937-1_30
Vorlaufer N. , Josten J. , Carl S. , Göbel E. , Soegaard A. , Taccardi N. , Spiecker E. , Felfer P. :Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating In: Microscopy Research and Technique 87 (2024 ), p. 476-483 ISSN: 1059-910X DOI: 10.1002/jemt.24448
Wilmers J. , Wurmshuber M. , Gescher C. , Graupp CM. , Kiener D. , Bargmann S. :Unraveling the orientation-dependent mechanics of dental enamel in the red-necked wallaby In: Acta Biomaterialia (2024 )ISSN: 1742-7061 DOI: 10.1016/j.actbio.2024.07.004
Winczewski JP. , Zeiler S. , Gabel S. , Maestre D. , Merle B. , Gardeniers JG. , Susarrey Arce A. :Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures In: Materials and Design 238 (2024 ), Article No.: 112701 ISSN: 0261-3069 DOI: 10.1016/j.matdes.2024.112701
2023
Bahr A. , Glechner T. , Grimmer A. , Wojcik T. , Kutrowatz P. , Podsednik M. , Limbeck A. , Heller M. , Ramm J. , Hunold O. , Kolozsvári S. , Polcik P. , Ntemou E. , Primetzhofer D. , Felfer P. , Riedl H. :High-temperature oxidation resistance of ternary and quaternary Cr-(Mo)-Si-B2-z coatings — Influence of Mo addition In: Surface & Coatings Technology 468 (2023 ), Article No.: 129733 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2023.129733
Bezold A. , Amon L. , Karpstein N. , Spiecker E. , Göken M. , Neumeier S. :Recovery of superlattice stacking faults at high temperatures In: Scripta Materialia 222 (2023 ), Article No.: 115005 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2022.115005
Bezold A. , Neumeier S. :Tailoring deformation mechanisms in polycrystalline CoNi-base superalloys for enhanced high temperature strength In: Scripta Materialia 226 (2023 ), Article No.: 115250 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2022.115250
Böhm T. , Felfer P. , Thiele S. :A Modular and Automated Serial Section Collection System for Ultramicrotomy and Subsequent Imaging In: Microscopy and Microanalysis 29 (2023 ), p. 212-218 ISSN: 1431-9276 DOI: 10.1093/micmic/ozac007
Börner F. , Keith M. , Fougerouse D. , Macauley C. , Felfer P. , Yokosawa T. , Apeleo Zubiri B. , Spiecker E. :Between defects and inclusions: The fate of tellurium in pyrite In: Chemical Geology 635 (2023 ), Article No.: 121633 ISSN: 0009-2541 DOI: 10.1016/j.chemgeo.2023.121633
Börner F. , Keith M. , Fougerouse D. , Macauley C. , Felfer P. , Yokosawa T. , Apeleo Zubiri B. , Spiecker E. :Between defects and inclusions: The fate of tellurium in pyrite In: Chemical Geology 635 (2023 ), p. 121633 ISSN: 0009-2541 DOI: 10.1016/j.chemgeo.2023.121633
Fritton M. , Kümmel F. , Kirchmayer A. , Stark A. , Hafez Haghighat M. , Gehrmann B. , Neumeier S. , Gilles R. :Investigation of the Hot Deformation Behavior in VDM® Alloy 780 by In Situ High-Energy X-Ray Diffraction In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023 )ISSN: 1073-5623 DOI: 10.1007/s11661-022-06942-5
Fuchs C. , Elitzer D. , Höppel HW. , Göken M. , Zaeh MF. :Investigation into the influence of the interlayer temperature on machinability and microstructure of additively manufactured Ti-6Al-4V In: Production Engineering (2023 )ISSN: 0944-6524 DOI: 10.1007/s11740-023-01192-9
Förner A. , Vollhüter J. , Krapf A. , Jamjoom AFA. , Hausmann D. , Wahlmann B. , Fu Z. , Körner C. , Neumeier S. , Göken M. :Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites In: Advanced Engineering Materials (2023 )ISSN: 1438-1656 DOI: 10.1002/adem.202300407
Gebhart DD. , Krapf A. , Merle B. , Gammer C. , Cordill MJ. :Describing mechanical damage evolution through in situ electrical resistance measurements In: Journal of Vacuum Science & Technology A 41 (2023 ), Article No.: 023408 ISSN: 0734-2101 DOI: 10.1116/6.0002362
Goik P. , Schiffl A. , Höppel HW. :Formation of Peripheral Coarse Grain in Thin-Walled Al–Mg–Si Extrusion Profiles In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023 )ISSN: 1073-5623 DOI: 10.1007/s11661-023-07144-3
Goik P. , Schiffl A. , Höppel HW. , Göken M. :The Role of Through-Thickness Variation of Texture and Grain Size on Bending Ductility of Al–Mg–Si Profiles Light Metals Symposium held at the TMS Annual Meeting and Exhibition, TMS 2023 (San Diego, CA, USA , 19. March 2023 - 23. March 2023 )In: Stephan Broek (ed.): Minerals, Metals and Materials Series 2023 DOI: 10.1007/978-3-031-22532-1_77
Hagen S. , Haußmann L. , Wahlmann B. , Gebhardt F. , Abu-Khousa B. , Weiser M. , Neumeier S. , Zenk C. , Virtanen S. :Influence of the W and Ta content on the High-Temperature Oxidation Resistance of Multinary Co/Ni-Based Superalloys at 1050 °C and 1150 °C In: High Temperature Corrosion of Materials (2023 )ISSN: 2731-8397 DOI: 10.1007/s11085-023-10183-1
Holz H. , Merle B. :Novel nanoindentation strain rate sweep method for continuously investigating the strain rate sensitivity of materials at the nanoscale In: Materials & Design 236 (2023 ), Article No.: 112471 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2023.112471
Hudak OE. , Bahr A. , Kutrowatz P. , Wojcik T. , Bohrn F. , Solyom L. , Schuster R. , Shang L. , Hunold O. , Polcik P. , Heller M. , Felfer P. , Ball G. , Riedl H. :Pitting corrosion-Preferred chloride diffusion pathways in physical vapor deposited AlCrN coatings In: Corrosion Science 211 (2023 )ISSN: 0010-938X DOI: 10.1016/j.corsci.2022.110901
Karpstein N. , Lenz M. , Bezold A. , Wu M. , Neumeier S. , Spiecker E. :Reliable identification of the complex or superlattice nature of intrinsic and extrinsic stacking faults in the L12 phase by high-resolution imaging In: Acta Materialia 260 (2023 ), Article No.: 119284 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2023.119284
Khanchandani H. , Rolli R. , Schneider HC. , Kirchlechner C. , Gault B. :Hydrogen embrittlement of twinning-induced plasticity steels: Contribution of segregation to twin boundaries In: Scripta Materialia 225 (2023 ), Article No.: 115187 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2022.115187
Khanchandani H. , Zeiler S. , Strobel L. , Göken M. , Felfer P. :A Carbon-Stabilized Austenitic Steel with Lower Hydrogen Embrittlement Susceptibility In: Steel Research International (2023 )ISSN: 1611-3683 DOI: 10.1002/srin.202300372
Kiener D. , Wurmshuber M. , Alfreider M. , Schaffar GJ. , Maier-Kiener V. :Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions In: Current Opinion in Solid State & Materials Science 27 (2023 ), Article No.: 101108 ISSN: 1359-0286 DOI: 10.1016/j.cossms.2023.101108 URL: https://www.sciencedirect.com/science/article/pii/S1359028623000530
Kirchmayer A. , Pröbstle M. , Huenert D. , Neumeier S. , Göken M. :Influence of Grain Size and Volume Fraction of η/δ Precipitates on the Dwell Fatigue Crack Propagation Rate and Creep Resistance of the Nickel-Base Superalloy ATI 718Plus In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023 )ISSN: 1073-5623 DOI: 10.1007/s11661-023-07001-3
Kirchmayer A. , Weiser M. , Randelzhofer P. , Freund L. , Gehrmann B. , Haghighat MH. , Huenert D. , Göken M. , Neumeier S. :Oxidation Behavior of the Polycrystalline Ni-Base Superalloy VDM® Alloy 780 In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023 )ISSN: 1073-5623 DOI: 10.1007/s11661-022-06956-z
Krapf A. , Gebhart DD. , Gammer C. , Cordill MJ. , Merle B. :Creep-dominated fatigue of freestanding gold thin films studied by bulge testing In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 887 (2023 ), Article No.: 145759 ISSN: 0921-5093 DOI: 10.1016/j.msea.2023.145759
Kuczyk M. , Zawischa M. , Krülle T. , Vollhüter J. , Zeiler S. , Leonhardt M. , Kaspar J. , Zimmer O. , Göken M. , Leyens C. , Zimmermann M. :In situ mechanical testing of hard yet tough high entropy nitride coatings deposited on compliant steel substrates In: Thin Solid Films 787 (2023 ), Article No.: 140137 ISSN: 0040-6090 DOI: 10.1016/j.tsf.2023.140137
Köbrich M. , Förner A. , Volz N. , Zenk C. , Fries SG. , Göken M. , Neumeier S. :Influence of refractory and platinum group metals on the microstructure and thermo-physical properties of Co-Al-W-based superalloys In: Journal of Alloys and Compounds 947 (2023 ), Article No.: 169542 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2023.169542
Marian M. , Zambrano D. , Rothammer B. , Waltenberger V. , Boidi G. , Krapf A. , Merle B. , Stampfl J. , Rosenkranz A. , Gachot C. , Grützmacher P. :Combining multi-scale surface texturing and DLC coatings for improved tribological performance of 3D printed polymers In: Surface & Coatings Technology 466 (2023 ), p. 129682 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2023.129682
Morales LA. , Bezold A. , Förner A. , Holz H. , Merle B. , Neumeier S. , Körner C. , Zenk C. :Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe-Based alpha/alpha '/alpha '' Superalloy In: Advanced Engineering Materials (2023 )ISSN: 1438-1656 DOI: 10.1002/adem.202201652
Palm MS. , Diepold B. , Neumeier S. , Höppel HW. , Göken M. , Zaeh MF. :Detection and effects of lack of fusion defects in Hastelloy X manufactured by laser powder bed fusion In: Materials & Design 230 (2023 ), Article No.: 111941 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2023.111941
Pohl P. , Kuglstatter M. , Göken M. , Höppel HW. :Quantifying Co-Deformation Effects in Metallic Laminates by Loading–Unloading–Reloading Tensile Tests In: Metals 13 (2023 ), p. 1049 ISSN: 2075-4701 DOI: 10.3390/met13061049
Pyczak F. , Liang Z. , Neumeier S. , Rao Z. :Stability and Physical Properties of the L1(2)-gamma ' Phase in the CoNiAlTi-System In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023 )ISSN: 1073-5623 DOI: 10.1007/s11661-022-06949-y
Risse JH. , Trempa M. , Huber F. , Höppel HW. , Bartels D. , Schmidt M. , Reimann C. , Friedrich J. :Microstructure and Mechanical Properties of Hypereutectic Al-High Si Alloys up to 70 wt.% Si-Content Produced from Pre-Alloyed and Blended Powder via Laser Powder Bed Fusion In: Materials 16 (2023 ), p. 657 ISSN: 1996-1944 DOI: 10.3390/ma16020657
Rothammer B. , Schwendner M. , Bartz M. , Wartzack S. , Böhm T. , Krauß S. , Merle B. , Schroeder S. , Uhler M. , Kretzer JP. , Weihnacht V. , Marian M. :Wear Mechanism of Superhard Tetrahedral Amorphous Carbon (ta-C) Coatings for Biomedical Applications In: Advanced Materials Interfaces 10 (2023 ), p. 1 - 17 ISSN: 2196-7350 DOI: 10.1002/admi.202202370 URL: https://onlinelibrary.wiley.com/doi/10.1002/admi.202202370
Sasidhar K. , Khanchandani H. , Zhang S. , Kwiatkowski da Silva A. , Scheu C. , Gault B. , Ponge D. , Raabe D. :Understanding the protective ability of the native oxide on an Fe-13 at% Cr alloy at the atomic scale: A combined atom probe and electron microscopy study In: Corrosion Science 211 (2023 ), Article No.: 110848 ISSN: 0010-938X DOI: 10.1016/j.corsci.2022.110848
Seligmann B. , Alfreider M. , Wurmshuber M. , Kiener D. :Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures In: Advanced Engineering Materials 25 (2023 ), Article No.: 2201209 ISSN: 1438-1656 DOI: 10.1002/adem.202201209
Vaid A. , Zaiser M. , Bitzek E. :Atomistic Simulations of Dislocation-Void Interactions in Concentrated Solid Solution Alloys In: Metals 13 (2023 ), Article No.: 1655 ISSN: 2075-4701 DOI: 10.3390/met13101655
Vollhüter J. , Bezold A. , Karpstein N. , Köbrich M. , Spiecker E. , Göken M. , Neumeier S. :Strain Rate-Dependent Anomalous Work Hardening of a Single-Crystalline CoNi-Base Superalloy In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023 )ISSN: 1073-5623 DOI: 10.1007/s11661-023-06966-5
Vorlaufer N. , Josten J. , Carl S. , Göbel E. , Soegaard A. , Taccardi N. , Spiecker E. , Felfer P. :Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating In: Microscopy Research and Technique 87 (2023 ), p. 476-483 ISSN: 1059-910X DOI: 10.1002/jemt.24448
Weiser M. , Olszta MJ. , Engelhard MH. , Zhu Z. , Schreiber DK. :Visualizing oxygen transport pathways during intergranular oxidation in Ni-Cr In: npj Materials Degradation 7 (2023 ), Article No.: 70 ISSN: 2397-2106 DOI: 10.1038/s41529-023-00387-w
Winczewski JP. , Zeiler S. , Gabel S. , Susarrey-Arce A. , Gardeniers JG. , Merle B. :Exploring the mechanical properties of additively manufactured carbon-rich zirconia 3D microarchitectures In: Materials & Design 232 (2023 ), Article No.: 112142 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2023.112142
Wolf M. , de Oliveira A. , Taccardi N. , Maisel S. , Heller M. , Khan Antara S. , Soegaard A. , Felfer P. , Görling A. , Haumann M. , Wasserscheid P. :Dry reforming of methane over gallium-based supported catalytically active liquid metal solutions In: Communications Chemistry 6 (2023 ), Article No.: 224 ISSN: 2399-3669 DOI: 10.1038/s42004-023-01018-w
Wurmshuber M. , Alfreider M. , Wurster S. , Burtscher M. , Pippan R. , Kiener D. :Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten In: Acta Materialia 250 (2023 ), Article No.: 118878 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2023.118878
Wurmshuber M. , Doppermann S. , Wurster S. , Jakob S. , Balooch M. , Alfreider M. , Schmuck K. , Bodlos R. , Romaner L. , Hosemann P. , Clemens H. , Maier-Kiener V. , Kiener D. :Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications In: International Journal of Refractory Metals & Hard Materials 111 (2023 ), Article No.: 106125 ISSN: 0263-4368 DOI: 10.1016/j.ijrmhm.2023.106125
Wurmshuber M. , Wilmers J. , Kim J. , Oh SH. , Kiener D. :Lower hardness than strength: the auxetic composite microstructure of limpet tooth In: Acta Biomaterialia 166 (2023 ), p. 447-453 ISSN: 1742-7061 DOI: 10.1016/j.actbio.2023.04.035 URL: https://www.sciencedirect.com/science/article/pii/S1742706123002350?via=ihub
Xue F. , Bezold A. , Volz N. , Kirchmayer A. , Zenk C. , Neumeier S. , Göken M. :Influence of the γ′ Volume Fraction on the High-Temperature Strength of Single Crystalline Co–Al–W–Ta Superalloys In: Crystals 13 (2023 ), Article No.: 1095 ISSN: 2073-4352 DOI: 10.3390/cryst13071095
Yang Z. , Huber F. , Krapf A. , Merle B. , Markl M. , Schmidt M. , Körner C. :Revealing bulk metallic glass crystallization kinetics during laser powder bed fusion by a combination of experimental and numerical methods In: Journal of Non-Crystalline Solids 619 (2023 ), Article No.: 122532 ISSN: 0022-3093 DOI: 10.1016/j.jnoncrysol.2023.122532
Zauner L. , Steiner A. , Glechner T. , Bahr A. , Ott B. , Hahn R. , Wojcik T. , Hunold O. , Ramm J. , Kolozsvári S. , Polcik P. , Felfer P. , Riedl H. :Role of Si segregation in the structural, mechanical, and compositional evolution of high-temperature oxidation resistant Cr-Si-B2±z thin films In: Journal of Alloys and Compounds 944 (2023 ), Article No.: 169203 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2023.169203
2022
Akhlaghi M. , Hock R. , Dallmann J. , Krapf A. , Merle B. , Hofsäss H. , Körner C. , Leineweber A. :Gaseous nitriding of Co-10 at% and -15 at% Cr alloys at 400 °C and 450 °C In: Journal of Alloys and Compounds 907 (2022 )ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2022.164535
Arnoldt AR. , Schiffl A. , Höppel HW. , Oesterreicher JA. :Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082 In: Materials Characterization 191 (2022 )ISSN: 1044-5803 DOI: 10.1016/j.matchar.2022.112129
Atila A. , Ouldhnini Y. , Ouaskit S. , Hasnaoui A. :Atomistic insights into the mixed-alkali effect in phosphosilicate glasses In: Physical Review B 105 (2022 ), Article No.: 134101 ISSN: 0163-1829 DOI: 10.1103/PhysRevB.105.134101
Bezold A. , Freund L. , Förner A. , Völkl J. , Huber LK. , Göken M. , Neumeier S. :Deformation Mechanisms in Compositionally Complex Polycrystalline CoNi-Base Superalloys: Influence of Temperature, Strain-Rate and Chemistry In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022 )ISSN: 1073-5623 DOI: 10.1007/s11661-022-06912-x
Bezold A. , Stone HJ. , Rae CMF. , Neumeier S. :In Situ Investigation of TCP Phase Formation, Stress Relaxation and gamma/gamma ' Lattice Misfit Evolution in Fourth Generation Single Crystal Ni-Base Superalloys by X-Ray High Temperature Diffraction In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022 )ISSN: 1073-5623 DOI: 10.1007/s11661-022-06713-2
Bezold A. , Volz N. , Lenz M. , Karpstein N. , Zenk C. , Spiecker E. , Göken M. , Neumeier S. :Quantification of the temperature-dependent evolution of defect structures in a CoNi-base superalloy In: Acta Materialia 227 (2022 ), Article No.: 117702 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2022.117702
Bezold A. , Volz N. , Xue F. , Neumeier S. , Göken M. :Anomalous Work Hardening Behavior of a Single Crystalline Co-Base Superalloy In: Alloys 1 (2022 ), p. 243-253-253 ISSN: 2674-063X DOI: 10.3390/alloys1030015
Bykova E. , Johansson E. , Bykov M. , Chariton S. , Fei H. , Ovsyannikov SV. , Aslandukova A. , Gabel S. , Holz H. , Merle B. , Alling B. , Abrikosov IA. , Smith JS. , Prakapenka VB. , Katsura T. , Dubrovinskaia N. , Goncharov AF. , Dubrovinsky L. :Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B2Dumbbells In: Chemistry of Materials 34 (2022 ), p. 8138-8152 ISSN: 0897-4756 DOI: 10.1021/acs.chemmater.2c00520
Bykova E. , Ovsyannikov S. , Bykov M. , Yin Y. , Fedotenko T. , Holz H. , Gabel S. , Merle B. , Chariton S. , Prakapenka VB. , Dubrovinskaia N. , Goncharov AF. , Dubrovinsky L. :Synthesis, crystal structure, and properties of stoichiometric hard tungsten tetraboride, WB4 In: Journal of Materials Chemistry A (2022 )ISSN: 2050-7488 DOI: 10.1039/d2ta02268k
Diepold B. , Schunk C. , Kümmel F. , Fey T. , Prakash A. , Höppel HW. , Göken M. :Fatigue Life Optimized Layer Architecture of Ultrafine-Grained Al-Ti Laminates Under Bending Stresses In: Advanced Engineering Materials (2022 )ISSN: 1438-1656 DOI: 10.1002/adem.202101143
Elitzer D. , Jäger S. , Höll C. , Baier D. , Varga R. , Zaeh MF. , Göken M. , Höppel HW. :Development of Microstructure and Mechanical Properties of TiAl6V4 Processed by Wire and Arc Additive Manufacturing In: Advanced Engineering Materials (2022 )ISSN: 1438-1656 DOI: 10.1002/adem.202201025
Gabel S. , Giese S. , Webler R. , Neumeier S. , Göken M. :Microcantilever Fracture Tests of α-Cr Containing NiAl Bond Coats In: Advanced Engineering Materials (2022 )ISSN: 1438-1656 DOI: 10.1002/adem.202101429
Gabel S. , Merle B. , Bitzek E. , Göken M. :A new method for microscale cyclic crack growth characterization from notched microcantilevers and application to single crystalline tungsten and a metallic glass In: Journal of Materials Research (2022 ), p. 2061-2072 ISSN: 0884-2914 DOI: 10.1557/s43578-022-00618-x
Gebhart DD. , Krapf A. , Gammer C. , Merle B. , Cordill MJ. :Linking through-thickness cracks in metallic thin films to in-situ electrical resistance peak broadening In: Scripta Materialia 212 (2022 ), Article No.: 114550 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2022.114550
Glechner T. , Bahr A. , Hahn R. , Wojcik T. , Heller M. , Kirnbauer A. , Ramm J. , Kolozsvari S. , Felfer P. , Riedl H. :High temperature oxidation resistance of physical vapor deposited Hf-Si-B-2 +/- z thin films In: Corrosion Science 205 (2022 )ISSN: 0010-938X DOI: 10.1016/j.corsci.2022.110413
Göken M. , Hangen UD. :nanomech 5 In: International Journal of Materials Research 96 (2022 ), p. 1225-1225 ISSN: 1862-5282 DOI: 10.1515/ijmr-2005-0213
Hagen S. , Weiser M. , Abu-Khousa B. , Virtanen S. :Influence of the Co/Ni Ratio and Dendritic Segregations on the High-Temperature Oxidation Resistance of Multinary Co-Rich Superalloys at 850 °C and 1050 °C In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022 )ISSN: 1073-5623 DOI: 10.1007/s11661-022-06620-6
Hausmann D. , Freund L. , Solis C. , Giese S. , Göken M. , Gilles R. , Neumeier S. :Cracking during High-Temperature Deformation of a High-Strength Polycrystalline CoNi-Base Superalloy In: Metals 12 (2022 )ISSN: 2075-4701 DOI: 10.3390/met12091520
Haußmann L. , Burbaum B. , Stoehr B. , Förner A. , Freund L. , Göken M. , Neumeier S. :Crack-Free Welding of a Co-Base Superalloy with High γ' Precipitate Fraction In: Advanced Engineering Materials (2022 )ISSN: 1438-1656 DOI: 10.1002/adem.202200609
Haußmann L. , Neumeier S. , Bresler J. , Keim S. , Pyczak F. , Göken M. :Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys In: Metals 12 (2022 ), Article No.: 752 ISSN: 2075-4701 DOI: 10.3390/met12050752
Haußmann L. , Yoo B. , Jung C. , Ryou K. , Choi WS. , Haußmann L. , Yang S. , Boll T. , Neumeier S. , Choi PP. :Directed energy deposition of γ/γ' Co-Al-W superalloys In: Additive Manufacturing 60C7 - 103287 (2022 )ISSN: 2214-7810 DOI: 10.1016/j.addma.2022.103287
Hiremath P. , Melin S. , Bitzek E. , Olsson PA. :Effects of interatomic potential on fracture behaviour in single- and bicrystalline tungsten In: Computational Materials Science 207 (2022 ), Article No.: 111283 ISSN: 0927-0256 DOI: 10.1016/j.commatsci.2022.111283
Höppel HW. , May J. , Eisenlohr P. , Göken M. :Strain-rate sensitivity of ultrafine-grained materials In: International Journal of Materials Research 96 (2022 ), p. 566-571 ISSN: 1862-5282 DOI: 10.3139/ijmr-2005-0101
Khanchandani H. , El-Zoka AA. , Kim SH. , Tezins U. , Vogel D. , Sturm A. , Raabe D. , Gault B. , Stephenson LT. :Laser-equipped gas reaction chamber for probing environmentally sensitive materials at near atomic scale In: PLoS ONE 17 (2022 ), Article No.: e0262543 ISSN: 1932-6203 DOI: 10.1371/journal.pone.0262543
Krauß S. , Seynstahl A. , Tremmel S. , Meyer B. , Bitzek E. , Göken M. , Yokosawa T. , Zubiri BA. , Spiecker E. , Merle B. :Structural reorientation and compaction of porous MoS2 coatings during wear testing In: Wear 500-501 (2022 ), Article No.: 204339 ISSN: 0043-1648 DOI: 10.1016/j.wear.2022.204339
Kümmel F. , Magnier A. , Wu T. , Niendorf T. , Höppel HW. :Residual Stresses in Ultrafine-Grained Laminated Metal Composites Analyzed by X-ray Diffraction and the Hole-Drilling Method In: Advanced Engineering Materials (2022 )ISSN: 1438-1656 DOI: 10.1002/adem.202200274
Liang Z. , Neumeier S. , Rao Z. , Göken M. , Pyczak F. :CALPHAD informed design of multicomponent CoNiCr-based superalloys exhibiting large lattice misfit and high yield stress In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 854 (2022 ), Article No.: 143798 ISSN: 0921-5093 DOI: 10.1016/j.msea.2022.143798
Liang Z. , Paul JDH. , Stark A. , Bezold A. , Neumeier S. , Göken M. , Pyczak F. :High-Temperature CoNi-Based Superalloys Strengthened by γ′-(Ni,Co)3(Cr,Al,Ti,X): The Effect of Refractory Elements In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022 )ISSN: 1073-5623 DOI: 10.1007/s11661-022-06795-y
Lubauer J. , Ast J. , Göken M. , Merle B. , Lohbauer U. , Belli R. :Resistance-curve envelopes for dental lithium disilicate glass-ceramics In: Journal of the European Ceramic Society (2022 )ISSN: 0955-2219 DOI: 10.1016/j.jeurceramsoc.2022.01.013
Luo N. , Galgon F. , Krauß S. , Morales LA. , Merle B. , Zenk C. , Körner C. :Microstructural evolution and mechanical properties in Zr–Cu–Al–Nb bulk metallic glass composites prepared by laser metal deposition In: Intermetallics 140 (2022 ), Article No.: 107393 ISSN: 0966-9795 DOI: 10.1016/j.intermet.2021.107393
Luo N. , Huber F. , Ciftci N. , Wahl L. , Bezold A. , Neumeier S. , Uhlenwinkel V. , Travitzky N. , Schmidt M. , Zenk C. , Körner C. :Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 (2022 ), Article No.: 143405 ISSN: 0921-5093 DOI: 10.1016/j.msea.2022.143405
Maier-Kiener V. , Lawrence SK. , Merle B. :30 Years of Oliver-Pharr: Then, Now and the Future of Nanoindentation In: JOM Journal of the Minerals, Metals and Materials Society (2022 )ISSN: 1047-4838 DOI: 10.1007/s11837-022-05305-0
Meier MS. , Jones ME. , Felfer P. , Moody MP. , Haley D. :Extending Estimating Hydrogen Content in Atom Probe Tomography Experiments Where H 2 Molecule Formation Occurs In: Microscopy and Microanalysis 28 (2022 ), p. 1231-1244 ISSN: 1431-9276 DOI: 10.1017/S1431927621012332
Messing GL. , Bose S. , Göken M. , Morgan SE. :JMR early career scholars in materials science annual issue In: Journal of Materials Research 37 (2022 ), p. 1-1 ISSN: 0884-2914 DOI: 10.1557/s43578-021-00475-0
Oh SH. , Kim JK. , Liu Y. , Wurmshuber M. , Peng XL. , Seo J. , Jeong J. , Wang Z. , Wilmers J. , Soyarslan C. , Kim J. , Kittiwirayanon B. , Jeong J. , Kim HJ. , Huh YH. , Kiener D. , Bargmann S. , Gao H. :Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness In: Science Advances 8 (2022 ), Article No.: eadd4644 ISSN: 2375-2548 DOI: 10.1126/sciadv.add4644
Ouldhnini Y. , Atila A. , Ouaskit S. , Hasnaoui A. :Density-Diffusion Relationship in Soda-Lime Phosphosilicate In: Journal of Non-Crystalline Solids 590 (2022 ), Article No.: 121665 ISSN: 0022-3093 DOI: 10.1016/j.jnoncrysol.2022.121665
Schimmel S. , Salamon M. , Tomida D. , Neumeier S. , Ishiguro T. , Honda Y. , Chichibu SF. , Amano H. :High-Energy Computed Tomography as a Prospective Tool for In Situ Monitoring of Mass Transfer Processes inside High-Pressure Reactors-A Case Study on Ammonothermal Bulk Crystal Growth of Nitrides including GaN In: Materials 15 (2022 ), p. 6165 ISSN: 1996-1944 DOI: 10.3390/ma15176165
Schneider T. , Moffitt J. , Volz N. , Müller D. , Karl J. :Long-term effects of ilmenite on a micro-scale bubbling fluidized bed combined heat and power pilot plant for oxygen carrier aided combustion of wood In: Applied Energy 314 (2022 ), p. 118953 ISSN: 0306-2619 DOI: 10.1016/j.apenergy.2022.118953
Solís C. , Kirchmayer A. , da Silva I. , Kümmel F. , Mühlbauer S. , Beran P. , Gehrmann B. , Haghighat MH. , Neumeier S. , Gilles R. :Monitoring the precipitation of the hardening phase in the new VDM® Alloy 780 by in-situ high-temperature small-angle neutron scattering, neutron diffraction and complementary microscopy techniques In: Journal of Alloys and Compounds 928 (2022 ), Article No.: 167203 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2022.167203
Stückler M. , Zálešák J. , Müller T. , Wurster S. , Weissitsch L. , Meier M. , Felfer P. , Gammer C. , Pippan R. , Bachmaier A. :Oxide-stabilized microstructure of severe plastically deformed CuCo alloys In: Journal of Alloys and Compounds 901 (2022 ), Article No.: 163616 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2022.163616
Taali S. , Toroghinejad MR. , Kuglstatter M. , Höppel HW. :Grain boundary engineering in roll-bonded copper to overcome the strength-ductility dilemma In: Journal of Materials Research and Technology 17 (2022 ), p. 3198-3204 ISSN: 2238-7854 DOI: 10.1016/j.jmrt.2022.02.032
Thompson Y. , Zissel K. , Förner A. , Gonzalez-Gutierrez J. , Kukla C. , Neumeier S. , Felfer P. :Metal fused filament fabrication of the nickel-base superalloy IN 718 In: Journal of Materials Science (2022 )ISSN: 0022-2461 DOI: 10.1007/s10853-022-06937-y
Vaid A. , Wei D. , Bitzek E. , Nasiri S. , Zaiser M. :Pinning of extended dislocations in atomically disordered crystals In: Acta Materialia 236 (2022 )ISSN: 1359-6454 DOI: 10.1016/j.actamat.2022.118095
Wahlmann B. , Bandorf J. , Volz N. , Förner A. , Pröbstle J. , Multerer K. , Göken M. , Markl M. , Neumeier S. , Körner C. :Numerical Design of CoNi-Base Superalloys With Improved Casting Structure In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022 )ISSN: 1073-5623 DOI: 10.1007/s11661-022-06870-4
Wallis D. , Harris J. , Böhm C. , Wang D. , Zavattieri P. , Feldner P. , Merle B. , Pipich V. , Hurle K. , Leupold S. , Hansen LN. , Marin F. , Wolf S. :Erratum: Progressive changes in crystallographic textures of biominerals generate functionally graded ceramics (Mater. Adv. (2022) DOI: 10.1039/d1ma01031j) In: Materials Advances 3 (2022 ), p. 2598- ISSN: 2633-5409 DOI: 10.1039/d2ma90020c
Webler R. , Baranova P. , Karewar S. , Möller J. , Neumeier S. , Göken M. , Bitzek E. :On the influence of Al-concentration on the fracture toughness of NiAl: Microcantilever fracture tests and atomistic simulations In: Acta Materialia 234 (2022 ), Article No.: 117996 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2022.117996
Winczewski J. , Herrera M. , Cabriel C. , Izeddin I. , Gabel S. , Merle B. , Susarrey Arce A. , Gardeniers H. :Additive Manufacturing of 3D Luminescent ZrO2:Eu3+ Architectures In: Advanced Optical Materials (2022 )ISSN: 2195-1071 DOI: 10.1002/adom.202102758
Wurmshuber M. , Balooch M. , Huang X. , Hosemann P. , Kiener D. :Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications In: Scripta Materialia 213 (2022 ), Article No.: 114641 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2022.114641
Wurmshuber M. , Burtscher M. , Doppermann S. , Bodlos R. , Scheiber D. , Romaner L. , Kiener D. :Mechanical performance of doped W–Cu nanocomposites In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 857 (2022 ), Article No.: 144102 ISSN: 0921-5093 DOI: 10.1016/j.msea.2022.144102
Wurmshuber M. , Jakob S. , Doppermann S. , Wurster S. , Bodlos R. , Romaner L. , Maier-Kiener V. , Kiener D. :Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry In: Acta Materialia 232 (2022 ), Article No.: 117939 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2022.117939
Yang Z. , Wang H. , Krauß S. , Huber F. , Merle B. , Schmidt M. , Markl M. , Körner C. :Evolution of an industrial-grade Zr-based bulk metallic glass during multiple laser beam melting In: Journal of Non-Crystalline Solids 589 (2022 ), Article No.: 121649 ISSN: 0022-3093 DOI: 10.1016/j.jnoncrysol.2022.121649
Yoo B. , Jung C. , Ryou K. , Choi WS. , Haußmann L. , Yang S. , Boll T. , Neumeier S. , Choi PP. :Directed energy deposition of gamma/gamma' Co-Al-W superalloys In: Additive Manufacturing 60 (2022 )ISSN: 2214-7810 DOI: 10.1016/j.addma.2022.103287
2021
Aschauer E. , Wojcik T. , Polcik P. , Hunold O. , Arndt M. , Dalbauer V. , Mayrhofer PH. , Felfer P. , Riedl H. :Ultra-high oxidation resistance of nano-structured thin films In: Materials & Design 201 (2021 ), Article No.: 109499 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2021.109499
Bezold A. , Volz N. , Lenz M. , Zenk C. , Spiecker E. , Mills MJ. , Göken M. , Neumeier S. :Yielding behavior of a single-crystalline γ'-strengthened Co-Ti-Cr superalloy In: Scripta Materialia 200 (2021 ), p. 113928 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2021.113928
Biermann H. , Vinogradov A. , Hartmann O. , Hartmann O. :Fatigue damage evolution in a particulate-reinforced metal matrix composite determined by acoustic emission and compliance method In: International Journal of Materials Research 93 (2021 ), p. 719-723 ISSN: 1862-5282 DOI: 10.3139/ijmr-2002-0121
Burtscher M. , Zhao M. , Kappacher J. , Leitner A. , Wurmshuber M. , Pfeifenberger M. , Maier-Kiener V. , Kiener D. :High-temperature nanoindentation of an advanced nano-crystalline W/Cu composite In: Nanomaterials 11 (2021 ), Article No.: 2951 ISSN: 2079-4991 DOI: 10.3390/nano11112951
Chauraud D. , Durinck J. , Vernisse L. , Smalley S. , Drouet M. , Coupeau C. :External stress as a way to control Au(111) reconstruction In: Surface Science 714 (2021 ), Article No.: 121908 ISSN: 0039-6028 DOI: 10.1016/j.susc.2021.121908
Diepold B. , Neumeier S. , Meermeier A. , Höppel HW. , Sebald T. , Göken M. :Temperature-Dependent Dynamic Strain Aging in Selective Laser Melted 316L In: Advanced Engineering Materials (2021 )ISSN: 1438-1656 DOI: 10.1002/adem.202001501
Diepold B. , Palm MS. , Wimmer A. , Sebald T. , Höppel HW. , Neumeier S. , Göken M. :Rotating Scan Strategy Induced Anisotropic Microstructural and Mechanical Behavior of Selective Laser Melted Materials and Their Reduction by Heat Treatments In: Advanced Engineering Materials (2021 )ISSN: 1438-1656 DOI: 10.1002/adem.202100622
Feldner P. , Merle B. , Göken M. :Breakdown of the superplastic deformation behavior of heterogeneous nanomaterials at small length scales In: Materials Research Letters 9 (2021 ), p. 41-49 ISSN: 2166-3831 DOI: 10.1080/21663831.2020.1818323 URL: https://www.tandfonline.com/doi/pdf/10.1080/21663831.2020.1818323
Felfer P. , Ott B. , Monajem M. , Dalbauer V. , Heller M. , Josten J. , Macaulay C. :An Atom Probe with Ultra-Low Hydrogen Background In: Microscopy and Microanalysis (2021 )ISSN: 1431-9276 DOI: 10.1017/S1431927621013702
Förner A. , Vollhüter J. , Hausmann D. , Arnold C. , Felfer P. , Neumeier S. , Göken M. :Nanostructuring of Nb-Si-Cr Alloys by Electron Beam Melting to Improve the Mechanical Properties and the Oxidation Behavior In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021 )ISSN: 1073-5623 DOI: 10.1007/s11661-021-06516-x
Gaag T. , Ritter N. , Peters A. , Volz N. , Gruber D. , Neumeier S. , Zenk C. , Körner C. :Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys In: Metals 11 (2021 ), Article No.: 1707 ISSN: 2075-4701 DOI: 10.3390/met11111707
Gabel S. , Giese S. , Merle B. , Sprenger I. , Heilmaier M. , Neumeier S. , Bitzek E. , Göken M. :Microcantilever Fracture Tests on Eutectic NiAl–Cr(Mo) In Situ Composites In: Advanced Engineering Materials (2021 )ISSN: 1438-1656 DOI: 10.1002/adem.202001464 URL: https://onlinelibrary.wiley.com/doi/epdf/10.1002/adem.202001464
Gonzalez-Gutierrez J. , Thompson Y. , Handl D. , Cano S. , Schuschnigg S. , Felfer P. , Kukla C. , Holzer C. , Burkhardt C. :Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness In: Materials Letters 283 (2021 )ISSN: 0167-577X DOI: 10.1016/j.matlet.2020.128909
Gsellmann M. , Klünsner T. , Mitterer C. , Krobath M. , Wurmshuber M. , Leitner H. , Ecker W. , Marsoner S. , Maier-Kiener V. , Kiener D. , Ressel G. :Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing In: Materials & Design 204 (2021 ), Article No.: 109690 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2021.109690
Hausmann D. , Förner A. , Pröbstle M. , Huenert D. , Felfer P. , Göken M. , Neumeier S. :Correlation Between Local Chemical Composition and Formation of Different Types of Ordered Phases in the Polycrystalline Nickel-Base Superalloy A718Plus In: Advanced Engineering Materials (2021 )ISSN: 1438-1656 DOI: 10.1002/adem.202100558
Haußmann L. , Rehman HU. , Matschkal D. , Göken M. , Neumeier S. :Solid solution strengthening of Mo, Re, Ta and W in Ni during high-temperature creep In: Metals 11 (2021 ), Article No.: 1909 ISSN: 2075-4701 DOI: 10.3390/met11121909
Josten J. , Felfer P. :Atom Probe Analysis of Nanoparticles through Pick and Coat Sample Preparation In: Microscopy and Microanalysis (2021 )ISSN: 1431-9276 DOI: 10.1017/S1431927621000465
Kohlhepp M. , Uggowitzer PJ. , Hummel M. , Höppel HW. :Formation of Die Soldering and the Influence of Alloying Elements on the Intermetallic Interface In: Materials 14 (2021 ), p. 1580 ISSN: 1996-1944 DOI: 10.3390/ma14071580
Konrad J. , Meißner RH. , Bitzek E. , Zahn D. :A Molecular Simulation Approach to Bond Reorganization in Epoxy Resins: From Curing to Deformation and Fracture In: ACS Polymers Au (2021 ), Article No.: acspolymersau.1c00016 ISSN: 2694-2453 DOI: 10.1021/acspolymersau.1c00016
Kümmel F. , Höppel HW. , Göken M. :Ultrafine-Grained Laminated Metal Composites: A New Material Class for Tailoring Cyclically Stressed Components In: Advanced Engineering Materials (2021 )ISSN: 1438-1656 DOI: 10.1002/adem.202100070
Kümmel F. , Kirchmayer A. , Solís C. , Hofmann M. , Neumeier S. , Gilles R. :Deformation mechanisms in Ni-based superalloys at room and elevated temperatures studied by in Situ neutron diffraction and electron microscopy In: Metals 11 (2021 ), Article No.: 719 ISSN: 2075-4701 DOI: 10.3390/met11050719
Liang Z. , Göken M. , Lorenz U. , Neumeier S. , Oehring M. , Pyczak F. , Stark A. , Wang L. :Influence of small amounts of Si and Cr on the high temperature oxidation behavior of novel cobalt base superalloys In: Corrosion Science 184 (2021 ), Article No.: 109388 ISSN: 0010-938X DOI: 10.1016/j.corsci.2021.109388
Liang Z. , Pyczak F. , Stark A. , Rao Z. , Neumeier S. , Göken M. :Breaking the continuity of the Al2O3 oxide scale by additions of Cr in Co-Al-W-based superalloys In: Corrosion Science 189 (2021 ), Article No.: 109594 ISSN: 0010-938X DOI: 10.1016/j.corsci.2021.109594
Liebig JP. , Mackovic M. , Spiecker E. , Göken M. , Merle B. :Grain boundary mediated plasticity: A blessing for the ductility of metallic thin films? In: Acta Materialia 215 (2021 ), Article No.: 117079 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2021.117079 URL: https://www.sciencedirect.com/science/article/pii/S1359645421004596/pdfft?isDTMRedir=true&download=true
Macauley C. , Heller M. , Rausch A. , Kümmel F. , Felfer P. :A versatile cryo-transfer system, connecting cryogenic focused ion beam sample preparation to atom probe microscopy In: PLoS ONE 16 (2021 ), Article No.: e0245555 ISSN: 1932-6203 DOI: 10.1371/journal.pone.0245555
Marian M. , Feile K. , Rothammer B. , Bartz M. , Wartzack S. , Seynstahl A. , Tremmel S. , Krauß S. , Merle B. , Boehm T. , Wang B. , Wyatt BC. , Anasori B. , Rosenkranz A. :Ti3C2Tx Solid Lubricant Coatings in Rolling Bearings with Remarkable Performance beyond State-of-the-Art Materials In: Applied Materials Today 25 (2021 ), p. 1-9 ISSN: 2352-9407 DOI: 10.1016/j.apmt.2021.101202 URL: https://www.sciencedirect.com/science/article/pii/S2352940721002663?dgcid=coauthor
Matschkal D. , Tuengerthal P. , Lamm S. , Göken M. , Höppel HW. , Felfer P. :Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography In: Metals 11 (2021 ), Article No.: 1727 ISSN: 2075-4701 DOI: 10.3390/met11111727
Merle B. , Maier-Kiener V. , Rupert TJ. , Pharr GM. :Current trends in nanomechanical testing research In: Journal of Materials Research (2021 )ISSN: 0884-2914 DOI: 10.1557/s43578-021-00280-9 URL: https://link.springer.com/content/pdf/10.1557/s43578-021-00280-9.pdf
Misra A. , Göken M. , Mara NA. , Beyerlein IJ. :Hierarchical and heterogeneous multiphase metallic nanomaterials and laminates In: Mrs Bulletin (2021 )ISSN: 0883-7694 DOI: 10.1557/s43577-021-00059-7
Morgado FF. , Katnagallu S. , Freysoldt C. , Klaes B. , Vurpillot F. , Neugebauer J. , Raabe D. , Neumeier S. , Gault B. , Stephenson LT. :Corrigendum to Revealing atomic-scale vacancy-solute interaction in nickel(Scripta Materialia (2021) 203, (114036) (S135964622100316X), (10.1016/j.scriptamat.2021.114036)) In: Scripta Materialia 205 (2021 ), Article No.: 114213 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2021.114213
Morgado FF. , Katnagallu S. , Freysoldt C. , Klaes B. , Vurpillot F. , Neugebauer J. , Raabe D. , Neumeier S. , Gault B. , Stephenson LT. :Revealing atomic-scale vacancy-solute interaction in nickel In: Scripta Materialia 203 (2021 ), Article No.: 114036 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2021.114036
Mukhopadhyay S. , Sriram H. , Zenk C. , Didomizio R. , Detor AJ. , Hayes RW. , Viswanathan GB. , Wang Y. , Mills MJ. :Creep behavior of compact γ′-γ′′ coprecipitation strengthened in718-variant superalloy In: Metals 11 (2021 ), Article No.: 1897 ISSN: 2075-4701 DOI: 10.3390/met11121897
Neumeier S. , Bresler J. , Zenk C. , Haußmann L. , Stark A. , Pyczak F. , Göken M. :Partitioning Behavior of Nb, Ta, and Zr in Fully Lamellar gamma/alpha(2) Titanium Aluminides and Its Effect on the Lattice Misfit and Creep Behavior In: Advanced Engineering Materials (2021 )ISSN: 1438-1656 DOI: 10.1002/adem.202100156
Neumeier S. , Pyczak F. , Göken M. :The temperature dependent lattice misfit of rhenium and ruthenium containing nickel-base superalloys – Experiment and modelling In: Materials and Design 198 (2021 ), Article No.: 109362 ISSN: 0261-3069 DOI: 10.1016/j.matdes.2020.109362
Oh HS. , Odbadrakh K. , Ikeda Y. , Mu S. , Körmann F. , Sun CJ. , Ahn HS. , Yoon KN. , Ma D. , Tasan CC. , Egami T. , Park ES. :Element-resolved local lattice distortion in complex concentrated alloys: An observable signature of electronic effects In: Acta Materialia 216 (2021 ), Article No.: 117135 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2021.117135
Ouldhnini Y. , Atila A. , Ouaskit S. , Hasnaoui A. :Atomistic insights into the structure and elasticity of densified 45S5 bioactive glasses In: Physical Chemistry Chemical Physics (2021 )ISSN: 1463-9076 DOI: 10.1039/d1cp02192c
Pohl P. , Kümmel F. , Schunk C. , Serrano-Munoz I. , Markötter H. , Göken M. , Höppel HW. :About the role of interfaces on the fatigue crack propagation in laminated metallic composites In: Materials 14 (2021 ), Article No.: 2564 ISSN: 1996-1944 DOI: 10.3390/ma14102564
Preiß E. , Merle B. , Xiao Y. , Gannott F. , Liebig JP. , Wheeler JM. , Göken M. :Applicability of focused Ion beam (FIB) milling with gallium, neon, and xenon to the fracture toughness characterization of gold thin films In: Journal of Materials Research (2021 )ISSN: 0884-2914 DOI: 10.1557/s43578-020-00045-w URL: https://link.springer.com/content/pdf/10.1557/s43578-020-00045-w.pdf
Pugsley V. , Korn G. , Luyckx S. , Sockel HG. :On localised corrosive attack, stress corrosion cracking and corrosion fatigue effects in a hardmetal cutting-tool material In: International Journal of Materials Research 93 (2021 ), p. 745-749 ISSN: 1862-5282 DOI: 10.3139/ijmr-2002-0125
Raman N. , Wolf M. , Heller M. , Heene-Würl N. , Taccardi N. , Haumann M. , Felfer P. , Wasserscheid P. :GaPt Supported Catalytically Active Liquid Metal Solution Catalysis for Propane Dehydrogenation-Support Influence and Coking Studies In: ACS Catalysis (2021 ), p. 13423-13433 ISSN: 2155-5435 DOI: 10.1021/acscatal.1c01924
Rothammer B. , Marian M. , Neusser K. , Bartz M. , Böhm T. , Krauß S. , Schroeder S. , Uhler M. , Thiele S. , Merle B. , Kretzer JP. , Wartzack S. :Amorphous Carbon Coatings for Total Knee Replacements—Part II: Tribological Behavior In: Polymers 13 (2021 ), p. 1 - 25 ISSN: 2073-4360 DOI: 10.3390/polym13111880 URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_60bb59ba4432e
Rothammer B. , Neusser K. , Marian M. , Bartz M. , Krauß S. , Böhm T. , Thiele S. , Merle B. , Detsch R. , Wartzack S. :Amorphous Carbon Coatings for Total Knee Replacements—Part I: Deposition, Cytocompatibility, Chemical and Mechanical Properties In: Polymers 13 (2021 ), p. 1 - 23 ISSN: 2073-4360 DOI: 10.3390/polym13121952 URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_60c364643981f
Sadl M. , Condurache O. , Bencan A. , Dragomir M. , Prah U. , Malic B. , Deluca M. , Eckstein U. , Hausmann D. , Khansur NH. , Webber KG. , Ursic H. :Energy-storage-efficient 0.9Pb(Mg1/3Nb2/3)O3–0.1PbTiO3 thick films integrated directly onto stainless steel In: Acta Materialia 221 (2021 ), Article No.: 117403 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2021.117403
Seynstahl A. , Krauß S. , Bitzek E. , Meyer B. , Merle B. , Tremmel S. :Microstructure, mechanical properties and tribological behavior of magnetron-sputtered mos2 solid lubricant coatings deposited under industrial conditions In: Coatings 11 (2021 ), Article No.: 455 ISSN: 2079-6412 DOI: 10.3390/coatings11040455
Sommerschuh M. , Wirth J. , Englisch S. , Przybilla T. , Apeleo Zubiri B. , Pistor J. , Merle B. , Körner C. , Göken M. , Spiecker E. :A scale-bridging study of the influence of TCP phases on the mechanical properties of an additive manufactured Ni-base superalloy combining microcompression testing, X-ray nanotomography and TEM In: Microscopy and Microanalysis 27 (2021 ), p. 938-942 ISSN: 1431-9276 DOI: 10.1017/S1431927621003603
Tayebi Arasteh S. , Monajem M. , Christlein V. , Heinrich P. , Nicolao A. , Boldaji HN. , Lotfinia M. , Evert S. :How Will Your Tweet Be Received? Predicting the Sentiment Polarity of Tweet Replies IEEE 15th International Conference on Semantic Computing (ICSC) (Laguna Hills, CA , 27. January 2021 - 29. January 2021 )In: IEEE (ed.): 2021 IEEE 15th International Conference on Semantic Computing (ICSC) 2021 DOI: 10.1109/ICSC50631.2021.00068 URL: https://ieeexplore.ieee.org/document/9364527
Thompson Y. , Polzer M. , Gonzalez-Gutierrez J. , Kasian O. , Heckl JP. , Dalbauer V. , Kukla C. , Felfer P. :Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium In: Advanced Engineering Materials (2021 )ISSN: 1438-1656 DOI: 10.1002/adem.202100380
Volz N. , Xue F. , Bezold A. , Zenk C. , Fries SG. , Schreuer J. , Neumeier S. , Göken M. :Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021 )ISSN: 1073-5623 DOI: 10.1007/s11661-021-06353-y
Volz N. , Xue F. , Zenk C. , Bezold A. , Gabel S. , Subramanyam AP. , Drautz R. , Hammerschmidt T. , Makineni SK. , Gault B. , Göken M. , Neumeier S. :Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy In: Acta Materialia 214 (2021 ), p. 117019 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2021.117019
Volz N. , Zenk C. , Karpstein N. , Lenz M. , Spiecker E. , Göken M. , Neumeier S. :Creep properties and deformation mechanisms of single-crystalline gamma '-strengthened superalloys in dependence of the Co/Ni ratio In: Philosophical Magazine (2021 )ISSN: 1478-6435 DOI: 10.1080/14786435.2021.2017051
Wahl L. , Weichelt M. , Goik P. , Schmiedeke S. , Travitzky N. :Robocasting of reaction bonded silicon carbide/silicon carbide platelet composites In: Ceramics International 47 (2021 ), p. 9736-9744 ISSN: 0272-8842 DOI: 10.1016/j.ceramint.2020.12.113
Wallis D. , Harris J. , Böhm C. , Wang D. , Zavattieri P. , Feldner P. , Merle B. , Pipich V. , Hurle K. , Leupold S. , Hansen LN. , Marin F. , Wolf S. :Progressive changes in crystallographic textures of biominerals generate functionally graded ceramics In: Materials Advances (2021 )ISSN: 2633-5409 DOI: 10.1039/d1ma01031j
Wang J. , Kang E. , Sultan U. , Merle B. , Inayat A. , Graczykowski B. , Fytas G. , Vogel N. :Influence of Surfactant-Mediated Interparticle Contacts on the Mechanical Stability of Supraparticles In: Journal of Physical Chemistry C (2021 )ISSN: 1932-7447 DOI: 10.1021/acs.jpcc.1c06839
Wang J. , Schwenger J. , Feldner P. , Ströbel A. , Herre P. , Romeis S. , Peukert W. , Merle B. , Vogel N. :Mechanics of colloidal supraparticles under compression In: Science Advances 7 (2021 ), Article No.: eabj0954 ISSN: 2375-2548 DOI: 10.1126/sciadv.abj0954
Weikert T. , Wartzack S. , Baloglu MV. , Willner K. , Gabel S. , Merle B. , Pineda F. , Walczak M. , Marian M. , Rosenkranz A. , Tremmel S. :Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation In: Surface & Coatings Technology 407 (2021 ), Article No.: 126769 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2020.126769 URL: http://www.sciencedirect.com/science/article/pii/S0257897220314390
Wurmshuber M. , Frazer D. , Balooch M. , Issa I. , Bachmaier A. , Hosemann P. , Kiener D. :The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag In: Materials Characterization 171 (2021 ), Article No.: 110822 ISSN: 1044-5803 DOI: 10.1016/j.matchar.2020.110822
Xie Z. , Chauraud D. , Bitzek E. , Korte-Kerzel S. , Guénolé J. :Laves phase crystal analysis (LaCA): Atomistic identification of lattice defects in C14 and C15 topologically close-packed phases In: Journal of Materials Research (2021 )ISSN: 0884-2914 DOI: 10.1557/s43578-021-00237-y
Zhao M. , Schlueter K. , Wurmshuber M. , Reitgruber M. , Kiener D. :Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength In: Materials & Design 197 (2021 ), Article No.: 109187 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2020.109187
Zhu Y. , Ameyama K. , Anderson PM. , Beyerlein IJ. , Gao H. , Kim HS. , Lavernia E. , Mathaudhu S. , Mughrabi H. , Ritchie RO. , Tsuji N. , Zhang X. , Wu X. :Heterostructured materials: superior properties from hetero-zone interaction In: Materials Research Letters 9 (2021 ), p. 1-31 ISSN: 2166-3831 DOI: 10.1080/21663831.2020.1796836
2020
Atila A. , Kbirou M. , Ouaskit S. , Hasnaoui A. :On the presence of nanoscale heterogeneity in Al70Ni15Co15 metallic glass under pressure In: Journal of Non-Crystalline Solids 550 (2020 ), Article No.: 120381 ISSN: 0022-3093 DOI: 10.1016/j.jnoncrysol.2020.120381
Bach J. , Stoiber M. , Schindler L. , Höppel HW. , Göken M. :Deformation mechanisms and strain rate sensitivity of bimodal and ultrafine-grained copper In: Acta Materialia 186 (2020 ), p. 363-373 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2019.12.044
Bezold A. , Volz N. , Xue F. , Zenk CH. , Neumeier S. , Göken M. :On the Precipitation-Strengthening Contribution of the Ta-Containing Co3(Al,W)-Phase to the Creep Properties of γ/γ′ Cobalt-Base Superalloys In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 51 (2020 ), p. 1567-1574 ISSN: 1073-5623 DOI: 10.1007/s11661-020-05626-2
Brandt S. , Faßbender ML. , Klemd R. , Macauley C. , Felfer P. , Haase K. :Cumulate olivine: A novel host for heavy rare earth element mineralization In: Geology 49 (2020 )ISSN: 0091-7613 DOI: 10.1130/G48417.1
Cautaerts N. , Delville R. , Stergar E. , Pakarinen J. , Verwerft M. , Yang Y. , Hofer C. , Schnitzer R. , Lamm S. , Felfer P. , Schryvers D. :The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study In: Acta Materialia 197 (2020 ), p. 184-197 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2020.07.022
Diehl M. , Wang D. , Liu C. , Rezaei Mianroodi J. , Han F. , Ma D. , Kok PJ. , Roters F. , Shanthraj P. :Solving Material Mechanics and Multiphysics Problems of Metals with Complex Microstructures Using DAMASK—The Düsseldorf Advanced Material Simulation Kit In: Advanced Engineering Materials (2020 ), Article No.: 1901044 ISSN: 1438-1656 DOI: 10.1002/adem.201901044
Diepold B. , Vorlaufer N. , Neumeier S. , Gartner T. , Göken M. :Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718 In: International Journal of Minerals, Metallurgy and Materials 27 (2020 ), p. 640-648 ISSN: 1674-4799 DOI: 10.1007/s12613-020-1991-6
Fuger C. , Schwartz B. , Wojcik T. , Moraes V. , Weiss M. , Limbeck A. , Macauley C. , Hunold O. , Polcik P. , Primetzhofer D. , Felfer P. , Mayrhofer PH. , Riedl H. :Influence of Ta on the oxidation resistance of WB2−z coatings In: Journal of Alloys and Compounds (2020 ), Article No.: 158121 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2020.158121
Förner A. , Giese S. , Arnold C. , Felfer P. , Körner C. , Neumeier S. , Göken M. :Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting In: Scientific Reports 10 (2020 ), Article No.: 15153 ISSN: 2045-2322 DOI: 10.1038/s41598-020-72093-5
Gabel S. , Merle B. :Small-scale high-cycle fatigue testing by dynamic microcantilever bending In: MRS Communications (2020 )ISSN: 2159-6859 DOI: 10.1557/mrc.2020.31 URL: https://link.springer.com/content/pdf/10.1557/mrc.2020.31.pdf
Giese S. , Bezold A. , Pröbstle M. , Heckl A. , Neumeier S. , Göken M. :The Importance of Diffusivity and Partitioning Behavior of Solid Solution Strengthening Elements for the High Temperature Creep Strength of Ni-Base Superalloys In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020 )ISSN: 1073-5623 DOI: 10.1007/s11661-020-06028-0
Gulden F. , Reinhold B. , Gramstat S. , Stich A. , Tetzlaff U. , Höppel HW. :Investigation of the run-in and corrosion behavior of a PEO-coated aluminum brake disc 10th International Munich Chassis Symposium (Chassis.Tech Plus) (Munich )In: 10TH INTERNATIONAL MUNICH CHASSIS SYMPOSIUM 2019 (CHASSIS.TECH PLUS) , WIESBADEN : 2020 DOI: 10.1007/978-3-658-26435-2_43
Guénolé J. , Nöhring WG. , Vaid A. , Houlle F. , Xie Z. , Prakash A. , Bitzek E. :Assessment and optimization of the fast inertial relaxation engine (FIRE) for energy minimization in atomistic simulations and its implementation in LAMMPS In: Computational Materials Science 175 (2020 ), Article No.: 109584 ISSN: 0927-0256 DOI: 10.1016/j.commatsci.2020.109584
Hausmann D. , Solís C. , Freund L. , Volz N. , Heinemann A. , Göken M. , Gilles R. , Neumeier S. :Enhancing the high-temperature strength of a Co-base superalloy by optimizing the γ/γ' microstructure In: Metals 10 (2020 ), Article No.: 321 ISSN: 2075-4701 DOI: 10.3390/met10030321
Haußmann L. , Neumeier S. , Kolb M. , Ast J. , Mohanty G. , Michler J. , Göken M. :Local Mechanical Properties at the Dendrite Scale of Ni-Based Superalloys Studied by Advanced High Temperature Indentation Creep and Micropillar Compression Tests 14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA , 12. September 2021 - 16. September 2021 )In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (ed.): Minerals, Metals and Materials Series 2020 DOI: 10.1007/978-3-030-51834-9_26
He J. , Zenk C. , Zhou X. , Neumeier S. , Raabe D. , Gault B. , Makineni SK. :On the atomic solute diffusional mechanisms during compressive creep deformation of a Co-Al-W-Ta single crystal superalloy In: Acta Materialia 184 (2020 ), p. 86-99 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2019.11.035
Höppel HW. , Westermeyer M. , Kümmel F. , Göken M. :The Role of Interfaces on the Deformation Mechanisms in Bimodal Al Laminates Produced by Accumulative Roll Bonding In: Advanced Engineering Materials (2020 )ISSN: 1438-1656 DOI: 10.1002/adem.202000145
Kabir A. , Espineira-Cachaza M. , Fiordaliso EM. , Ke D. , Grasso S. , Merle B. , Esposito V. :Effect of cold sintering process (CSP) on the electro-chemo-mechanical properties of Gd-doped ceria (GDC) In: Journal of the European Ceramic Society 40 (2020 ), p. 5612-5618 ISSN: 0955-2219 DOI: 10.1016/j.jeurceramsoc.2020.06.010
Kabir A. , Kyu Han J. , Merle B. , Esposito V. :The role of oxygen defects on the electro-chemo-mechanical properties of highly defective gadolinium doped ceria In: Materials Letters 266 (2020 ), Article No.: 127490 ISSN: 0167-577X DOI: 10.1016/j.matlet.2020.127490
Kalsar R. , Yadav D. , Sharma A. , Brokmeier HG. , May J. , Höppel HW. , Skrotzki W. , Suwas S. :Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 797 (2020 ), Article No.: 140088 ISSN: 0921-5093 DOI: 10.1016/j.msea.2020.140088
Kirchmayer A. , Lyu H. , Pröbstle M. , Houlle F. , Förner A. , Huenert D. , Göken M. , Felfer P. , Bitzek E. , Neumeier S. :Combining Experiments and Atom Probe Tomography-Informed Simulations on γ′ Precipitation Strengthening in the Polycrystalline Ni-Base Superalloy A718Plus In: Advanced Engineering Materials (2020 )ISSN: 1438-1656 DOI: 10.1002/adem.202000149
Krauß S. , Schieß T. , Göken M. , Merle B. :Revealing the local fatigue behavior of bimodal copper laminates by micropillar fatigue tests In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 788 (2020 ), Article No.: 139502 ISSN: 0921-5093 DOI: 10.1016/j.msea.2020.139502
Kubacka D. , Eggeler Y. , Volz N. , Neumeier S. , Spiecker E. :Using Rapid Thermal Annealing for Studying Early Stages of High-Temperature Oxidation of Superalloys DOI: 10.1007/978-3-030-51834-9_74
Lee S. , Vaid A. , Im J. , Kim B. , Prakash A. , Guenole J. , Kiener D. , Bitzek E. , Oh SH. :In-situ observation of the initiation of plasticity by nucleation of prismatic dislocation loops In: Nature Communications 11 (2020 ), Article No.: 2367 ISSN: 2041-1723 DOI: 10.1038/s41467-020-15775-y
Lenz M. , Wu M. , He J. , Makineni SK. , Gault B. , Raabe D. , Neumeier S. , Spiecker E. :Atomic Structure and Chemical Composition of Planar Fault Structures in Co-Base Superalloys 14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA , 12. September 2021 - 16. September 2021 )In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (ed.): Minerals, Metals and Materials Series 2020 DOI: 10.1007/978-3-030-51834-9_90
Lepple M. , Ushakov SV. , Lilova K. , Macauley C. , Fernandez AN. , Levi CG. , Navrotsky A. :Thermochemistry and phase stability of the polymorphs of yttrium tantalate, YTaO4 In: Journal of the European Ceramic Society (2020 )ISSN: 0955-2219 DOI: 10.1016/j.jeurceramsoc.2020.10.039
Löffl C. , Saage H. , Göken M. :The influence of near service environmental conditions on the corrosion and LCF behaviour of a beta-stabilized γ-TiAl alloy In: Corrosion Science 175 (2020 ), Article No.: 108885 ISSN: 0010-938X DOI: 10.1016/j.corsci.2020.108885
Marian M. , Song GC. , Wang B. , Fuenzalida VM. , Krauß S. , Merle B. , Tremmel S. , Wartzack S. , Yu J. , Rosenkranz A. :Effective usage of 2D MXene nanosheets as solid lubricant – Influence of contact pressure and relative humidity In: Applied Surface Science 531 (2020 ), p. 1-10 ISSN: 0169-4332 DOI: 10.1016/j.apsusc.2020.147311 URL: https://www.sciencedirect.com/science/article/pii/S0169433220320687?dgcid=coauthor
Marti N. , Reller C. , Macauley C. , Löffler M. , Reichert A. , Reichbauer T. , Vetter KM. , Schmid B. , Mclaughlin D. , Leidinger P. , Reinisch D. , Vogl C. , Mayrhofer K. , Katsounaros I. , Schmid G. :Ag2Cu2O3- a catalyst template material for selective electroreduction of CO to C(2+)products In: Energy and Environmental Science 13 (2020 ), p. 2993-3006 ISSN: 1754-5692 DOI: 10.1039/d0ee01100b
Merle B. , Higgins WH. , Pharr GM. :Extending the range of constant strain rate nanoindentation testing In: Journal of Materials Research (2020 )ISSN: 0884-2914 DOI: 10.1557/jmr.2019.408 URL: https://link.springer.com/content/pdf/10.1557/jmr.2019.408.pdf
Mughrabi H. :Revisiting “Steady-State” Monotonic and Cyclic Deformation: Emphasizing the Quasi-Stationary State of Deformation In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020 )ISSN: 1073-5623 DOI: 10.1007/s11661-019-05618-x
Penk D. , Müller J. , Felfer P. , Grosso R. , Stamminger M. :Visualization Aided Interface Reconstruction VMV 2020, 25th International Symposium on Vision, Modeling, and Visualization (Tübingen , 28. September 2020 - 1. October 2020 )
Schirmer T. , Ließmann W. , Macauley C. , Felfer P. :Indium and antimony distribution in a sphalerite from the “burgstaetter gangzug” of the upper harz mountains pb-zn mineralization In: Minerals 10 (2020 ), p. 1-19 ISSN: 2075-163X DOI: 10.3390/min10090791
Stückler M. , Weissitsch L. , Wurster S. , Felfer P. , Krenn H. , Pippan R. , Bachmaier A. :Magnetic dilution by severe plastic deformation In: AIP Advances 10 (2020 ), Article No.: 015210 ISSN: 2158-3226 DOI: 10.1063/1.5128058
Tinoco HA. , Hutař P. , Merle B. , Göken M. , Kruml T. :Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge test 18th International Conference on Fracture and Damage Mechanics, FDM 2019 (Rhodes , 16. September 2019 - 18. September 2019 )In: Key Engineering Materials 2020 DOI: 10.4028/www.scientific.net/KEM.827.196
Travitzky N. , Boccaccini AR. , Göken M. :The Department of Materials Science and Engineering at the Friedrich-Alexander-University of Erlangen-Nürnberg In: Advanced Engineering Materials 22 (2020 ), Article No.: 2000921 ISSN: 1438-1656 DOI: 10.1002/adem.202000921
Volz N. , Zenk C. , Halvaci T. , Matuszewska K. , Neumeier S. , Göken M. :Castability and Recrystallization Behavior of γ′-Strengthened Co-Base Superalloys DOI: 10.1007/978-3-030-51834-9_88
Wang YF. , Huang CX. , Fang XT. , Höppel HW. , Göken M. , Zhu YT. :Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient In: Scripta Materialia 174 (2020 ), p. 19-23 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2019.08.022
Xie Z. , Shin J. , Renner J. , Prakash A. , Gianola DS. , Bitzek E. :Origins of strengthening and failure in twinned Au nanowires: Insights from in−situ experiments and atomistic simulations In: Acta Materialia 187 (2020 ), p. 166-175 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2020.01.038
Xue F. , Zenk C. , Freund L. , Neumeier S. , Göken M. :Understanding raft formation and precipitate shearing during double minimum creep in a γ′-strengthened single crystalline Co-base superalloy In: Philosophical Magazine (2020 )ISSN: 1478-6443 DOI: 10.1080/14786435.2020.1836415
Zenk C. , Volz N. , Bezold A. , Huber LK. , Eggeler Y. , Spiecker E. , Göken M. , Neumeier S. :The Effect of Alloying on the Thermophysical and Mechanical Properties of Co–Ti–Cr-Based Superalloys DOI: 10.1007/978-3-030-51834-9_89
Zenk C. , Volz N. , Zenk C. , Felfer P. , Neumeier S. :Impact of the Co/Ni-Ratio on Microstructure, Thermophysical Properties and Creep Performance of Multi-Component γ′-Strengthened Superalloys In: Crystals 10 (2020 ), p. 1058 ISSN: 2073-4352 DOI: 10.3390/cryst10111058
Zhao M. , Issa I. , Pfeifenberger M. , Wurmshuber M. , Kiener D. :Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution In: Acta Materialia 182 (2020 ), p. 215-225 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2019.10.030
Zomorodpoosh S. , Volz N. , Neumeier S. , Roslyakova I. :Application of change-point analysis to the selection of representative data in creep experiments In: Journal of Physics Communications 4 (2020 ), p. 1-11 ISSN: 2399-6528 DOI: 10.1088/2399-6528/aba7ff
2019
Ast J. , Ghidelli M. , Durst K. , Göken M. , Sebastiani M. , Korsunsky AM. :A review of experimental approaches to fracture toughness evaluation at the micro-scale In: Materials and Design 173 (2019 ), Article No.: 107762 ISSN: 0261-3069 DOI: 10.1016/j.matdes.2019.107762
Atila A. , Ghardi EM. , Hasnaoui A. , Ouaskit S. :Alumina effect on the structure and properties of calcium aluminosilicate in the percalcic region: A molecular dynamics investigation In: Journal of Non-Crystalline Solids 525 (2019 ), Article No.: 119470 ISSN: 0022-3093 DOI: 10.1016/j.jnoncrysol.2019.119470
Atila A. , Ghardi EM. , Ouaskit S. , Hasnaoui A. :Atomistic insights into the impact of charge balancing cations on the structure and properties of aluminosilicate glasses In: Physical Review B 100 (2019 )ISSN: 0163-1829 DOI: 10.1103/PhysRevB.100.144109
Bachmaier A. , Hohenwarter A. , Höppel HW. , Ivanisenko J. :Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures In: Advanced Engineering Materials 21 (2019 ), Article No.: ARTN 1801073 ISSN: 1438-1656 DOI: 10.1002/adem.201801073
Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklencka V. :Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu-Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 T-m In: Metals 9 (2019 )ISSN: 2075-4701 DOI: 10.3390/met9111150
Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklenicka V. :Quasi-Stationary Strength of ECAP-Processed Cu-Zr at 0.5 T-m In: Metals 9 (2019 )ISSN: 2075-4701 DOI: 10.3390/met9111149
Bresler J. , Neumeier S. , Ziener M. , Pyczak F. , Göken M. :The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar gamma/alpha(2) titanium aluminides In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 (2019 ), p. 46-53 ISSN: 0921-5093 DOI: 10.1016/j.msea.2018.11.152
Bresler J. , Neumeier S. , Ziener M. , Pyczak F. , Göken M. :The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 (2019 ), p. 46-53 ISSN: 0921-5093 DOI: 10.1016/j.msea.2018.11.152
Bykov M. , Chariton S. , Fei H. , Fedotenko T. , Aprilis G. , Ponomareva AV. , Tasnádi F. , Abrikosov IA. , Merle B. , Feldner P. , Vogel S. , Schnick W. , Prakapenka VB. , Greenberg E. , Hanfland M. , Pakhomova A. , Liermann HP. , Katsura T. , Dubrovinskaia N. , Dubrovinsky L. :High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re2(N2)(N)2 stable at ambient conditions In: Nature Communications 10 (2019 ), Article No.: 2994 ISSN: 2041-1723 DOI: 10.1038/s41467-019-10995-3
Böhm C. , Feldner P. , Merle B. , Wolf S. :Conical nanoindentation allows azimuthally independent hardness determination in geological and biogenic minerals In: Materials 12 (2019 ), Article No.: 1630 ISSN: 1996-1944 DOI: 10.3390/ma12101630
Frydrych K. , Kowalczyk-Gajewska K. , Prakash A. :On solution mapping and remeshing in crystal plasticity finite element simulations: application to equal channel angular pressing In: Modelling and Simulation in Materials Science and Engineering 27 (2019 )ISSN: 0965-0393 DOI: 10.1088/1361-651X/ab28e3
Giese S. , Kern F. , Macauley C. , Neumeier S. , Göken M. :Fracture resistance of yttria stabilized zirconia manufactured from stabilizer-coated nanopowder by micro cantilever bending tests In: Journal of the European Ceramic Society (2019 )ISSN: 0955-2219 DOI: 10.1016/j.jeurceramsoc.2019.05.006
Giese S. , Neumeier S. , Amberger-Matschkal D. , Bergholz J. , Vaßen R. , Göken M. :Microtensile creep testing of freestanding MCrAlY bond coats In: Journal of Materials Research (2019 )ISSN: 0884-2914 DOI: 10.1557/jmr.2019.169
Giese S. , Neumeier S. , Bergholz J. , Naumenko D. , Quadakkers WJ. , Vassen R. , Göken M. :Influence of Different Annealing Atmospheres on the Mechanical Properties of Freestanding MCrAlY Bond Coats Investigated by Micro-Tensile Creep Tests In: Metals 9 (2019 )ISSN: 2075-4701 DOI: 10.3390/met9060692
Glöckel F. , Uggowitzer PJ. , Felfer P. , Pogatscher S. , Höppel HW. :Influence of Zn and Sn on the precipitation behavior of new Al-Mg-Si alloys In: Materials 12 (2019 ), Article No.: 2547 ISSN: 1996-1944 DOI: 10.3390/ma12162547
Gonzalez-Gutierrez J. , Thompson Y. , Cano S. , Felfer P. , Kukla C. , Holzer C. :Steel parts produced by material extrusion additive manufacturing, solvent debiding and sintering Materials Science and Technology 2019, MS and T 2019 (Portland, OR , 29. September 2019 - 3. October 2019 )In: MS and T 2019 - Materials Science and Technology 2019 2019 DOI: 10.7449/2019/MST_2019_264_266
Guillonneau G. , Wheeler JM. , Wehrs J. , Philippe L. , Baral P. , Höppel HW. , Göken M. , Michler J. :Determination of the true projected contact area by in situ indentation testing In: Journal of Materials Research 34 (2019 ), p. 2859-2868 ISSN: 0884-2914 DOI: 10.1557/jmr.2019.236
Hou X. , Krauß S. , Merle B. :Additional grain boundary strengthening in length-scale architectured copper with ultrafine and coarse domains In: Scripta Materialia 165 (2019 ), p. 55-59 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2019.02.019
Karewar S. , Sietsma J. , Santofimia MJ. :Effect of C on the Martensitic Transformation in Fe-C Alloys in the Presence of Pre-Existing Defects: A Molecular Dynamics Study In: Crystals 9 (2019 )ISSN: 2073-4352 DOI: 10.3390/cryst9020099
Katnagallu S. , Stephenson LT. , Mouton I. , Freysoldt C. , Subramanyam APA. , Jenke J. , Ladines AN. , Neumeier S. , Hammerschmidt T. , Drautz R. , Neugebauer J. , Vurpillot F. , Raabe D. , Gault B. :Imaging individual solute atoms at crystalline imperfections in metals In: New Journal of Physics 21 (2019 )ISSN: 1367-2630 DOI: 10.1088/1367-2630/ab5cc4
Lamm S. , Matschkal D. , Göken M. , Felfer P. :Impact of Mn on the precipitate structure and creep resistance of Ca containing magnesium alloys In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 761 (2019 ), Article No.: 137964 ISSN: 0921-5093 DOI: 10.1016/j.msea.2019.05.094
Lenz M. , Eggeler Y. , Müller J. , Zenk C. , Volz N. , Wollgramm P. , Eggeler G. , Neumeier S. , Göken M. , Spiecker E. :Tension/Compression asymmetry of a creep deformed single crystal Co-base superalloy In: Acta Materialia 166 (2019 ), p. 597-610 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2018.12.053
Löffl C. , Saage H. , Göken M. :In situ X-ray tomography investigation of the crack formation in an intermetallic beta-stabilized TiAl-alloy during a stepwise tensile loading In: International Journal of Fatigue 124 (2019 ), p. 138-148 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2019.02.035
Martić N. , Reller C. , Macauley C. , Löffler M. , Schmid B. , Reinisch D. , Volkova E. , Maltenberger A. , Rucki A. , Mayrhofer K. , Schmid G. :Paramelaconite-Enriched Copper-Based Material as an Efficient and Robust Catalyst for Electrochemical Carbon Dioxide Reduction In: Advanced Energy Materials (2019 ), Article No.: 1901228 ISSN: 1614-6832 DOI: 10.1002/aenm.201901228
Matschkal D. , Kolb M. , Neumeier S. , Gao S. , Hartmaier A. , Durst K. , Göken M. :New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures In: Materials & Design 183 (2019 ), Article No.: 108090 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2019.108090
McCarroll IE. , Haley D. , Thomas S. , Meier M. , Bagot PA. , Moody MP. , Birbilis N. , Cairney JM. :The effect of hydrogen on the early stages of oxidation of a magnesium alloy In: Corrosion Science (2019 ), Article No.: 108391 ISSN: 0010-938X DOI: 10.1016/j.corsci.2019.108391
Merle B. :Creep behavior of gold thin films investigated by bulge testing at room and elevated temperature In: Journal of Materials Research 34 (2019 ), p. 69-77 ISSN: 0884-2914 DOI: 10.1557/jmr.2018.287
Merle B. , Higgins WH. , Pharr GM. :Critical issues in conducting constant strain rate nanoindentation tests at higher strain rates In: Journal of Materials Research (2019 )ISSN: 0884-2914 DOI: 10.1557/jmr.2019.292
Mueller T. , Kapp MW. , Bachmaier A. , Felfer P. , Pippan R. :Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion In: Acta Materialia 166 (2019 ), p. 168-177 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2018.12.028
Preiß E. , Lyu H. , Liebig JP. , Richter G. , Gannott F. , Gruber PA. , Göken M. , Bitzek E. , Merle B. :Microstructural dependence of the fracture toughness of metallic thin films: A bulge test and atomistic simulation study on single-crystalline and polycrystalline silver films In: Journal of Materials Research 34 (2019 ), p. 3483-3494 ISSN: 0884-2914 DOI: 10.1557/jmr.2019.262 URL: https://www.cambridge.org/core/journals/journal-of-materials-research/article/microstructural-dependence-of-the-fracture-toughness-of-metallic-thin-films-a-bulge-test-and-atomistic-simulation-study-on-singlecrystalline-and-polycrystalline-silver-films/73FEF9FD56EFF314E1366003EFFE8C5B#
Schreiner J. , Götz-Neunhoeffer F. , Neubauer J. , Bergold S. , Webler R. , Volkmann S. , Jansen D. :Advanced Rietveld refinement and SEM analysis of tobermorite in
chemically diverse autoclaved aerated concrete In: Powder Diffraction (2019 )ISSN: 0885-7156 DOI: 10.1017/S0885715619000149
Schunk C. , Nitschky M. , Höppel HW. , Göken M. :Superior Mechanical Properties of Aluminum-Titanium Laminates in Terms of Local Hardness and Strength In: Advanced Engineering Materials 21 (2019 ), Article No.: ARTN 1800546 ISSN: 1438-1656 DOI: 10.1002/adem.201800546
Thompson Y. , Gonzalez-Gutierrez J. , Kukla C. , Felfer P. :Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel In: Additive Manufacturing 30 (2019 ), Article No.: 100861 ISSN: 2214-7810 DOI: 10.1016/j.addma.2019.100861
Vaid A. , Guenole J. , Prakash A. , Korte-Kerzel S. , Bitzek E. :Atomistic simulations of basal dislocations in Mg interacting with Mg17Al12 precipitates In: Materialia 7 (2019 ), Article No.: 100355 ISSN: 2589-1529 DOI: 10.1016/j.mtla.2019.100355 URL: https://www.sciencedirect.com/science/article/pii/S2589152919301516?via=ihub
Weiser M. , Chater RJ. , Shollock BA. , Virtanen S. :Transport mechanisms during the high-temperature oxidation of ternary γ/γ′ Co-base model alloys In: npj Materials Degradation 3 (2019 ), p. 1-11 ISSN: 2397-2106 DOI: 10.1038/s41529-019-0096-z
Weiser M. , Galetz MC. , Zschau HE. , Zenk C. , Neumeier S. , Göken M. , Virtanen S. :Influence of Co to Ni ratio in γ′-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C In: Corrosion Science (2019 )ISSN: 0010-938X DOI: 10.1016/j.corsci.2019.05.007
Weiß L. , Wensing M. , Engl N. , Siegel F. , Tilinski M. , Zülow D. , Passily L. :Local Heat Transfer and Interdependency of Piston Material, Spray and Combustion in High Power Diesel Engines Workshop ENCOM 2019, Waischenfeld, 16./17.10.2019 (Fraunhofer Forschungscampus Waischenfeld , 16. July 2019 - 17. July 2019 )
Wurmshuber M. , Doppermann S. , Wurster S. , Kiener D. :Ultrafine-grained Tungsten by High-Pressure Torsion - Bulk precursor versus powder processing route 40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D DOI: 10.1088/1757-899X/580/1/012051
Zenk C. , Gibson JS. , Maier-Kiener V. , Neumeier S. , Göken M. , Korte-Kerzel S. :Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements In: Acta Materialia 181 (2019 ), p. 385-398 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2019.09.008
Zhou H. , Huang C. , Sha X. , Xiao L. , Ma X. , Höppel HW. , Göken M. , Wu X. , Ameyama K. , Han X. , Zhu Y. :In-situ observation of dislocation dynamics near heterostructured interfaces In: Materials Research Letters 7 (2019 ), p. 376-382 ISSN: 2166-3831 DOI: 10.1080/21663831.2019.1616330
2018
Bachmann J. , Göken M. , Höppel HW. :Fatigue of low alloyed carbon steels in the HCF/VHCF-regimes In: Hans-Jürgen Christ (ed.): Fatigue of Materials at Very High Numbers of Loading Cycles , Wiesbaden : Springer Spektrum , 2018 , p. 1-23 ISBN: 9783658245306 DOI: 10.1007/978-3-658-24531-3_1
Barr CM. , Felfer P. , Cole JI. , Taheri ML. :Observation of oscillatory radiation induced segregation profiles at grain boundaries in neutron irradiated 316 stainless steel using atom probe tomography In: Journal of Nuclear Materials 504 (2018 ), p. 181-190 ISSN: 0022-3115 DOI: 10.1016/j.jnucmat.2018.01.053
Biggemann J. , Diepold B. , Pezoldt M. , Stumpf M. , Greil P. , Fey T. :Automated 3D assembly of periodic alumina-epoxy composite structures In: Journal of the American Ceramic Society (2018 )ISSN: 0002-7820 DOI: 10.1111/jace.15586
Blum W. :Discussion: Activation volumes of plastic deformation of crystals In: Scripta Materialia 146 (2018 ), p. 27-30 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2017.10.029
Carton-Cordero M. , Campos M. , Freund L. , Kolb M. , Neumeier S. , Göken M. , Torralba JM. :Microstructure and compression strength of Co-based superalloys hardened by γ′ and carbide precipitation In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 734 (2018 ), p. 437-444 ISSN: 0921-5093 DOI: 10.1016/j.msea.2018.08.007
Cormier J. , Rae C. , Neumeier S. , Hardy M. , Reed R. :Superalloys and Their Applications Foreword In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018 ), p. 3763-3763 ISSN: 1073-5623 DOI: 10.1007/s11661-018-4803-0 (anderer)
Feldner P. , Merle B. , Göken M. :Superplastic deformation behavior of Zn-22% Al alloy investigated by nanoindentation at elevated temperatures In: Materials & Design 153 (2018 ), p. 71-79 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2018.05.008
Felfer P. , Cairney J. :Advanced concentration analysis of atom probe tomography data: Local proximity histograms and pseudo-2D concentration maps In: Ultramicroscopy 189 (2018 ), p. 61-64 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2018.03.011
Felfer P. , Sandfeld S. :Digitalisation in Materials Science – Combining Experiments and Simulation Across Length Scales In: Praktische Metallographie 55 (2018 ), p. 492- ISSN: 0032-678X DOI: 10.3139/147.018081
Felfer P. , Stephenson LT. , Li T. :Atom Probe Tomography In: Praktische Metallographie 55 (2018 ), p. 515-526 ISSN: 0032-678X DOI: 10.3139/147.110543
Freund L. , Stark A. , Kirchmayer A. , Schell N. , Pyczak F. , Göken M. , Neumeier S. :The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018 ), p. 4070-4078 ISSN: 1073-5623 DOI: 10.1007/s11661-018-4757-2
Freund L. , Stark A. , Pyczak F. , Schell N. , Göken M. , Neumeier S. :The grain boundary pinning effect of the mu phase in an advanced polycrystalline γ/γ′ Co-base superalloy In: Journal of Alloys and Compounds 753 (2018 ), p. 333-342 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2018.04.204
Freund L. , Stark A. , Pyczak F. , Schell N. , Göken M. , Neumeier S. :The grain boundary pinning effect of the μ phase in an advanced polycrystalline γ/γ′ Co-base superalloy In: Journal of Alloys and Compounds 753 (2018 ), p. 333-342 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2018.04.204
Gulden F. , Gramstat S. , Stich A. , Höppel HW. , Tetzlaff U. :Properties and Limitation of an Oxide Coated Aluminum Brake Rotor In: SAE Technical Papers (2018 ), Article No.: 2018-01-1877 ISSN: 0148-7191 DOI: 10.4271/2018-01-1877
Houlle F. , Walsh F. , Prakash A. , Bitzek E. :Atomistic Simulations of Compression Tests on gamma-Precipitate Containing Ni3Al Nanocubes In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018 ), p. 4158-4166 ISSN: 1073-5623 DOI: 10.1007/s11661-018-4706-0
Huang CX. , Wang YF. , Ma XL. , Yin S. , Höppel HW. , Göken M. , Wu XL. , Gao HJ. , Zhu YT. :Interface affected zone for optimal strength and ductility in heterogeneous laminate In: Materials Today 21 (2018 ), p. 713-719 ISSN: 1369-7021 DOI: 10.1016/j.mattod.2018.03.006
Khansur NH. , Eckstein U. , Benker L. , Deisinger U. , Merle B. , Webber KG. :Room temperature deposition of functional ceramic films on low-cost metal substrate In: Ceramics International 44 (2018 ), p. 16295-16301 ISSN: 0272-8842 DOI: 10.1016/j.ceramint.2018.06.027
Kimmel AC. , Malkowski TF. , Griffiths S. , Hertweck B. , Steigerwald T. , Freund L. , Neumeier S. , Göken M. , Speck JS. , Schlücker E. :High-temperature corrosion of Inconel (R) Alloy 718, Haynes (R) 282 (R) Alloy and CoWAlloy1&2 in supercritical ammonia/ammonium chloride solutio In: Journal of Crystal Growth 498 (2018 ), p. 289-300 ISSN: 0022-0248 DOI: 10.1016/j.jcrysgro.2018.06.018
Kolb M. , Freund L. , Fischer F. , Povstugar I. , Makineni SK. , Gault B. , Raabe D. , Müller J. , Spiecker E. , Neumeier S. , Göken M. :On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys In: Acta Materialia (2018 ), p. 247-254 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2017.12.020
Kümmel F. , Diepold B. , Prakash A. , Höppel HW. , Göken M. :Enhanced monotonic and cyclic mechanical properties of ultrafine-grained laminated metal composites with strong and stiff interlayers In: International Journal of Fatigue 116 (2018 ), p. 379-387 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2018.06.043
Kümmel F. , Diepold B. , Sauer KF. , Schunk C. , Prakash A. , Höppel HW. , Göken M. :High Lightweight Potential of Ultrafine-Grained Aluminum/Steel Laminated Metal Composites Produced by Accumulative Roll Bonding In: Advanced Engineering Materials (2018 )ISSN: 1438-1656 DOI: 10.1002/adem.201800286
Li T. , Kasian O. , Cherevko S. , Zhang S. , Geiger S. , Scheu C. , Felfer P. , Raabe D. , Gault B. , Mayrhofer K. :Atomic-scale insights into surface species of electrocatalysts in three dimensions In: Nature Catalysis 1 (2018 ), p. 300-305 ISSN: 2520-1158 DOI: 10.1038/s41929-018-0043-3
Liebig JP. , Krauß S. , Göken M. , Merle B. :Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression In: Acta Materialia 154 (2018 ), p. 261-272 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2018.05.037
Macauley C. , Fernandez AN. , Van Sluytman JS. , Levi CG. :Phase equilibria in the ZrO2-YO1.5-TaO2.5 system at 1250 degrees C In: Journal of the European Ceramic Society 38 (2018 ), p. 4523-4532 ISSN: 0955-2219 DOI: 10.1016/j.jeurceramsoc.2018.06.010
Makineni SK. , Kumar A. , Lenz M. , Kontis P. , Meiners T. , Zenk C. , Zaefferer S. , Eggeler G. , Neumeier S. , Spiecker E. , Raabe D. , Gault B. :On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal CoNi-based superalloy In: Acta Materialia (2018 ), p. 362-371 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2018.05.074
Makineni SK. , Lenz M. , Kontis P. , Li Z. , Kumar A. , Felfer P. , Neumeier S. , Herbig M. , Spiecker E. , Raabe D. , Gault B. :Correlative Microscopy-Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys In: JOM Journal of the Minerals, Metals and Materials Society 70 (2018 ), p. 1736-1743 ISSN: 1047-4838 DOI: 10.1007/s11837-018-2802-7
Makineni SK. , Lenz M. , Kontis P. , Li Z. , Kumar A. , Felfer P. , Neumeier S. , Herbig M. , Spiecker E. , Raabe D. , Gault B. :Correlative Microscopy—Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys In: JOM Journal of the Minerals, Metals and Materials Society (2018 ), p. 1-8 ISSN: 1047-4838 DOI: 10.1007/s11837-018-2802-7
Makineni SK. , Lenz M. , Neumeier S. , Spiecker E. , Raabe D. , Gault B. :Elemental segregation to antiphase boundaries in a crept CoNi-based single crystal superalloy In: Scripta Materialia (2018 ), p. 62-66 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2018.07.042
Mccarroll I. , Scherrer B. , Felfer P. , Moody MP. , Cairney JM. :Interpreting Atom Probe Data from Oxide-Metal Interfaces In: Microscopy and Microanalysis 24 (2018 ), p. 342-349 ISSN: 1431-9276 DOI: 10.1017/S1431927618012370
Medvedev AE. , Lapovok R. , Koch E. , Höppel HW. , Göken M. :Optimisation of interface formation by shear inclination: Example of aluminium-cooper hybrid produced by ECAP with back-pressure In: Materials & Design 146 (2018 ), p. 142-151 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2018.03.021
Medvedev AE. , Lapovok R. , Koch E. , Höppel HW. , Göken M. :Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure In: Materials & Design 146 (2018 ), p. 142-151 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2018.03.021
Merle B. , Höppel HW. :Microscale High-Cycle Fatigue Testing by Dynamic Micropillar Compression Using Continuous Stiffness Measurement In: Experimental Mechanics 58 (2018 ), p. 465-474 ISSN: 0014-4851 DOI: 10.1007/s11340-017-0362-3
Merle B. , Kraus X. , Tallawi M. , Scharfe B. , El Fray M. , Aifantis KE. , Boccaccini AR. , Göken M. :Dynamic mechanical characterization of poly(glycerol sebacate)/poly (butylene succinate-butylene dilinoleate) blends for cardiac tissue engineering by flat punch nanoindentation In: Materials Letters 221 (2018 ), p. 115-118 ISSN: 0167-577X DOI: 10.1016/j.matlet.2018.03.051
Möller J. , Bitzek E. :Atomic-scale modeling of elementary processes during the fatigue of metallic materials: from crack initiation to crack-microstructure interactions In: Christ, Hans-Jürgen (ed.): Fatigue of Materials at Very High Numbers of Loading Cycles - Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment , Wiesbaden : Springer Spektrum , 2018 ISBN: 978-3-658-24531-3 DOI: 10.1007/978-3-658-24531-3_2 URL: https://www.springer.com/de/book/9783658245306
Möller J. , Bitzek E. , Janisch R. , ul Hassan H. , Hartmaier A. :Fracture ab initio: A force-based scaling law for atomistically informed continuum models In: Journal of Materials Research 33 (2018 ), p. 3750-3761 ISSN: 0884-2914 DOI: 10.1557/jmr.2018.384 URL: https://www.cambridge.org/core/journals/journal-of-materials-research/article/fracture-ab-initio-a-forcebased-scaling-law-for-atomistically-informed-continuum-models/077AFC469E3C82F3D1A537EA83AEF5F6#
Möller J. , Mrovec M. , Bleskov I. , Neugebauer J. , Hammerschmidt T. , Drautz R. , Elsaesser C. , Hickel T. , Bitzek E. :{110} planar faults in strained bcc metals: Origins and implications of a commonly observed artifact of classical potentials In: Physical Review Materials 2 (2018 )ISSN: 2475-9953 DOI: 10.1103/PhysRevMaterials.2.093606
Preiß E. , Gannott F. , Göken M. , Merle B. :Scaling of the fracture toughness of freestanding metallic thin films with the yield strength In: Materials Research Letters 6 (2018 ), p. 607-612 ISSN: 2166-3831 DOI: 10.1080/21663831.2018.1520749
Schunk C. , Nitschky M. , Höppel HW. , Göken M. :Superior Mechanical Properties of Aluminum–Titanium Laminates in Terms of Local Hardness and Strength In: Advanced Engineering Materials (2018 )ISSN: 1438-1656 DOI: 10.1002/adem.201800546
Volz N. , Zenk C. , Cherukuri R. , Kalfhaus T. , Weiser M. , Makineni SK. , Betzing C. , Lenz M. , Gault B. , Fries SG. , Schreuer J. , Vassen R. , Virtanen S. , Raabe D. , Spiecker E. , Neumeier S. , Göken M. :Thermophysical and Mechanical Properties of Advanced Single Crystalline Co-base Superalloys In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2018 ), p. 1-11 ISSN: 1073-5623 DOI: 10.1007/s11661-018-4705-1
Wurmshuber M. , Frazer D. , Bachmaier A. , Wang Y. , Hosemann P. , Kiener D. :Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag In: Materials & Design 160 (2018 ), p. 1148-1157 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2018.11.007
Xue F. , Zenk C. , Freund L. , Hoelzel M. , Neumeier S. , Göken M. :Double minimum creep in the rafting regime of a single-crystal Co-base superalloy In: Scripta Materialia 142 (2018 ), p. 129-132 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2017.08.039
2017
Ast J. , Göken M. , Durst K. :Size-dependent fracture toughness of tungsten In: Acta Materialia 138 (2017 ), p. 198-211 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2017.07.030
Baranova P. , Bitzek E. :Influence of Atomic-scale Heterogeneties on Fracture Behavior of B2 NiAl In: 14th International Conference on Fracture (ICF 14) 2017
Bitzek E. , Baranova P. , Möller J. :3D Aspects of Fracture and Effects due to Crack Front Curvature In: 14th International Conference on Fracture (ICF 14) 2017
Kral P, Dvorak J, Kvapilova M, Blum W, Sklenicka V:The influence of long-term annealing at room temperature on creep behaviour of ECAP-processed copper In: Materials Letters 188 (2017 ), p. 235-238 ISSN: 0167-577X DOI: 10.1016/j.matlet.2016.11.002
Eder K. , Felfer P. , Gault B. , Ceguerra AV. , La Fontaine A. , Masters AF. , Maschmeyer T. , Cairney JM. :A New Approach to Understand the Adsorption of Thiophene on Different Surfaces: An Atom Probe Investigation of Self-Assembled Monolayers In: Langmuir 33 (2017 ), p. 9573-9581 ISSN: 0743-7463 DOI: 10.1021/acs.langmuir.7b01820
Feldner P. , Merle B. , Göken M. :Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation In: Journal of Materials Research 32 (2017 ), p. 1466-1473 ISSN: 0884-2914 DOI: 10.1557/jmr.2017.69
Fischer C. , Seefried A. , Merle B. , Göken M. , Drummer D. :Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time In: Polymer Engineering and Science 57 (2017 ), p. 121-128 ISSN: 0032-3888 DOI: 10.1002/pen.24394
Freund L. , Giese S. , Schwimmer D. , Höppel HW. , Neumeier S. , Göken M. :High temperature properties and fatigue strength of novel wrought gamma/gamma' Co-base superalloys In: Journal of Materials Research 32 (2017 ), p. 4475-4482 ISSN: 0884-2914 DOI: 10.1557/jmr.2017.315
Freund L. , Messe OMDM. , Barnard JS. , Göken M. , Neumeier S. , Rae CMF. :Segregation assisted microtwinning during creep of a polycrystalline L1(2)-hardened Co-base superalloy In: Acta Materialia 123 (2017 ), p. 295-304 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2016.10.048
Ghanem M. , Göken M. , Merle B. :Plane-strain bulge testing of thin films under compressive residual stresses In: Surface & Coatings Technology 327 (2017 ), p. 167-173 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2017.08.004
Guenole J. , Prakash A. , Bitzek E. :Atomistic simulations of focused ion beam machining of strained silicon In: Applied Surface Science 416 (2017 ), p. 86-95 ISSN: 0169-4332 DOI: 10.1016/j.apsusc.2017.04.027
Gulden F. , Höppel HW. , Göken M. , Stich A. , Gramstat S. :Fundamental Investigations of Aluminium Matrix Composite Brake Rotors for the Use in Passenger Cars In: EuroBreak 2017 (EB2017-MDS-026) 2017
Göken M. , Eggeler G. , Zhu Y. , Lu L. :MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ADVANCED METALLIC ALLOYS IN HONOR OF PROF. HAEL MUGHRABI - PART B - HIGH TEMPERATURE AND NANOMATERIALS Introduction In: Journal of Materials Research 32 (2017 ), p. 4463-4465 ISSN: 0884-2914 DOI: 10.1557/jmr.2017.469
Höppel HW. :Ultrafine-grained Metals MDPI Basel , 2017 ISBN: 978-3-03842-524-3
Höppel HW. , Goik P. , Krechel C. , Göken M. :Ex and in situ investigations on the role of persistent slip bands and grain boundaries in fatigue crack initiation In: Journal of Materials Research 32 (2017 ), p. 4276-4286 ISSN: 0884-2914 DOI: 10.1557/jmr.2017.313
Iqbal F. , Pyczak F. , Neumeier S. , Göken M. :Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 689 (2017 ), p. 11-16 ISSN: 0921-5093 DOI: 10.1016/j.msea.2017.02.017
Kolb M. , Zenk C. , Kirzinger A. , Povstugar I. , Raabe D. , Neumeier S. , Göken M. :Influence of rhenium on γ′-strengthened cobalt-base superalloys In: Journal of Materials Research 32 (2017 ), p. 2551-2559 ISSN: 0884-2914 DOI: 10.1557/jmr.2017.242
Kümmel F. , Höppel HW. , Göken M. :Layer architecture and fatigue life of ultrafine-grained laminated metal composites consisting of different aluminum alloys In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 702 (2017 ), p. 406-413 ISSN: 0921-5093 DOI: 10.1016/j.msea.2017.06.105
Kümmel F. , Tegtmeier TS. , Höppel HW. , Göken M. :Optimized layer architecture for an extended fatigue life of ultrafine-grained AA1050/AA5005 laminated metal composites In: IOP Conference Series: Materials Science and Engineering 194 (2017 ), p. 012036 ISSN: 1757-8981 DOI: 10.1088/1757-899X/194/1/012036
Leitner (Babinsky) K. , Felfer P. , Holec D. , Cairney J. , Knabl W. , Lorich A. , Clemens H. , Primig S. :On grain boundary segregation in molybdenum materials In: Materials & Design 135 (2017 ), p. 204-212 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2017.09.019
Merle B. , Maier-Kiener V. , Pharr GM. :Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation In: Acta Materialia 134 (2017 ), p. 167-176 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2017.05.036
Mikschl F. , Merle B. , Baum M. , Heberle J. , Göken M. , Schmidt M. :Micromechanical characterization of laser consolidated nanoparticle ITO layers In: Thin Solid Films 642 (2017 ), p. 214-218 ISSN: 0040-6090 DOI: 10.1016/j.tsf.2017.09.046
Mousavi M. , Guenole J. , Baranova P. , Bitzek E. , Korsunsky AM. :Atomistic Simulation of Cracks versus Generalized Continua In: 14th International Conference on Fracture (ICF 14) 2017
Prakash A. , Bitzek E. :Idealized vs. Realistic Microstructures: An Atomistic Simulation Case Study on γ/γ′ Microstructures In: Materials 10 (2017 )ISSN: 1996-1944 DOI: 10.3390/ma10010088
Prakash A. , Weygand D. , Bitzek E. :Influence of grain boundary structure and topology on the plastic deformation of nanocrystalline aluminum as studied by atomistic simulations In: International Journal of Plasticity 97 (2017 ), p. 107-125 ISSN: 0749-6419 DOI: 10.1016/j.ijplas.2017.05.11
Preiß E. , Merle B. , Göken M. :Understanding the Extremely Low Fracture Toughness of Freestanding Gold Thin Films by In-situ Bulge Testing in an AFM In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 691 (2017 ), p. 218-225 ISSN: 0921-5093 DOI: 10.1016/j.msea.2017.03.037 URL: http://www.sciencedirect.com/science/article/pii/S0921509317303271
Rehman HU. , Burst K. , Neumeier S. , Sato A. , Reed R. , Göken M. :On the temperature dependent strengthening of nickel by transition metal solutes In: Acta Materialia 137 (2017 ), p. 54-63 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2017.05.038
Schwimmer D. , Stich A. , Höppel HW. :Possibilities for Improving the Heat Resistance of Cylinder Head Alloys based on AlSi7MgCu0.5 and AISi10MgCu0.5
Shrestha S. , Fischer R. , Matt G. , Feldner P. , Michel T. , Osvet A. , Levchuk I. , Merle B. , Golkar S. , Chen H. , Tedde SF. , Schmidt O. , Hock R. , Ruehrig M. , Göken M. , Heiß W. , Anton G. , Brabec C. :High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers In: Nature Photonics 11 (2017 ), p. 436-+ ISSN: 1749-4885 DOI: 10.1038/NPHOTON.2017.94
Vierneusel B. , Benker L. , Tremmel S. , Göken M. , Merle B. :Isolating the effect of residual stresses on coating wear by a mechanical stress relaxation technique In: Thin Solid Films 638 (2017 ), p. 159 - 166 ISSN: 0040-6090 DOI: 10.1016/j.tsf.2017.06.016 URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5a6af86239b18
Wang L. , Zenk C. , Stark A. , Felfer P. , Gabrisch H. , Göken M. , Lorenz U. , Pyczak F. :Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys In: Acta Materialia 137 (2017 ), p. 36-44 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2017.07.018
Xiao Y. , Wehrs J. , Ma H. , Al-Samman T. , Korte-Kerzel S. , Göken M. , Michler J. , Spolenak R. , Wheeler JM. :Investigation of the deformation behavior of aluminum micropillars produced by focused ion beam machining using Ga and Xe ions In: Scripta Materialia 127 (2017 ), p. 191-194 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2016.08.028
Zenk C. , Povstugar I. , Li R. , Rinaldi F. , Neumeier S. , Raabe D. , Göken M. :A novel type of Co-Ti-Cr-base γ/γ′ superalloys with low mass density In: Acta Materialia 135 (2017 ), p. 244-251 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2017.06.024
Zietara M. , Neumeier S. , Göken M. , Czyrska-Filemonowicz A. :Characterization of γ and γ′ Phases in 2nd and 4th Generation Single Crystal Nickel-Base Superalloys In: Metals and Materials International 23 (2017 ), p. 126-131 ISSN: 1598-9623 DOI: 10.1007/s12540-017-6109-y
2016
Altieri-Weimar P. , Yuan W. , Annibale ES. , Schoemaker S. , Amberger D. , Göken M. , Höppel HW. :Reliability model of LED package regarding the fatigue behavior of gold wires
Antolovich SD. , Mughrabi H. :In Memoriam Claude Bathias 1938–2015 In: International Journal of Fatigue 93 (2016 ), p. 215-215 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2016.03.007
Ast J. , Merle B. , Durst K. , Göken M. :Fracture toughness evaluation of NiAl single crystals by microcantilevers-a new continuous J-integral method In: Journal of Materials Research 31 (2016 ), p. 3786-3794 ISSN: 0884-2914 DOI: 10.1557/jmr.2016.393 URL: https://opus4.kobv.de/opus4-fau/files/8989/Ast_fracture_toughness.pdf
Bach J. , Möller J. , Göken M. , Bitzek E. , Höppel HW. :On the transition from plastic deformation to crack initiation in the high- and very high-cycle fatigue regimes in plain carbon steels In: International Journal of Fatigue (2016 )ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2016.04.003 URL: http://www.sciencedirect.com/science/article/pii/S0142112316300512
Bestmann M. , Pennacchioni G. , Mostefaoui S. , Göken M. , de Wall H. :Instantaneous healing of micro-fractures during coseismic slip: Evidence from microstructure and Ti in quartz geochemistry within an exhumed pseudotachylyte-bearing fault in tonalite In: Lithos 254 (2016 ), p. 84-93 ISSN: 0024-4937 DOI: 10.1016/j.lithos.2016.03.011
Blum W. , Eisenlohr P. , Hu J. :Interpretation of unloading tests on nanocrystalline Cu in terms of two mechanisms of deformation In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 665 (2016 ), p. 171-174 ISSN: 0921-5093 DOI: 10.1016/j.msea.2016.04.013
Brenne F. , Taube A. , Pröbstle M. , Neumeier S. , Schwarze D. , Schaper M. , Niendorf T. :Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting In: Progress in Additive Manufacturing 1 (2016 ), p. 141 - 151 ISSN: 2363-9512 DOI: 10.1007/s40964-016-0013-8
Cairney J. , Eder K. , Felfer P. , Masters A. :Contributions to understanding catalysis by using atom probe tomography
Cartón-Cordero M. , Campos M. , Freund L. , Kolb M. , Neumeier S. , Göken M. , Torralba JM. :Mechanical behaviour of novel sintered Co-Al-W alloys at high temperatures World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016 URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85035325510∨igin=inward
Eder K. , Felfer P. , Ferry M. , Xia K. , Cairney JM. :Grain size stability in Al-Sc alloys processed by severe plastic deformation In: Scripta Materialia 123 (2016 ), p. 105-108 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2016.06.005
Favier V. , Blanche A. , Wang C. , Ngoc Lam Phung . , Ranc N. , Wagner D. , Bathias C. , Chrysochoos A. , Mughrabi H. :Very high cycle fatigue for single phase ductile materials: Comparison between α-iron, copper and α-brass polycrystals In: International Journal of Fatigue 93 (2016 ), p. 326-338 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2016.05.034
Felfer P. , Cairney J. :A computational geometry framework for the optimisation of atom probe reconstructions In: Ultramicroscopy 169 (2016 ), p. 62-68 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2016.07.008
Felfer P. , Mccarroll I. , Macauley C. , Cairney JM. :A simple approach to atom probe sample preparation by using shadow masks In: Ultramicroscopy 160 (2016 ), p. 163-167 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2015.09.005
Guenole J. , Prakash A. , Bitzek E. :Influence of intrinsic strain on irradiation induced damage: the role of threshold displacement and surface binding energies In: Materials and Design 111 (2016 ), p. 405-413 ISSN: 0261-3069 DOI: 10.1016/j.matdes.2016.08.077
Hammerschmidt T. , Koßmann J. , Zenk C. , Neumeier S. , Göken M. , Lopez-Galilea I. , Mujica Roncery L. , Huth S. , Kostka A. , Theisen W. , Drautz R. :The role of local chemical composition for TCP phase precipitation in Ni-base and Co-base superalloys 13th International Symposium on Superalloys, SUPERALLOYS 2016 DOI: 10.1002/9781119075646.ch10
He MR. , Samudrala SK. , Kim G. , Felfer P. , Breen AJ. , Cairney JM. , Gianola DS. :Linking stress-driven microstructural evolution in nanocrystalline aluminium with grain boundary doping of oxygen In: Nature Communications 7 (2016 ), Article No.: 11225 ISSN: 2041-1723 DOI: 10.1038/ncomms11225
Huenert D. , Pröbstle M. , Casanova A. , Schlütter R. , Krakow R. , Büscher M. , Randelzhofer P. , Evans A. , Löhnert K. , Witulski T. , Neumeier S. , Rae CMF. :ATI718PLUS® - New nickel based disc alloy and its capability 13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs , 11. September 2016 - 15. September 2016 )In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (ed.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016 DOI: 10.1002/9781119075646.ch84
Javed H. , Merle B. , Preiß E. , Hivet R. , Benedetto A. , Göken M. :Mechanical characterization of metallic thin films by bulge and scratch testing In: Surface & Coatings Technology 289 (2016 ), p. 69-74 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2016.01.051
Kaub TM. , Felfer P. , Cairney JM. , Thompson GB. :Influence of Ni Solute segregation on the intrinsic growth stresses in Cu(Ni) thin films In: Scripta Materialia 113 (2016 ), p. 131-134 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2015.10.010
Kolb M. , Wheeler JM. , Mathur HN. , Neumeier S. , Korte-Kerzel S. , Pyczak F. , Michler J. , Göken M. :Local mechanical properties of the (β0+ω0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperatures In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 665 (2016 ), p. 135-140 ISSN: 0921-5093 DOI: 10.1016/j.msea.2016.04.026
Korsunsky A. , Guenole J. , Salvati E. , Sui T. , Mousavi M. , Prakash A. , Bitzek E. :Quantifying eigenstrain distributions induced by focused ion beam damage in silicon In: Materials Letters 185 (2016 ), p. 47-49 ISSN: 0167-577X DOI: 10.1016/j.matlet.2016.08.111
Krottenthaler M. , Benker L. , Mughal MZ. , Sebastiani M. , Durst K. , Göken M. :Effect of elastic anisotropy on strain relief and residual stress determination in cubic systems by FIB-DIC experiments In: Materials & Design 112 (2016 ), p. 505-511 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2016.09.046
Kümmel F. , Hausöl T. , Höppel HW. , Göken M. :Enhanced fatigue lives in AA1050A/AA5005 laminated metal composites produced by accumulative roll bonding In: Acta Materialia 120 (2016 ), p. 150-158 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2016.08.039
Kümmel F. , Kreuz M. , Hausöl T. , Höppel HW. , Göken M. :Microstructure and Mechanical Properties of Accumulative Roll-Bonded AA1050A/AA5005 Laminated Metal Composites In: Metals 6 (2016 )ISSN: 2075-4701 DOI: 10.3390/met6030056
Liebig JP. , Göken M. , Richter G. , Mackovic M. , Przybilla T. , Spiecker E. , Pierron ON. , Merle B. :A flexible method for the preparation of thin film samples for in situ TEM characterization combining shadow-FIB milling and electron beam-assisted etching In: Ultramicroscopy 171 (2016 ), p. 82-88 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2016.09.004
Luo J. , Wang J. , Bitzek E. , Huang JY. , Zheng H. , Tong L. , Yang Q. , Li J. , Mao SX. :Size-Dependent Brittle-to-Ductile Transition in Silica Glass Nanofibers In: Nano Letters 16 (2016 ), p. 105-113 ISSN: 1530-6984 DOI: 10.1021/acs.nanolett.5b03070
Ma X. , Huang C. , Moering J. , Ruppert M. , Höppel HW. , Göken M. , Narayan J. , Zhu Y. :Mechanical properties of copper/bronze laminates: Role of interfaces In: Acta Materialia 116 (2016 ), p. 43-52 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2016.06.023
Mackovic M. , Niekiel F. , Wondraczek L. , Bitzek E. , Spiecker E. :In situ mechanical quenching of nanoscale silica spheres in the transmission electron microscope In: Scripta Materialia 121 (2016 ), p. 70-74 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2016.04.019 URL: http://www.sciencedirect.com/science/article/pii/S1359646216301397
Merle B. , Nicholson KS. , Herbert EG. , Göken M. :An improved method for point deflection measurements on rectangular membranes In: Materials & Design 109 (2016 ), p. 485-491 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2016.07.054
Morgenstern M. , Freitag N. , Vaid A. , Pratzer M. , Liebmann M. :Graphene quantum dots: wave function mapping by scanning tunneling spectroscopy and transport spectroscopy of quantum dots prepared by local anodic oxidation In: Physica Status Solidi-Rapid Research Letters 10 (2016 ), p. 24-38 ISSN: 1862-6254 DOI: 10.1002/pssr.201510164
Mughrabi H. :The a-factor in the Taylor flow-stress law in monotonic, cyclic and quasi stationary deformations: Dependence on slip mode, dislocation arrangement and density In: Current Opinion in Solid State & Materials Science (2016 )ISSN: 1359-0286 DOI: 10.1016/j.cossms.2016.07.001
Mughrabi H. :The α-factor in the Taylor flow-stress law in monotonic, cyclic and quasi-stationary deformations: Dependence on slip mode, dislocation arrangement and density In: Current Opinion in Solid State & Materials Science 20 (2016 ), p. 411-420 ISSN: 1359-0286 DOI: 10.1016/j.cossms.2016.07.001
Favier V, Blanche A, Wang C, Phung NL, Ranc N, Wagner D, Bathias C, Chrysochoos A, Mughrabi H:Very high cycle fatigue for single phase ductile materials: Comparison between alpha-iron, copper and alpha-brass polycrystals In: International Journal of Fatigue 93 (2016 ), p. 326-338 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2016.05.034
Mughrabi H. , Antolovich SD. :A tribute to Claude Bathias – Highlights of his pioneering work in Gigacycle Fatigue In: International Journal of Fatigue 93 (2016 ), p. 217-223 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2016.04.020
Möller J. , Bitzek E. :BDA: A novel method for identifying defects in body-centered cubic crystals In: MethodsX 3 (2016 ), p. 279-288 ISSN: 2215-0161 DOI: 10.1016/j.mex.2016.03.013 URL: http://www.sciencedirect.com/science/article/pii/S2215016116300036
Möller J. , Prakash A. , Bitzek E. :Multiscale Materials Modeling: Approaches to Full Multiscaling De Gruyter, Berlin , 2016
Neumeier S. , Rehman HU. , Neuner J. , Zenk C. , Michel S. , Schuwalow S. , Rogal J. , Drautz R. , Göken M. :Diffusion of solutes in fcc Cobalt investigated by diffusion couples and first principles kinetic Monte Carlo In: Acta Materialia 106 (2016 ), p. 304-312 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2016.01.028
Nguyen H. , Boehm W. , Tsoupis I. , Göken M. , Höppel HW. , Schmidt C. , Hausöl T. , Ruppert M. , Merklein M. :Tailored heat treated accumulative roll bonded aluminum blanks: failure under bending stresses In: Production Engineering 10 (2016 ), p. 399-407 ISSN: 0944-6524 DOI: 10.1007/s11740-016-0685-4
Nöhring WG. , Möller J. , Xie Z. , Bitzek E. :Wedge-shaped twins and pseudoelasticity in fcc metallic nanowires under bending In: Extreme Mechanics Letters 8 (2016 )ISSN: 2352-4316 DOI: 10.1016/j.eml.2016.03.001
Povstugar I. , Zenk C. , Li R. , Choi P-. , Neumeier S. , Dolotko O. , Hoelzel M. , Göken M. , Raabe D. :Elemental partitioning, lattice misfit and creep behaviour of Cr containing γ′ strengthened Co base superalloys In: Materials Science and Technology 32 (2016 ), p. 220-225 ISSN: 0267-0836 DOI: 10.1179/1743284715Y.0000000112
Prakash A. , Hummel M. , Schmauder S. , Bitzek E. :Nanosculpt: A methodology for generating complex realistic configurations for atomistic simulations In: MethodsX 3 (2016 ), p. 219-230 ISSN: 2215-0161 DOI: 10.1016/j.mex.2016.03.002 URL: http://www.sciencedirect.com/science/article/pii/S2215016116000157
Pröbstle M. , Neumeier S. , Feldner P. , Rettig R. , Helmer H. , Singer R. , Göken M. :Improved creep strength of nickel-base superalloys by optimized γ/γ′ partitioning behavior of solid solution strengthening elements In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 (2016 ), p. 411-420 ISSN: 0921-5093 DOI: 10.1016/j.msea.2016.08.121
Pröbstle M. , Neumeier S. , Hopfenmüller J. , Freund L. , Niendorf T. , Schwarze D. , Göken M. :Superior creep strength of a nickel-based super alloy produced by selective laser melting In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 674 (2016 ), p. 299-307 ISSN: 0921-5093 DOI: 10.1016/j.msea.2016.07.061
Ruppert M. , Schunk C. , Hausmann D. , Höppel HW. , Göken M. :Global and local strain rate sensitivity of bimodal Al-laminates produced by accumulative roll bonding In: Acta Materialia 103 (2016 ), p. 643-650 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2015.11.009
Vaid A. , Mittal K. , Sahu S. , Shekhar S. :Controlled Evolution of Coincidence Site Lattice Related Grain Boundaries In: Transactions of the Indian Institute of Metals 69 (2016 ), p. 1745-1753 ISSN: 0975-1645 DOI: 10.1007/s12666-016-0834-7
Zenk C. , Bauer A. , Goik P. , Neumeier S. , Stone HJ. , Göken M. :Microstructure, Lattice Misfit, and High-Temperature Strength of γ′-Strengthened Co-Al-W-Ge Model Superalloys In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 (2016 ), p. 2141-2149 ISSN: 1073-5623 DOI: 10.1007/s11661-016-3408-8
Zenk C. , Neumeier S. , Engl N. , Fries SG. , Dolotko O. , Weiser M. , Virtanen S. , Göken M. :Intermediate Co/Ni-base model superalloys - Thermophysical properties, creep and oxidation In: Scripta Materialia 112 (2016 ), p. 83-86 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2015.09.018
Zenk C. , Neumeier S. , Kolb M. , Volz N. , Fries SG. , Dolotko O. , Povstugar I. , Raabe D. , Göken M. :The role of the base element in γ′ strengthened cobalt/nickel-base superalloys 13th International Symposium on Superalloys, SUPERALLOYS 2016 DOI: 10.1002/9781119075646.ch103
2015
Amberger D. , Blickle T. , Höppel HW. , Göken M. :Fatigue behavior of calcium containing AZ91 magnesium alloys In: MP Materials Testing 57 (2015 ), p. 126-130 ISSN: 0025-5300 DOI: 10.3139/120.110694
Bauer A. , Neumeier S. , Pyczak F. , Göken M. :Influence of iridium on the properties of γ′-strengthened co-base superalloys In: Advanced Engineering Materials 17 (2015 ), p. 748-754 ISSN: 1438-1656 DOI: 10.1002/adem.201400266
Bei GP. , Pedimonte BJ. , Pezoldt M. , Ast J. , Fey T. , Göken M. , Greil P. :Crack Healing in Ti2Al0.5Sn0.5C-Al2O3 Composites In: Journal of the American Ceramic Society 98 (2015 ), p. 1604-1610 ISSN: 0002-7820 DOI: 10.1111/jace.13496
Bhowmik A. , Neumeier S. , Rhode S. , Stone HJ. :Allotropic transformation induced stacking faults and discontinuous coarsening in a γ-γ′ Co-base alloy In: Intermetallics 59 (2015 ), p. 95-101 ISSN: 0966-9795 DOI: 10.1016/j.intermet.2014.12.013
Bitzek E. , Kermode JR. , Gumbsch P. :Atomistic aspects of fracture In: International Journal of Fatigue 191 (2015 ), p. 13-30 ISSN: 0142-1123 DOI: 10.1007/s10704-015-9988-2
Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklenicka V. :Correct Interpretation of Creep Rates: A Case Study of Cu In: Journal of Materials Science & Technology 31 (2015 ), p. 1065-1068 ISSN: 1005-0302 DOI: 10.1016/j.jmst.2015.09.012
Blum W. , Dvorak J. , Kral P. , Petrenec M. , Eisenlohr P. , Sklenicka V. :In situ study of microstructure and strength of severely predeformed pure Cu in deformation at 573K In: Philosophical Magazine 95 (2015 ), p. 3696-3711 ISSN: 1478-6435 DOI: 10.1080/14786435.2015.1096025
Blum W. , Eisenlohr P. , Prell M. , Durst K. :Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests In: Kovove Materialy-Metallic Materials 53 (2015 ), p. 199-205 ISSN: 0023-432X DOI: 10.4149/km-2015-4-199
Blum W. , Eisenlohr P. , Prell M. , Durst K. :Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests In: Kovove Materialy-Metallic Materials 53 (2015 ), p. 199-205 ISSN: 0023-432X DOI: 10.4149/km_2015_4_199
Cairney JM. , Rajan K. , Haley D. , Gault B. , Bagot PJ. , Choi PP. , Felfer P. , Ringer SP. , Marceau RKW. , Moody MP. :Mining information from atom probe data In: Ultramicroscopy 159 (2015 ), p. 324-337 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2015.05.006
Choi IC. , Lee DH. , Ahn B. , Durst K. , Kawasaki M. , Langdon TG. , Jang JI. :Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion In: Scripta Materialia 94 (2015 ), p. 44-47 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2014.09.014
Felfer P. , Ceguerra AV. , Ringer SP. , Cairney JM. :Detecting and extracting clusters in atom probe data: A simple, automated method using Voronoi cells In: Ultramicroscopy 150 (2015 ), p. 30-36 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2014.11.015
Felfer P. , Li T. , Eder K. , Galinski H. , Magyar AP. , Bell DC. , Smith GDW. , Kruse N. , Ringer SP. , Cairney JM. :New approaches to nanoparticle sample fabrication for atom probe tomography DOI: 10.1016/j.ultramic.2015.04.014
Felfer P. , Scherrer B. , Demeulemeester J. , Vandervorst W. , Cairney JM. :Mapping interfacial excess in atom probe data DOI: 10.1016/j.ultramic.2015.06.002
Freund L. , Bauer A. , Benker L. , Neumeier S. , Göken M. :Formation of Cuboidal Co3AlC Precipitates in Carbon-Containing Co-Al-W-Based Superalloys In: Advanced Engineering Materials 17 (2015 ), p. 1113-1118 ISSN: 1438-1656 DOI: 10.1002/adem.201500171
Göken M. , Glatzel U. :DFG Research Training Group 1229 "Stable and Metastable Multi-Phase Systems for Elevated Service Temperatures" In: Advanced Engineering Materials 17 (2015 ), p. 1096-1098 ISSN: 1438-1656 DOI: 10.1002/adem.201500330
Heinzerling P. , Dräger G. , Kometz A. , Preiß E. :Funktionelle Beschichtungen in der Nanotechnologie - Ein Kooperationsprojekt Schule-Hochschule. In: Praxis der Naturwissenschaften - Chemie in der Schule 64 (2015 ), p. 42-46 ISSN: 1617-5638
Höppel HW. :Ultrafine-Grained Metals In: Metals 5 (2015 ), p. 2393-2396 ISSN: 2075-4701
Klausmann A. , Morita K. , Johanns KE. , Fasel C. , Durst K. , Mera G. , Riedel R. , Ionescu E. :Synthesis and high-temperature evolution of polysilylcarbodiimide-derived SiCN ceramic coatings In: Journal of the European Ceramic Society 35 (2015 ), p. 3771-3780 ISSN: 0955-2219 DOI: 10.1016/j.jeurceramsoc.2015.07.013
Klöffel T. , Bitzek E. , Meyer B. :Impact of twin boundaries on bulk elastic constants: Density-functional theory data for Young's modulus of Ag In: Data in Brief 3 (2015 ), p. 209-215 ISSN: 2352-3409 DOI: 10.1016/j.dib.2015.03.005
Kobler A. , Beuth T. , Klöffel T. , Prang R. , Moosmann M. , Seherer T. , Walheim S. , Hahn H. , Kuebel C. , Meyer B. , Schimmel T. , Bitzek E. :Nanotwinned silver nanowires: Structure and mechanical properties In: Acta Materialia 92 (2015 ), p. 299-308 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2015.02.041
Kossmann J. , Zenk C. , Lopez-Galilea I. , Neumeier S. , Kostka A. , Huth S. , Theisen W. , Göken M. , Drautz R. , Hammerschmidt T. :Microsegregation and precipitates of an as-cast Co-based superalloy-microstructural characterization and phase stability modelling In: Journal of Materials Science 50 (2015 ), p. 6329-6338 ISSN: 0022-2461 DOI: 10.1007/s10853-015-9177-8
La Fontaine A. , Yen HW. , Felfer P. , Ringer SP. , Cairney JM. :Atom probe study of chromium oxide spinels formed during intergranular corrosion In: Scripta Materialia 99 (2015 ), p. 1-4 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2014.09.028
Li D. , Kunz T. , Wolf N. , Liebig JP. , Wittmann S. , Ahmad T. , Hessmann MT. , Auer R. , Göken M. , Brabec C. :Silicon nitride and intrinsic amorphous silicon double antireflection coatings for thin-film solar cells on foreign substrates In: Thin Solid Films 583 (2015 ), p. 25-33 ISSN: 0040-6090 DOI: 10.1016/j.tsf.2015.03.051
Lopez-Galilea I. , Zenk C. , Neumeier S. , Huth S. , Theisen W. , Göken M. :The thermal stability of intermetallic compounds in an as-cast SX co-base superalloy In: Advanced Engineering Materials 17 (2015 ), p. 741-747 ISSN: 1438-1656 DOI: 10.1002/adem.201400249
Maier V. , Schunk C. , Göken M. , Durst K. :Microstructure-dependent deformation behaviour of bcc-metals - indentation size effect and strain rate sensitivity In: Philosophical Magazine 95 (2015 ), p. 1766-1779 ISSN: 1478-6435 DOI: 10.1080/14786435.2014.982741
Malchow P. , Johanns KE. , Moencke D. , Korte-Kerzel S. , Wondraczek L. , Durst K. :Composition and cooling-rate dependence of plastic deformation, densification, and cracking in sodium borosilicate glasses during pyramidal indentation In: Journal of Non-Crystalline Solids 419 (2015 ), p. 97-109 ISSN: 0022-3093 DOI: 10.1016/j.jnoncrysol.2015.03.020
Merle B. , Cassel D. , Göken M. :Time-dependent deformation behavior of freestanding and SiNx-supported gold thin films investigated by bulge tests In: Journal of Materials Research 30 (2015 ), p. 2161-2169 ISSN: 0884-2914 DOI: 10.1557/jmr.2015.184 URL: https://opus4.kobv.de/opus4-fau/files/7997/Merle_time-dependent.pdf
Mughrabi H. :Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth In: Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences 373 (2015 )ISSN: 1364-503X DOI: 10.1098/rsta.2014.0132
Möller J. , Bitzek E. :On the influence of crack front curvature on the fracture behavior of nanoscale cracks In: Engineering Fracture Mechanics 150 (2015 ), p. 197-208 ISSN: 0013-7944 DOI: 10.1016/j.engfracmech.2015.03.028
Neumeier S. , Freund L. , Göken M. :Novel wrought γ/γ′ cobalt base superalloys with high strength and improved oxidation resistance In: Scripta Materialia 109 (2015 ), p. 104-107 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2015.07.030
Niekiel F. , Spiecker E. , Bitzek E. :Influence of anisotropic elasticity on the mechanical properties of fivefold twinned nanowires In: Journal of the Mechanics and Physics of Solids 84 (2015 ), p. 358-379 ISSN: 0022-5096 DOI: 10.1016/j.jmps.2015.08.004
Prakash A. , Guenole J. , Wang J. , Müller J. , Spiecker E. , Mills MJ. , Povstugar I. , Choi P. , Raabe D. , Bitzek E. :Atom probe informed simulations of dislocation-precipitate interactions reveal the importance of local interface curvature In: Acta Materialia 92 (2015 ), p. 33-45 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2015.03.050
Prakash A. , Nöhring WG. , Lebensohn RA. , Höppel HW. , Bitzek E. :A multiscale simulation framework of the accumulative roll bonding process accounting for texture evolution In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 631 (2015 ), p. 104-119 ISSN: 0921-5093 DOI: 10.1016/j.msea.2015.02.005
Pyczak F. , Bauer A. , Göken M. , Lorenz U. , Neumeier S. , Oehring M. , Paul J. , Schell N. , Schreyer A. , Stark A. , Symanzik F. :The effect of tungsten content on the properties of L12-hardened Co-Al-W alloys In: Journal of Alloys and Compounds 632 (2015 ), p. 110-115 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2015.01.031
Rehman HU. , Durst K. , Neumeier S. , Parsa AB. , Kostka A. , Eggeler G. , Göken M. :Nanoindentation studies of the mechanical properties of the mu phase in a creep deformed Re containing nickel-based superalloy In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 634 (2015 ), p. 202-208 ISSN: 0921-5093 DOI: 10.1016/j.msea.2015.03.045
Rettig R. , Ritter N. , Helmer H. , Neumeier S. , Singer R. :Single-crystal nickel-based superalloys developed by numerical multi-criteria optimization techniques: Design based on thermodynamic calculations and experimental validation In: Modelling and Simulation in Materials Science and Engineering 23 (2015 ), Article No.: 035004 ISSN: 1361-651X DOI: 10.1088/0965-0393/23/3/035004
Ruppert M. , Freund L. , Wenzl T. , Höppel HW. , Göken M. :Ultrafine-grained austenitic stainless steels X4CrNi18-12 and X8CrMnNi19-6-3 produced by accumulative roll bonding In: Metals 5 (2015 ), p. 730-742 ISSN: 2075-4701 DOI: 10.3390/met5020730
Ruppert M. , Strebl M. , Höppel HW. , Göken M. :Mechanical properties of ultrafine-grained AlZnMg(Cu)-alloys AA7020 and AA7075 processed by accumulative roll bonding In: Journal of Materials Science 50 (2015 ), p. 4422-4429 ISSN: 0022-2461 DOI: 10.1007/s10853-015-9008-y
Scherrer B. , Doebeli M. , Felfer P. , Spolenak R. , Cairney J. , Galinski H. :The Hidden Pathways in Dense Energy Materials - Oxygen at Defects in Nanocrystalline Metals In: Advanced Materials 27 (2015 ), p. 6220-6224 ISSN: 0935-9648 DOI: 10.1002/adma.201503118
Schweiger M. , Schaudig M. , Gannott F. , Killian M. , Bitzek E. , Schmuki P. , Zaumseil J. :Controlling the diameter of aligned single-walled carbon nanotubes on quartz via catalyst reduction time In: Carbon 95 (2015 ), p. 452-459 ISSN: 0008-6223 DOI: 10.1016/j.carbon.2015.08.058
Sun Z. , Van Petegem S. , Cervellino A. , Durst K. , Blum W. , Van Swygenhoven H. :Dynamic recovery in nanocrystalline Ni In: Acta Materialia 91 (2015 ), p. 91-100 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2015.03.033
Terberger PJ. , Sebold D. , Webler R. , Ziener M. , Neumeier S. , Klein L. , Virtanen S. , Göken M. , Vassen R. :Isothermal aging of a γ′-strengthened Co-Al-W alloy coated with vacuum plasma-sprayed MCrAlY bond coats In: Surface & Coatings Technology 276 (2015 ), p. 360-367 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2015.06.048
Webler R. , Ziener M. , Neumeier S. , Terberger PJ. , Vassen R. , Göken M. :Evolution of microstructure and mechanical properties of coated Co-base superalloys during heat treatment and thermal exposure In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 628 (2015 ), p. 374-381 ISSN: 0921-5093 DOI: 10.1016/j.msea.2015.01.060
2014
Amodeo J. , Begau C. , Bitzek E. :Atomistic Simulations of Compression Tests on Ni3Al Nanocubes In: Materials Research Letters 2 (2014 ), p. 140-145 ISSN: 2166-3831 DOI: 10.1080/21663831.2013.878884
Ast J. , Przybilla T. , Maier V. , Durst K. , Göken M. :Microcantilever bending experiments in NiAl - Evaluation, size effects, and crack tip plasticity In: Journal of Materials Research 29 (2014 ), p. 2129-2140 ISSN: 0884-2914 DOI: 10.1557/jmr.2014.240
Bach J. , Höppel HW. , Prell M. , Göken M. :Crack initiation mechanisms in AA6082 fatigued in the VHCF-regime In: International Journal of Fatigue 60 (2014 ), p. 23-27 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2013.08.018
Bhowmik A. , Neumeier S. , Barnard JS. , Zenk C. , Göken M. , Rae CMF. , Stone HJ. :Microstructure and mechanical properties of Cr-Ta-Si Laves phase-based alloys at elevated temperatures In: Philosophical Magazine 94 (2014 ), p. 3914-3944 ISSN: 1478-6443 DOI: 10.1080/14786435.2014.971086
Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklenicka V. :Effect of grain refinement by ECAP on creep of pure Cu In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 590 (2014 ), p. 423-432 ISSN: 0921-5093 DOI: 10.1016/j.msea.2013.10.022
Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklenicka V. :What is "stationary" deformation of pure Cu? In: Journal of Materials Science 49 (2014 ), p. 2987-2997 ISSN: 0022-2461 DOI: 10.1007/s10853-013-7983-4
Bösch D. , Pogatscher S. , Hummel M. , Fragner W. , Uggowitzer PJ. , Göken M. , Höppel HW. :Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 46 (2014 ), p. 1035-1045 ISSN: 1073-5623 DOI: 10.1007/s11661-014-2700-8
Durst K. , Maier V. :Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals In: Current Opinion in Solid State & Materials Science (2014 )ISSN: 1359-0286 DOI: 10.1016/j.cossms.2015.02.001
Felfer P. , Benndorf P. , Masters A. , Maschmeyer T. , Cairney JM. :Revealing the Distribution of the Atoms within Individual Bimetallic Catalyst Nanoparticles In: Angewandte Chemie International Edition 53 (2014 ), p. 11190-11193 ISSN: 1433-7851 DOI: 10.1002/anie.201405043
Fragner W. , Baumgartner K. , Suppan H. , Hummel M. , Bösch D. , Höppel HW. , Uggowitzer PJ. :Using scrap in recycling alloys for structural applications in the automotive industry Light Metals 2014 - TMS 2014 Annual Meeting and Exhibition (San Diego, CA ) URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84899827386∨igin=inward
Fried M. , Krechel C. , Affeldt EE. , Eckert B. , Kimmig S. , Retze U. , Höppel HW. , Göken M. :Fatigue crack initiation in nickel-based superalloys studied by microstructure-based FE modeling and scanning electron microscopy In: MATEC Web of Conferences 14 (2014 )ISSN: 2261-236X DOI: 10.1051/matecconf/20141416001
Guo W. , Jaegle E. , Yao J. , Maier V. , Korte S. , Schneider JM. , Raabe D. :Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates In: Acta Materialia 80 (2014 ), p. 94-106 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2014.07.027
Haag F. , Beitelschmidt D. , Eckert J. , Durst K. :Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending - A nanoindentation and atomic force microscopy study In: Acta Materialia 70 (2014 ), p. 188-197 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2014.01.053
He MR. , Felfer P. , Dasgupta S. , Samudrala SK. , Malone PJ. , Feng G. , Hemker KJ. , Cairney JM. , Gianola DS. :Understanding the mechanical behavior of nanocrystalline Al-O thin films with complex microstructures In: Acta Materialia 77 (2014 ), p. 269-283 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2014.05.058
He WJ. , Zhang SH. , Prakash A. , Helm D. :A hierarchical multi-scale model for hexagonal materials taking into account texture evolution during forming simulation In: Computational Materials Science 82 (2014 ), p. 464-475 ISSN: 0927-0256 DOI: 10.1016/j.commatsci.2013.10.023
Lapovok R. , Qi Y. , Ng HP. , Maier V. , Estrin Y. :Multicomponent materials from machining chips compacted by equal-channel angular pressing In: Journal of Materials Science 49 (2014 ), p. 1193-1204 ISSN: 0022-2461 DOI: 10.1007/s10853-013-7801-z
Lee S. , Im J. , Yoo Y. , Bitzek E. , Kiener D. , Richter G. , Kim B. , Oh SH. :Reversible cyclic deformation mechanism of gold nanowires by twinning-detwinning transition evidenced from in situ TEM In: Nature Communications 5 (2014 ), Article No.: 3033 ISSN: 2041-1723 DOI: 10.1038/ncomms4033
Magagnosc DJ. , Kumar G. , Schroers J. , Felfer P. , Cairney JM. , Gianola DS. :Effect of ion irradiation on tensile ductility, strength and fictive temperature in metallic glass nanowires In: Acta Materialia 74 (2014 ), p. 165-182 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2014.04.002
Marr T. , Freudenberger J. , Maier V. , Höppel HW. , Göken M. , Schultz L. :The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire In: Metals 4 (2014 ), p. 37-54 ISSN: 2075-4701 DOI: 10.3390/met4010037
Merle B. , Göken M. :Bulge fatigue testing of freestanding and supported gold films In: Journal of Materials Research 29 (2014 ), p. 267-276 ISSN: 0884-2914 DOI: 10.1557/jmr.2013.373 URL: https://opus4.kobv.de/opus4-fau/files/6426/merle_bulge.pdf
Merle B. , Maier V. , Durst K. :Experimental and theoretical confirmation of the scaling exponent 2 in pyramidal load displacement data for depth sensing indentation In: Scanning 36 (2014 ), p. 526-529 ISSN: 0161-0457 DOI: 10.1002/sca.21151
Mughrabi H. :Comment on 'Constant intermittent flow of dislocations: Central problems in plasticity' by L. M. Brown In: Journal of Materials Science & Technology 30 (2014 ), p. 123-126 ISSN: 1005-0302 DOI: 10.1179/1743284713Y.0000000224
Mughrabi H. :The importance of sign and magnitude of γ/γ′ lattice misfit in superalloys - With special reference to the new γ′-hardened cobalt-base superalloys In: Acta Materialia 81 (2014 ), p. 21-29 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2014.08.005
Möller J. , Bitzek E. :Comparative study of embedded atom potentials for atomistic simulations of fracture in α-iron In: Modelling and Simulation in Materials Science and Engineering 22 (2014 ), Article No.: 045002 ISSN: 0965-0393 DOI: 10.1088/0965-0393/22/4/045002
Möller J. , Bitzek E. :Fracture toughness and bond trapping of grain boundary cracks In: Acta Materialia 73 (2014 ), p. 1-11 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2014.03.035
Neumeier S. , Pröbstle M. , Huenert D. , Göken M. :Tensile and creep strength of thermally exposed allvac 718Plus 8th International Symposium on Superalloy 718 and Derivatives 2014 In: Proceedings of 8th International Symposium on Superalloy 718 and Derivatives 2014 2014 URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84923090036∨igin=inward
Niekiel F. , Bitzek E. , Spiecker E. :Combining atomistic simulation and x-ray diffraction for the characterization of nanostructures: A case study on fivefold twinned nanowires In: Acs Nano 8 (2014 ), p. 1629-1638 ISSN: 1936-0851 DOI: 10.1021/nn405941m
Phung NL. , Favier V. , Ranc N. , Vales F. , Mughrabi H. :Very high cycle fatigue of copper: Evolution, morphology and locations of surface slip markings In: International Journal of Fatigue 63 (2014 ), p. 68-77 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2014.01.007
Povstugar I. , Choi PP. , Neumeier S. , Bauer A. , Zenk C. , Göken M. , Raabe D. :Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation In: Acta Materialia 78 (2014 ), p. 78-85 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2014.06.020
Ruppert M. , Höppel HW. , Göken M. :Influence of cross-rolling on the mechanical properties of an accumulative roll bonded aluminum alloy AA6014 In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 597 (2014 ), p. 122-127 ISSN: 0921-5093 DOI: 10.1016/j.msea.2013.12.075
Schmid C. , Hetzner H. , Tremmel S. , Hilpert F. , Durst K. :Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings In: Advanced Materials Research 996 (2014 ), p. 14–21 ISSN: 1022-6680 DOI: 10.4028/www.scientific.net/AMR.996.14 URL: https://www.mfk.uni-erlangen.de?file=pubmfk_5637d06159362
Umeno Y. , Nöhring WG. , Iskandarov A. , Bitzek E. :Atomistic model analysis of local and global instabilities in crystals at finite temperature In: Key Engineering Materials 592-593 (2014 ), p. 39-42 ISSN: 1013-9826 DOI: 10.4028/www.scientific.net/KEM.592-593.39
Webler R. , Neumeier S. , Göken M. :Characterization of oxidation protection coatings for high temperature applications by means of nanoindentation and scanning electron microscopy methods In: Praktische Metallographie 51 (2014 ), p. 568-582 ISSN: 0032-678X DOI: 10.3139/147.110310
Young DJ. , Thuan Dinh Nguyen . , Felfer P. , Zhang J. , Cairney JM. :Penetration of protective chromia scales by carbon In: Scripta Materialia 77 (2014 ), p. 29-32 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2014.01.009
Zenk C. , Neumeier S. , Stone HJ. , Göken M. :Mechanical properties and lattice misfit of γ/γ' strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system In: Intermetallics 55 (2014 ), p. 28-39 ISSN: 0966-9795 DOI: 10.1016/j.intermet.2014.07.006
2013
Ahmed F. , Krottenthaler M. , Schmid C. , Durst K. :Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy In: Surface & Coatings Technology 237 (2013 ), p. 255-260 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2013.07.025
Amberger D. , Blickle T. , Höppel HW. , Göken M. :Fatigue Behavior of Calcium Containing AZ91 Magnesium Alloys In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013 DOI: 10.3139/120.110694
Ast J. , Durst K. :Nanoforming behaviour and microstructural evolution during nanoimprinting of ultrafine-grained and nanocrystalline metals In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 568 (2013 ), p. 68-75 ISSN: 0921-5093 DOI: 10.1016/j.msea.2012.11.056
Bach J. , Göken M. , Bitzek E. , Höppel HW. :Influence of specimen geometry on temperature increase during ultrasonic fatigue testing In: Ultrasonics 53 (2013 ), p. 1412-1416 ISSN: 1874-9968 DOI: 10.1016/j.ultras.2013.04.021
Bach J. , Höppel HW. , Bitzek E. , Göken M. :Influence of specimen geometry on temperature increase during ultrasonic fatigue testing In: Ultrasonics 53 (2013 ), p. 1412-1416 ISSN: 0041-624X DOI: 10.1016/j.ultras.2013.04.021
Bach J. , Höppel HW. , Bitzek E. , Göken M. :Influence of specimen geometry on temperature increase during ultrasonic fatigue testing In: Ultrasonics 53 (2013 ), p. 1412-1416 ISSN: 0041-624X DOI: 10.1016/j.ultras.2013.04.021
Bach J. , Liebig JP. , Höppel HW. , Blum W. :Influence of grain boundaries on the deformation resistance: Insights from an investigation of deformation kinetics and microstructure of copper after predeformation by ECAP In: Philosophical Magazine 93 (2013 ), p. 4331-4354 ISSN: 0031-8086 DOI: 10.1080/14786435.2013.828161
Bitzek E. , Gumbsch P. :Mechanisms of dislocation multiplication at crack tips In: Acta Materialia 61 (2013 ), p. 1394-1403 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2012.11.016
Ceguerra AV. , Breen AJ. , Stephenson LT. , Felfer P. , Araullo-Peters VJ. , Liddicoat PV. , Cui X. , Yao L. , Haley D. , Moody MP. , Gault B. , Cairney JM. , Ringer SP. :The rise of computational techniques in atom probe microscopy In: Current Opinion in Solid State & Materials Science 17 (2013 ), p. 224-235 ISSN: 1359-0286 DOI: 10.1016/j.cossms.2013.09.006
Chekhonin P. , Scharnweber J. , Scharnweber M. , Oertel C-. , Hausöl T. , Höppel HW. , Jaschinski J. , Marr T. , Skrotzki W. :Mechanical properties of aluminium laminates produced by accumulative roll bonding In: Crystal Research and Technology 48 (2013 ), p. 532-537 ISSN: 0232-1300 DOI: 10.1002/crat.201300121
Depner-Miller U. , Ellermeier J. , Scheerer H. , Oechsner M. , Bobzin K. , Bagcivan N. , Broegelmann T. , Weiss R. , Durst K. , Schmid C. :Influence of application technology on the erosion resistance of DLC coatings In: Surface & Coatings Technology 237 (2013 ), p. 284-291 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2013.07.043
Felfer P. , Ceguerra A. , Ringer S. , Cairney J. :Applying computational geometry techniques for advanced feature analysis in atom probe data In: Ultramicroscopy 132 (2013 ), p. 100-106 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2013.03.004
Gault B. , Felfer P. , Ivermark M. , Bergqvist H. , Cairney JM. , Ringer SP. :Atom probe microscopy characterization of as quenched Zr-0.8 wt% Fe and Zr-0.15 wt% Cr binary alloys In: Materials Letters 91 (2013 ), p. 63-66 ISSN: 0167-577X DOI: 10.1016/j.matlet.2012.09.059
Göken M. , Hausöl T. , Höppel HW. :Fatigue Life, Cyclic Deformation Behaviour and Damage Mechanisms of Ultrafine-Grained AA5754 Aluminum Alloy Produced by Accumulative Roll Bonding In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013
Hay J. , Maier V. , Durst K. , Göken M. :Strain-rate sensitivity (SRS) of nickel by instrumented indentation 2012 Annual Conference on Experimental and Applied Mechanics (Costa Mesa, CA ) DOI: 10.1007/978-1-4614-4436-7_8
Hay J. , Maier V. , Durst K. , Göken M. :Strain rate sensitivity (SRS) of Nickel by Instrumented Indentation In: Conference Proceedings of the Society for Experimental Mechanics Series 6 2013 DOI: 10.1007/978-1-4614-4436-7_8
Hoi Pang Ng . , Przybilla T. , Schmidt C. , Lapovok R. , Orlov D. , Höppel HW. , Göken M. :Asymmetric accumulative roll bonding of aluminium-titanium composite sheets In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 576 (2013 ), p. 306-315 ISSN: 0921-5093 DOI: 10.1016/j.msea.2013.04.027
Hoi Pang Ng . , Przybilla T. , Schmidt C. , Lapovok R. , Orlov D. , Höppel HW. , Göken M. :Asymmetric accumulative roll bonding of aluminium–titanium composite sheets In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 576 (2013 ), p. 306-315 ISSN: 0921-5093 DOI: 10.1016/j.msea.2013.04.027
Kommer M. , Schwub S. , Göken M. , Höppel HW. , Freudenberger J. :Cyclic Deformation Behaviour and Damage Mechanisms in CuAgZr Alloys In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013
Krottenthaler M. , Schmid C. , Schaufler J. , Durst K. , Göken M. :A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation In: Surface & Coatings Technology 215 (2013 ), p. 247-252 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2012.08.095
Kurtovic A. , Niendorf T. , Hausöl T. , Höppel HW. , Göken M. , Maier HJ. :Surface strain evolution of ultrafine-grained aluminum alloy laminates under tension-Microscale plastic instabilities and the Portevin-Le Chatelier effect In: Scripta Materialia 68 (2013 ), p. 809-812 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2013.01.036
Kurtovic A. , Niendorf T. , Hausöl T. , Höppel HW. , Göken M. , Maier HJ. :Surface strain evolution of ultrafme-grained aluminum alloy laminates under tension - Microscale plastic instabilities and the Portevin-Le Chatelier effect In: Scripta Materialia 68 (2013 ), p. 809-812 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2013.01.036
Maier V. , Merle B. , Göken M. , Durst K. :An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures In: Journal of Materials Research 28 (2013 ), p. 1177-1188 ISSN: 0884-2914 DOI: 10.1557/jmr.2013.39 URL: https://opus4.kobv.de/opus4-fau/frontdoor/deliver/index/docId/5014/file/Maier_Improved.pdf
Mughrabi H. :Cyclic slip irreversibility and fatigue life: A microstructure-based analysis In: Acta Materialia 61 (2013 ), p. 1197-1203 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2012.10.029
Mughrabi H. :Cyclic strain rate effects in fatigued face-centred and body-centred cubic metals In: Philosophical Magazine 93 (2013 ), p. 3821-3834 ISSN: 0031-8086 DOI: 10.1080/14786435.2013.779396
Mughrabi H. :Damage mechanisms and fatigue lives: From the low to the very high cycle regime In: Procedia Engineering 55 (2013 ), p. 636-644 ISSN: 1877-7058 DOI: 10.1016/j.proeng.2013.03.307
Mughrabi H. :Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis In: International Journal of Fatigue 57 (2013 ), p. 2-8 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2012.06.007
Möller J. , Prakash A. , Bitzek E. :FE2AT - Finite element informed atomistic simulations In: Modelling and Simulation in Materials Science and Engineering 21 (2013 )ISSN: 0965-0393 DOI: 10.1088/0965-0393/21/5/055011
Niendorf T. , Boehner A. , Höppel HW. , Göken M. , Valiev RZ. , Maier HJ. :Comparison of the monotonic and cyclic mechanical properties of ultrafine-grained low carbon steels processed by continuous and conventional equal channel angular pressing In: Materials & Design 47 (2013 ), p. 138-142 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2012.12.025
Pyczak F. , Bauer A. , Göken M. , Neumeier S. , Lorenz U. , Oehring M. , Schell N. , Schreyer A. , Stark A. , Symanzik F. :Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 571 (2013 ), p. 13-18 ISSN: 0921-5093 DOI: 10.1016/j.msea.2013.02.007
Pyczak F. , Bauer A. , Göken M. , Neumeier S. , Lorenz U. , Oehring M. , Schell N. , Schreyer A. , Stark A. , Symanzik F. :Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 571 (2013 ), p. 13-18 ISSN: 0921-5093 DOI: 10.1016/j.msea.2013.02.007
Quentin UH. , Heberle J. , Held CC. , Schmidt M. :Laser Droplet Brazing for Electrical Contacting of Composite Materials with Integrated Active Elements In: Procedia Materials Science 2 (2013 ), p. 181-188 ISSN: 2211-8128 DOI: 10.1016/j.mspro.2013.02.022 URL: http://www.sciencedirect.com/science/article/pii/S2211812813000230
Rahim M. , Frenzel J. , Frotscher M. , Pfetzing-Micklich J. , Steegmueller R. , Wohlschloegel M. , Mughrabi H. , Eggeler G. :Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys In: Acta Materialia 61 (2013 ), p. 3667-3686 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2013.02.054
Ruppert M. , Böhm W. , Nguyen H. , Höppel HW. , Merklein M. , Göken M. :Influence of upscaling accumulative roll bonding on the homogeneity and mechanical properties of AA1050A In: Journal of Materials Science 48 (2013 ), p. 8377-8385 ISSN: 0022-2461 DOI: 10.1007/s10853-013-7648-3
Samudrala SK. , Felfer P. , Araullo-Peters VJ. , Cao Y. , Liao XZ. , Cairney JM. :New atom probe approaches to studying segregation in nanocrystalline materials In: Ultramicroscopy 132 (2013 ), p. 158-163 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2012.12.013
Schmid C. , Maier V. , Schaufler J. , Butz B. , Spiecker E. , Meier S. , Göken M. , Durst K. :Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy In: Thin Solid Films 528 (2013 ), p. 263-268 ISSN: 0040-6090 DOI: 10.1016/j.tsf.2012.05.092
Umeno Y. , Nöhring WG. , Iskandarov A. , Bitzek E. :Atomistic Model Analysis of Local and Global Instabilities in Crystals at Finite Temperature In: Key Engineering Materials 592-593 (2013 ), p. 39-42 ISSN: 1013-9826 DOI: 10.4028/www.scientific.net/KEM.592-593.39 URL: https://www.scientific.net/KEM.592-593.39
Walter C. , Wheeler JM. , Barnard JS. , Raghavan R. , Korte S. , Gille P. , Michler J. , Clegg WJ. :Anomalous yielding in the complex metallic alloy Al13Co4 In: Acta Materialia 61 (2013 ), p. 7189-7196 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2013.08.023
Wheeler JM. , Maier V. , Durst K. , Göken M. , Michler J. :Activation parameters for deformation of ultrafine-grained aluminium as determined by indentation strain rate jumps at elevated temperature In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 585 (2013 ), p. 108-113 ISSN: 0921-5093 DOI: 10.1016/j.msea.2013.07.033
Xiang Y. , Chitry V. , Liddicoat P. , Felfer P. , Cairney J. , Ringer S. , Kruse N. :Long-Chain Terminal Alcohols through Catalytic CO Hydrogenation In: Journal of the American Chemical Society 135 (2013 ), p. 7114-7117 ISSN: 0002-7863 DOI: 10.1021/ja402512r
Xie KY. , Shrestha S. , Cao Y. , Felfer P. , Wang Y. , Liao X. , Cairney JM. , Ringer SP. :The effect of pre-existing defects on the strength and deformation behavior of α-Fe nanopillars In: Acta Materialia 61 (2013 ), p. 439-452 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2012.09.022
Xie KY. , Shrestha SL. , Felfer P. , Cairney JM. , Killmore CR. , Carpenter KR. , Kaul HR. , Ringer SP. :High strength and retained ductility achieved in a nitrided strip cast Nb-microalloyed steel In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 44 (2013 ), p. 848-855 ISSN: 1073-5623 DOI: 10.1007/s11661-012-1446-4
2012
Alam T. , Felfer P. , Chaturvedi M. , Stephenson LT. , Kilburn MR. , Cairney JM. :Segregation of B, P, and C in the ni-based superalloy, Inconel 718 In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 (2012 ), p. 2183-2191 ISSN: 1073-5623 DOI: 10.1007/s11661-012-1085-9
Amberger D. , Eisenlohr P. , Göken M. :On the importance of a connected hard-phase skeleton for the creep resistance of Mg alloys In: Acta Materialia 60 (2012 ), p. 2277-2289 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2012.01.017
Batentschuk M. , Geisler R. , Hum J. , Iqbal F. , Meister F. , Osvet A. , Stiegelschmitt A. , Winnacker A. :Eu2+ and Eu3+ based "concentrated phosphors" as converters for UV LED light: two approaches and two new examples In: Applied Physics B-Lasers and Optics 106 (2012 ), p. 211-221 ISSN: 0946-2171 DOI: 10.1007/s00340-011-4735-5
Bauer A. , Neumeier S. , Pyczak F. , Göken M. :Creep Strength and Microstructure of Polycrystalline γ′ - Strengthened Cobalt-Base Superalloys DOI: 10.1002/9781118516430.ch77
Bauer A. , Neumeier S. , Pyczak F. , Singer R. , Göken M. :Creep properties of different γ'-strengthened Co-base superalloys In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 550 (2012 ), p. 333-341 ISSN: 0921-5093 DOI: 10.1016/j.msea.2012.04.083
Bestmann M. , Pennacchioni G. , Nielsen S. , Göken M. , de Wall H. :Deformation and ultrafine dynamic recrystallization of quartz in pseudotachylyte-bearing brittle faults: A matter of a few seconds In: Journal of Structural Geology 38 (2012 ), p. 21-38 ISSN: 0191-8141 DOI: 10.1016/j.jsg.2011.10.001
Bitzek E. :Atomistic Study of Twinning in Gold Nanowhiskers In: Journal of Solid Mechanics and Materials Engineering 6 (2012 ), p. 99-105 ISSN: 1880-9871 DOI: 10.1299/jmmp.6.99
Boehner A. , Niendorf T. , Amberger D. , Höppel HW. , Göken M. , Maier HJ. :Martensitic transformation in ultrafine-grained stainless steel AISI 304l under monotonic and cyclic loading In: Metals 2 (2012 ), p. 56-64 ISSN: 2075-4701 DOI: 10.3390/met2010056
Böhner A. , Höppel HW. , May J. , Göken M. :Influence of the ECAP processing parameters on the cyclic deformation behavior on ultrafine-grained cubic face centered metals In: Advanced Engineering Materials 14 (2012 ), p. 842-847 ISSN: 1438-1656 DOI: 10.1002/adem.201100217
Chekhonin P. , Beausir B. , Scharnweber J. , Oertel CG. , Hausöl T. , Höppel HW. , Brokmeier HG. , Skrotzki W. :Confined recrystallization of high-purity aluminium during accumulative roll bonding of aluminium laminates In: Acta Materialia 60 (2012 ), p. 4661-4671 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2012.04.004
Chekhonin P. , Beausir B. , Scharnweber J. , Oertel CG. , Jaschinski J. , Hausöl T. , Höppel HW. , Brokmeier HG. , Skrotzki W. :Mechanical anisotropy of aluminium laminates produced by ARB In: Materials Science Forum 702-703 (2012 ), p. 151-156 ISSN: 0255-5476 DOI: 10.4028/www.scientific.net/MSF.702-703.151
Durst K. , Rehman HU. , Merle B. :Comment to paper "penetration depth and tip radius dependence on the correction factor in nanoindentation measurements" by J.M. Meza et al. [J. Mater. Res. 23(3), 725 (2008)] In: Journal of Materials Research 27 (2012 ), p. 1205-1207 ISSN: 0884-2914 DOI: 10.1557/jmr.2012.41
Felfer P. , Alam T. , Ringer SP. , Cairney JM. :A reproducible method for damage-free site-specific preparation of atom probe tips from interfaces In: Microscopy Research and Technique 75 (2012 ), p. 484-491 ISSN: 1059-910X DOI: 10.1002/jemt.21081
Felfer P. , Gault B. , Sha G. , Stephenson L. , Ringer SP. , Cairney JM. :A new approach to the determination of concentration profiles in atom probe tomography In: Microscopy and Microanalysis 18 (2012 ), p. 359-364 ISSN: 1431-9276 DOI: 10.1017/S1431927611012530
Felfer P. , Killmore CR. , Williams JG. , Carpenter KR. , Ringer SP. , Cairney JM. :A quantitative atom probe study of the Nb excess at prior austenite grain boundaries in a Nb microalloyed strip-cast steel In: Acta Materialia 60 (2012 ), p. 5049-5055 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2012.06.013
Göken Mathias, Höppel Heinz Werner, Hausöl Tina, Bach Jochen, Maier Verena, Schmidt Christian W., Amberger Dorothea:Grain refinement and deformation mechanisms in heterogeneous ultrafine-grained materials processed by accumulative roll bonding Proceedings of the 33rd Risø International Symposium on Materials Science In: Nanometals - status and perspective 2012
Göken M. , Höppel HW. , Hausöl T. , Bach J. , Maier V. , Schmidt C. , Amberger D. :GRAIN REFINEMENT AND DEFORMATION MECHANISMS IN HETEROGENEOUS ULTRAFINE-GRAINED MATERIALS PROCESSED BY ACCUMULATIVE ROLL BONDING
Göken M. , Webler R. , Krottenthaler M. , Neumeier S. , Durst K. :Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests John Wiley and Sons , 2012 ISBN: 9780470943205 DOI: 10.1002/9781118516430.ch10
Hausöl T. , Höppel HW. , Göken M. :Ultrafine-grained AA6014/AA5754 laminates produced by accumulative roll bonding (ARB) In: Materialwissenschaft und Werkstofftechnik 43 (2012 ), p. 334-339 ISSN: 0933-5137 DOI: 10.1002/mawe.201200950
Hausöl T. , Schmidt C. , Maier V. , Böhm W. , Nguyen MH. , Merklein M. , Höppel HW. , Göken M. :Formability of ultrafine-grained AA6016 sheets processed by accumulative roll bonding In: Key Engineering Materials 504-506 (2012 ), p. 575-580 ISSN: 1013-9826 DOI: 10.4028/www.scientific.net/KEM.504-506.575
Heckl A. , Cenanovic S. , Göken M. , Singer R. :Discontinuous precipitation and phase stability in Re- and Ru-containing nickel-base superalloys In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 (2012 ), p. 10-19 ISSN: 1073-5623 DOI: 10.1007/s11661-011-0833-6
Held CC. , Quentin UH. , Heberle J. , Gürtler FJ. , Weigl M. , Schmidt M. :Laser Droplet Brazing for the Electrical Contacting of Composite Materials with Integrated Active Elements In: Physics Procedia 39 (2012 ), p. 585-593 ISSN: 1875-3892 DOI: 10.1016/j.phpro.2012.10.077 URL: http://www.sciencedirect.com/science/article/pii/S1875389212026041
Hetzner H. , Schaufler J. , Pejic G. , Tremmel S. , Durst K. , Wartzack S. :Investigation on the tribological-mechanical behavior of amorphous carbon coatings by load-scanning tests In: Materialwissenschaft und Werkstofftechnik 43 (2012 ), p. 226-233 ISSN: 0933-5137 DOI: 10.1002/mawe.201200846
Hetzner H. , Schaufler J. , Tremmel S. , Durst K. , Wartzack S. :Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests In: Surface & Coatings Technology 206 (2012 ), p. 4864-4871 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2012.05.077
Hetzner H. , Schaufler J. , Tremmel S. , Durst K. , Wartzack S. :Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests In: Surface & Coatings Technology 212 (2012 ), p. 46 - 54 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2012.09.012
Howie PR. , Korte S. , Clegg WJ. :Fracture modes in micropillar compression of brittle crystals In: Journal of Materials Research 27 (2012 ), p. 141-151 ISSN: 0884-2914 DOI: 10.1557/jmr.2011.256
Höppel HW. , Pippan R. , Motz C. , Le Bourhis E. :Nanostructured materials In: Advanced Engineering Materials 14 (2012 )ISSN: 1438-1656 DOI: 10.1002/adem.201200306
Höppel HW. , Pippan R. , Motz C. , Le Bourhis E. :Nanostructured Materials In: Advanced Engineering Materials 14 (2012 ), p. 941-941 ISSN: 1438-1656 DOI: 10.1002/adem.201200306
Iqbal F. , Ast J. , Göken M. , Durst K. :In situ micro-cantilever tests to study fracture properties of NiAl single crystals In: Acta Materialia 60 (2012 ), p. 1193-1200 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2011.10.060
Korte S. , Clegg WJ. :Studying plasticity in hard and soft Nb-Co intermetallics In: Advanced Engineering Materials 14 (2012 ), p. 991-997 ISSN: 1438-1656 DOI: 10.1002/adem.201200175
Korte S. , Stearn RJ. , Wheeler JM. , Clegg WJ. :High temperature microcompression and nanoindentation in vacuum In: Journal of Materials Research 27 (2012 ), p. 167-176 ISSN: 0884-2914 DOI: 10.1557/jmr.2011.268
Maier V. , Hausöl T. , Schmidt C. , Böhm W. , Hung Nguyen . , Merklein M. , Höppel HW. , Göken M. :Tailored heat treated accumulative roll bonded aluminum blanks: Microstructure and mechanical behavior In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 (2012 ), p. 3097-3107 ISSN: 1073-5623 DOI: 10.1007/s11661-012-1151-3
Merle B. , Durst K. , Hamad-Ur-Rehman . :Comment to paper "Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements" by JM Meza et al. [J. Mater. Res. 23(3), 725 (2008)] In: Journal of Materials Research 27 (2012 ), p. 1205-1207 ISSN: 0884-2914 DOI: 10.1557/jmr.2012.41 (anderer)
Merle B. , Maier V. , Göken M. , Durst K. :Experimental determination of the effective indenter shape and epsilon-factor for nanoindentation by continuously measuring the unloading stiffness In: Journal of Materials Research 27 (2012 ), p. 214-221 ISSN: 0884-2914 DOI: 10.1557/jmr.2011.245 URL: https://opus4.kobv.de/opus4-fau/files/2988/merle_experimental_4245.pdf
Merle B. , Maier V. , Göken M. , Durst K. :Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness In: Journal of Materials Research 27 (2012 ), p. 214-221 ISSN: 0884-2914 DOI: 10.1557/jmr.2011.245 URL: https://opus4.kobv.de/opus4-fau/files/2988/merle_experimental_4245.pdf
Merle B. , Schweitzer E. , Göken M. :Thickness and grain size dependence of the strength of copper thin films as investigated with bulge tests and nanoindentations In: Philosophical Magazine 92 (2012 ), p. 3172-3187 ISSN: 0031-8086 DOI: 10.1080/14786435.2012.685773
Meszaros R. , Merle B. , Wild M. , Durst K. , Göken M. , Wondraczek L. :Effect of thermal annealing on the mechanical properties of low-emissivity physical vapor deposited multilayer-coatings for architectural applications In: Thin Solid Films 520 (2012 ), p. 7130-7135 ISSN: 0040-6090 DOI: 10.1016/j.tsf.2012.07.086
Mompiou F. , Caillard D. , Legros M. , Mughrabi H. :In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium In: Acta Materialia 60 (2012 ), p. 3402-3414 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2012.02.049
Neumeier S. , Webler R. , Krottenthaler M. , Durst K. , Göken M. :Local fracture toughness and residual stress measurements on NiAl bond coats by micro cantilever and fib-based bar milling tests 12th International Symposium on Superalloys, Superalloys 2012 (Seven Springs, PA ) URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84885926632∨igin=inward
Rehman HU. , Ahmed F. , Schmid C. , Schaufler J. , Durst K. :Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and cohesive zone FEM modeling In: Surface & Coatings Technology 207 (2012 ), p. 163-169 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2012.06.049
Sarkar S. , Li J. , Cox WT. , Bitzek E. , Lenosky TJ. , Wang Y. :Finding activation pathway of coupled displacive-diffusional defect processes in atomistics: Dislocation climb in fcc copper In: Physical Review B 86 (2012 )ISSN: 0163-1829 DOI: 10.1103/PhysRevB.86.014115
Schaufler J. , Durst K. , Haas T. , Nolte R. , Höppel HW. , Göken M. :The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens In: International Journal of Fatigue 37 (2012 ), p. 1-7 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2011.09.008
Schaufler J. , Schmid C. , Durst K. , Göken M. :Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending In: Thin Solid Films 522 (2012 ), p. 480-484 ISSN: 0040-6090 DOI: 10.1016/j.tsf.2012.08.031
Schloffer M. , Iqbal F. , Gabrisch H. , Schwaighofer E. , Schimansky FP. , Mayer S. , Stark A. , Lippmann T. , Göken M. , Pyczak F. , Clemens H. :Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy In: Intermetallics 22 (2012 ), p. 231-240 ISSN: 0966-9795 DOI: 10.1016/j.intermet.2011.11.015
Schloffer M. , Iqbal F. , Gabrisch H. , Schwaighofer E. , Schimansky FP. , Mayer S. , Stark A. , Lippmann T. , Göken M. , Pyczak F. , Clemens H. :Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy In: Intermetallics 22 (2012 ), p. 231-240 ISSN: 0966-9795 DOI: 10.1016/j.intermet.2011.11.015
Schmidt C. , Ruppert M. , Höppel HW. , Nachtrab F. , Dietrich A. , Hanke R. , Göken M. :Design of graded materials by particle reinforcement during accumulative roll bonding In: Advanced Engineering Materials 14 (2012 ), p. 1009-1017 ISSN: 1438-1656 DOI: 10.1002/adem.201200046
Sedlmayr A. , Bitzek E. , Gianola DS. , Richter G. , Moenig R. , Kraft O. :Existence of two twinning-mediated plastic deformation modes in Au nanowhiskers In: Acta Materialia 60 (2012 ), p. 3985-3993 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2012.03.018
Wartzack S. , Pejic G. , Durst K. , Schaufler J. , Hetzner H. , Tremmel S. :Untersuchung des tribologisch-mechanischen Verhaltens amorpher Kohlenstoffschichten mittels Load Scanner 43 (2012 ), p. 226-233 ISSN: 0933-5137 DOI: 10.1002/mawe.201200846
Yasir M. , Mori G. , Wieser H. , Reller A. , Höppel HW. :Study of sensitization and different heating cycles on stainless steels used for automotive exhaust components In: Materials and Corrosion-Werkstoffe und Korrosion 63 (2012 ), p. 763-776 ISSN: 0947-5117 DOI: 10.1002/maco.201106255
2011
Bestmann M. , Pennacchioni G. , Frank G. , Göken M. , de Wall H. :Pseudotachylyte in muscovite-bearing quartzite: Coseismic friction-induced melting and plastic deformation of quartz In: Journal of Structural Geology 33 (2011 ), p. 169-186 ISSN: 0191-8141 DOI: 10.1016/j.jsg.2010.10.009
Bhowmik A. , Pang HT. , Neumeier S. , Stone HJ. , Edmonds I. :Microstructure and oxidation resistance of Cr-Ta-Si alloys 2010 MRS Fall Meeting (USA , 29. November 2010 - 3. December 2010 )In: Materials Research Society Symposium Proceedings 2011 DOI: 10.1557/opl.2011.38
Blum W. , Eisenlohr P. :Structure evolution and deformation resistance in production and application of ultrafine-grained materials - The concept of steady-state grains In: Materials Science Forum 683 (2011 ), p. 163-181 ISSN: 0255-5476 DOI: 10.4028/www.scientific.net/MSF.683.163
Blum W. , Li YJ. , Zhang Y. , Wang JT. :Deformation resistance in the transition from coarse-grained to ultrafine-grained Cu by severe plastic deformation up to 24 passes of ECAP In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011 ), p. 8621-8627 ISSN: 0921-5093 DOI: 10.1016/j.msea.2011.08.010
Blum W. , Zeng XH. :Corrigendum to “A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity” (Acta Materialia (2009) 57 (1966-1974)) In: Acta Materialia 59 (2011 )ISSN: 1359-6454 DOI: 10.1016/j.actamat.2011.05.032
Blum W. , Zeng XH. :Erratum: A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity (Acta Materialia (2009) 57 (1966-1974)) In: Acta Materialia 59 (2011 ), p. 6205-6206 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2011.05.032
Boehner A. , Maier V. , Durst K. , Höppel HW. , Göken M. :Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials In: Advanced Engineering Materials 13 (2011 ), p. 251-255 ISSN: 1438-1656 DOI: 10.1002/adem.201000270
Felfer P. , Ringer SP. , Cairney JM. :Shaping the lens of the atom probe: Fabrication of site specific, oriented specimens and application to grain boundary analysis In: Ultramicroscopy 111 (2011 ), p. 435-439 ISSN: 0304-3991 DOI: 10.1016/j.ultramic.2010.12.005
Franke O. , Göken M. , Meyers MA. , Durst K. , Hodge AM. :Dynamic nanoindentation of articular porcine cartilage In: Materials Science and Engineering C 31 (2011 ), p. 789-795 ISSN: 0928-4931 DOI: 10.1016/j.msec.2010.12.005
Göken M. , Hemker KJ. , Eberl C. , Ma K. , Schoenung JM. , Funk M. :High-temperature mechanical behavior of end-of-life cryomilled NiCrAlY bond coat materials 42 (2011 ), p. 2233-2241 ISSN: 1073-5623 DOI: 10.1007/s11661-011-0659-2
Göken M. , Höppel HW. :Fatigue behaviour in nanostructured metals Elsevier Ltd. , 2011 ISBN: 9781845696702 DOI: 10.1533/9780857091123.3.507
Göken M. , Höppel HW. :Tailoring nanostructured, graded, and particle-reinforced Al laminates by accumulative roll bonding In: Advanced Materials 23 (2011 ), p. 2663-2668 ISSN: 0935-9648 DOI: 10.1002/adma.201100407
Göken M. , Köysal O. :Effect of frequency on dielectric properties of liquid crystal doped with side-chain liquid crystalline polymer In: Materials Chemistry and Physics 129 (2011 ), p. 1142-1145 ISSN: 0254-0584 DOI: 10.1016/j.matchemphys.2011.05.076
Hausöl T. , Höppel HW. , Göken M. :Microstructure and mechanical properties of accumulative roll bonded AA6014/AA5754 aluminium laminates In: Materials Science Forum 667-669 (2011 ), p. 217-222 ISSN: 0255-5476 DOI: 10.4028/www.scientific.net/MSF.667-669.217
Heckl A. , Neumeier S. , Cenanovic S. , Göken M. , Singer R. :Reasons for the enhanced phase stability of Ru-containing nickel-based superalloys In: Acta Materialia 59 (2011 ), p. 6563-6573 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2011.07.002
Heckl A. , Neumeier S. , Göken M. , Singer R. :The effect of Re and Ru on γ/γ′ microstructure, γ-solid solution strengthening and creep strength in nickel-base superalloys In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011 ), p. 3435-3444 ISSN: 0921-5093 DOI: 10.1016/j.msea.2011.01.023
Höppel HW. , Göken M. , May L. , Prell M. :Influence of grain size and precipitation state on the fatigue lives and deformation mechanisms of CP aluminium and AA6082 in the VHCF-regime 33 (2011 ), p. 10-18 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2010.04.013
Höppel HW. , Kriebel F. , Lapovok R. , Boehner A. , Göken M. :Influence of backpressure during ECAP on the monotonic and cyclic deformation behavior of AA5754 and Cu99.5 13 (2011 ), p. 269-274 ISSN: 1438-1656 DOI: 10.1002/adem.201000269
Jennett NM. , Göken M. , Durst K. :Nano-mechanical testing in materials research and development In: Philosophical Magazine 91 (2011 ), p. 1035-1036 ISSN: 0031-8086 DOI: 10.1080/14786435.2011.561524
Klein L. , Bauer A. , Neumeier S. , Göken M. , Virtanen S. :High temperature oxidation of γ/γ′-strengthened Co-base superalloys In: Corrosion Science 53 (2011 ), p. 2027-2034 ISSN: 0010-938X DOI: 10.1016/j.corsci.2011.02.033
Klein L. , Bauer A. , Neumeier S. , Göken M. , Virtanen S. :High temperature oxidation of γ/γ′-strengthened Co-base superalloys In: Corrosion Science 53 (2011 ), p. 2027-2034 ISSN: 0010-938X DOI: 10.1016/j.corsci.2011.02.033
Korn M. , Lapovok R. , Böhner A. , Höppel HW. , Mughrabi H. :Bimodal grain size distributions in UFG materials produced by SPD - Their evolution and effect on the fatigue and monotonic strength properties In: Kovove Materialy-Metallic Materials 49 (2011 ), p. 51-63 ISSN: 0023-432X DOI: 10.4149/km-2011-1-51
Korte S. , Barnard JS. , Stearn RJ. , Clegg WJ. :Deformation of silicon - Insights from microcompression testing at 25-500 °c In: International Journal of Plasticity 27 (2011 ), p. 1853-1866 ISSN: 0749-6419 DOI: 10.1016/j.ijplas.2011.05.009
Korte S. , Ritter M. , Jiao C. , Midgley PA. , Clegg WJ. :Three-dimensional electron backscattered diffraction analysis of deformation in MgO micropillars In: Acta Materialia 59 (2011 ), p. 7241-7254 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2011.08.022
Li J. , Sarkar S. , Cox WT. , Lenosky TJ. , Bitzek E. , Wang Y. :Diffusive molecular dynamics and its application to nanoindentation and sintering In: Physical Review B 84 (2011 )ISSN: 0163-1829 DOI: 10.1103/PhysRevB.84.054103
Lodes M. , Hartmaier A. , Göken M. , Durst K. :Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations In: Acta Materialia 59 (2011 ), p. 4264-4273 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2011.03.050
Maier V. , Durst K. , Müller J. , Backes B. , Höppel HW. , Göken M. :Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al In: Journal of Materials Research 26 (2011 ), p. 1421-1430 ISSN: 0884-2914 DOI: 10.1557/jmr.2011.156
Mekala SR. , Eisenlohr P. , Blum W. :Control of dynamic recovery and strength by subgrain boundaries - Insights from stress-change tests on CaF2 single crystals In: Philosophical Magazine 91 (2011 ), p. 908-931 ISSN: 0031-8086 DOI: 10.1080/14786435.2010.535324
Merle B. , Göken M. :Fracture toughness of silicon nitride thin films of different thicknesses as measured by bulge tests In: Acta Materialia 59 (2011 ), p. 1772-1779 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2010.11.043
Meszaros R. , Wild M. , Merle B. , Wondraczek L. :Flexural strength of PVD coated float glass for architectural applications In: Glass Technology-European Journal of Glass Science and Technology Part A 52 (2011 ), p. 190-196 ISSN: 1753-3546
Minshull JP. , Neumeier S. , Tucker MG. , Stone HJ. :A1-L1(2) structures in the Al-Co-Ni-Ti quaternary phase system DOI: 10.4028/www.scientific.net/AMR.278.399
Ndlovu S. , Durst K. , Göken M. :Deformation of WC-Co Hardmetals During Scratch Testing Wiley-VCH , 2011 ISBN: 9783527323661 DOI: 10.1002/9783527628513.ch20
Neumeier S, Ang J, Hobbs RA, Rae CMF, Stone HJ:Lattice misfit of high refractory ruthenium containing nickel-base superalloys In: Advanced Materials Research 278 (2011 ), p. 60-+ ISSN: 1022-6680 DOI: 10.4028/www.scientific.net/AMR.278.60
Neumeier S. , Dinkel M. , Pyczak F. , Göken M. :Nanoindentation and XRD investigations of single crystalline Ni-Ge brazed nickel-base superalloys PWA 1483 and René N5 In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011 ), p. 815-822 ISSN: 0921-5093 DOI: 10.1016/j.msea.2010.09.065
Neumeier S. , Pyczaky F. , Göken M. :Influence of rhenium and ruthenium on the local mechanical properties of the c and c0 phases in nickel-base superalloys In: Philosophical Magazine 91 (2011 ), p. 4187-4199 ISSN: 0031-8086 DOI: 10.1080/14786435.2011.607139
Pedimonte J. , Travitzky N. , Korn M. , Kriegelstein S. , Greil P. :Surface modification of an alumina-based bioceramic for cement application In: Advanced Engineering Materials 13 (2011 )ISSN: 1438-1656 DOI: 10.1002/adem.201180004
Pfeiffer C. , Affeldt E. , Göken M. :Miniaturized bend tests on partially stabilized EB-PVD ZrO2 thermal barrier coatings In: Surface & Coatings Technology 205 (2011 ), p. 3245-3250 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2010.11.047
Pfeiffer C. , Affeldt E. , Göken M. :Miniaturized bend tests on partially stabilized EB-PVD ZrO2 thermal barrier coatings In: Surface & Coatings Technology 205 (2011 ), p. 3245-3250 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2010.11.047
Rausch MH. , Durst K. , Göken M. , Jakobs PJ. , Leipertz A. , Fröba AP. :Studies on the origin of dropwise condensation of steam on ion implanted metallic surfaces [Untersuchungen zur Ursache der Tropfenkondensation von Wasserdampf an ionenimplantierten Metalloberflächen] In: Chemie Ingenieur Technik 83 (2011 ), p. 545-551 ISSN: 0009-286X DOI: 10.1002/cite.201000182
Ahmed F., Bayerlein K., Rosiwal S., Göken M., Durst K.:Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling In: Acta Materialia 59 (2011 ), p. 5422-5433 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2011.05.015
Schmidt C.W., Knödler P., Höppel H.W., Göken M.:Particle based alloying by accumulative roll bonding in the system Al-Cu In: Metals 1 (2011 ), p. 65-78 ISSN: 2075-4701 DOI: 10.3390/met1010065
Schmidt C. , Höppel HW. , Göken M. :Maßgeschneiderte partikelverstärkte Verbundwerkstoffe und Werkstoffverbunde hergestellt durch den akkumulativen Walzprozess (ARB) 18. Symposium Verbundwerkstoffe In: Tagungsband zum 18. Symposium Verbundwerkstoffe 2011
Schmidt C. , Knieke C. , Maier V. , Höppel HW. , Peukert W. , Göken M. :Accelerated grain refinement during accumulative roll bonding by nanoparticle reinforcement In: Scripta Materialia 64 (2011 ), p. 245--248 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2010.10.013
Schmidt C. , Knieke C. , Maier V. , Höppel HW. , Peukert W. , Göken M. :Influence of Nanoparticle Reinforcement on the Mechanical Properties of Ultrafine-Grained Aluminium Produced by ARB In: Materials Science Forum 667-669 (2011 ), p. 725--730 ISSN: 0255-5476 DOI: 10.4028/www.scientific.net/MSF.667-669.725
Schneibel J.H., Heilmaier M., Blum W., Hasemann G., Shanmugasundaram T.:Temperature dependence of the strength of fine- and ultrafine-grained materials In: Acta Materialia 59 (2011 ), p. 1300-1308 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2010.10.062
Schwarz W. , Schwub S. , Quering K. , Wiedmann D. , Höppel HW. , Göken M. :Life prediction of thermally highly loaded components: Modelling the damage process of a rocket combustion chamber hot wall In: CEAS Space Journal 1 (2011 ), p. 83-97 ISSN: 1868-2502 DOI: 10.1007/s12567-011-0007-9
Schaufler J, Yang G, Durst K, Spiecker E, Goken M:Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems In: Surface & Coatings Technology 205 (2011 ), p. 3429-3433 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2010.12.005
Wolff F. , Zirkel L. , Sarah B. , Jakob M. , Verena M. , Nachtrab F. , Ceron Nicolat B. , Fey T. , Münstädt H. :Using Supercritical Carbon Dioxide for Physical Foaming of Advanced Polymer Materials In: International Polymer Processing 26 (2011 ), p. 437-443 ISSN: 0930-777X DOI: 10.3139/217.2469
Zirkel L. , Maier V. , Durst K. , Münstedt H. :Compression moduli of foamed films of fluorinated ethylene propylene copolymers determined by nanoindentation In: Polymer Testing 30 (2011 ), p. 286-293 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2011.01.005
2010
Amberger D. , Eisenlohr P. , Göken M. :Influence of microstructure on creep strength of MRI 230D Mg alloy In: Journal of Physics : Conference Series 240 (2010 )ISSN: 1742-6588 DOI: 10.1088/1742-6596/240/1/012068
Bauer A. , Neumeier S. , Pyczak F. , Göken M. :Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants In: Scripta Materialia 63 (2010 ), p. 1197-1200 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2010.08.036
Blum W. , Eisenlohr P. :A simple dislocation model of the influence of high-angle boundaries on the deformation behavior of ultrafine-grained materials In: Journal of Physics : Conference Series 240 (2010 )ISSN: 1742-6588 DOI: 10.1088/1742-6596/240/1/012136
Brandt B. , Durst K. , Belli R. , Göken M. , Lohbauer U. :Fracture toughness of GIC—A mechanistic approach on the nanoscale In: Dental Materials 26 (2010 ), p. e32 ISSN: 0109-5641 DOI: 10.1016/j.dental.2010.08.076
Brandt B. , Lohbauer U. , Göken M. , Durst K. :The influence of particle size on the mechanical properties of dental glass ionomer cements In: Advanced Engineering Materials 12 (2010 ), p. B684-B689 ISSN: 1438-1656 DOI: 10.1002/adem.201080067
Brandt B. , Zollfrank C. , Franke O. , Fromm J. , Göken M. , Durst K. :Micromechanics and ultrastructure of pyrolysed softwood cell walls In: Acta Biomaterialia 6 (2010 ), p. 4345-4351 ISSN: 1742-7061 DOI: 10.1016/j.actbio.2010.05.026
Brunner J. , May J. , Höppel HW. , Göken M. , Virtanen S. :Localized corrosion of ultrafine-grained Al-Mg model alloys In: Electrochimica Acta 55 (2010 ), p. 1966-1970 ISSN: 0013-4686 DOI: 10.1016/j.electacta.2009.11.016
Cheng Y. , Bitzek E. , Weygand D. , Gumbsch P. :Atomistic simulation of dislocation-void interactions under cyclic loading In: Modelling and Simulation in Materials Science and Engineering 18 (2010 )ISSN: 0965-0393 DOI: 10.1088/0965-0393/18/2/025006
Durst K., Hofmann S., Backes B., Mueller J., Göken M.:Microimprinting of nanocrystalline metals - Influence of microstructure and work hardening In: Journal of Materials Processing Technology 210 (2010 ), p. 1787-1793 ISSN: 0924-0136 DOI: 10.1016/j.jmatprotec.2010.06.010
Göken M. , Bauer A. , Pyczak F. , Neumeier S. :Microstructure and creep strength of different γ/γ′- strengthened Co-base superalloy variants 63 (2010 ), p. 1197-1200 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2010.08.036
Hausöl T. , Höppel HW. , Göken M. :Microstructure and mechanical properties of accumulative roll bonded aluminium alloy AA5754 In: Journal of Physics: Conference Series 240 (2010 ), Article No.: 012128 ISSN: 1742-6588 DOI: 10.1088/1742-6596/240/1/012128
Hausöl T. , Höppel HW. , Göken M. :Tailoring materials properties of UFG aluminium alloys by accumulative roll bonded sandwich-like sheets In: Journal of Materials Science 45 (2010 ), p. 4733-4738 ISSN: 0022-2461 DOI: 10.1007/s10853-010-4678-y
Hausöl T. , Maier V. , Schmidt C. , Winkler M. , Höppel HW. , Göken M. :Tailoring materials properties by accumulative roll bonding In: Advanced Engineering Materials 12 (2010 ), p. 740-746 ISSN: 1438-1656 DOI: 10.1002/adem.201000044
Heckl A. , Rettig R. , Cenanovic S. , Göken M. , Singer R. :Investigation of the final stages of solidification and eutectic phase formation in Re and Ru containing nickel-base superalloys In: Journal of Crystal Growth 312 (2010 ), p. 2137-2144 ISSN: 0022-0248 DOI: 10.1016/j.jcrysgro.2010.03.041
Höppel HW. , Korn M. , Lapovok R. , Mughrabi H. :Bimodal grain size distributions in UFG materials produced by SPD: Their evolution and effect on mechanical properties DOI: 10.1088/1742-6596/240/1/012147
Höppel HW. , Prell M. , May L. , Göken M. :Influence of grain size and precipitates on the fatigue lives and deformation mechanisms in the VHCF-regime In: Procedia Engineering 2 (2010 ), p. 1025-1034 ISSN: 1877-7058 DOI: 10.1016/j.proeng.2010.03.111
Jang YS. , Jank M. , Maier V. , Durst K. , Travitzky N. , Zollfrank C. :SiC ceramic micropatterns from polycarbosilanes In: Journal of the European Ceramic Society 30 (2010 ), p. 2773-2779 ISSN: 0955-2219 DOI: 10.1016/j.jeurceramsoc.2010.05.019
Maier V. , Höppel HW. , Göken M. :Nanomechanical behaviour of Al-Ti layered composites produced by accumulative roll bonding In: Journal of Physics: Conference Series 240 (2010 ), Article No.: 012108 ISSN: 1742-6588 DOI: 10.1088/1742-6596/240/1/012108
Mompiou F. , Legros M. , Caillard D. , Mughrabi H. :In situ TEM observations of reverse dislocation motion upon unloading of tensile-deformed UFG aluminium In: Journal of Physics : Conference Series 240 (2010 )ISSN: 1742-6588 DOI: 10.1088/1742-6596/240/1/012137
Mughrabi H. :Fatigue, an everlasting materials problem - Still en vogue In: Procedia Engineering 2 (2010 ), p. 3-26 ISSN: 1877-7058 DOI: 10.1016/j.proeng.2010.03.003
Mughrabi H. , Höppel HW. :Cyclic deformation and fatigue properties of very fine-grained metals and alloys In: International Journal of Fatigue 32 (2010 ), p. 1413-1427 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2009.10.007
Negahdari Z. , Willert-Porada M. , Pfeiffer C. :Mechanical properties of dense to porous alumina/lanthanum hexaaluminate composite ceramics In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 527 (2010 ), p. 3005-3009 ISSN: 0921-5093 DOI: 10.1016/j.msea.2010.01.050
Nikulina E. , Durst K. , Göken M. , Voelkl R. , Glatzel U. :Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission electron microscopy and nanoindentation In: International Journal of Materials Research 101 (2010 ), p. 585-588 ISSN: 1862-5282 DOI: 10.3139/146.110316
Prechtel M. , Ronda PL. , Janisch R. , Hartmaier A. , Leugering G. , Steinmann P. , Stingl M. :Simulation of fracture in heterogeneous elastic materials with cohesive zone models In: International Journal of Fracture (2010 )ISSN: 0376-9429 DOI: 10.1007/s10704-010-9552-z
Pyczak F. , Neumeier S. , Göken M. :Temperature dependence of element partitioning in rhenium and ruthenium bearing nickel-base superalloys In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 527 (2010 ), p. 7939-7943 ISSN: 0921-5093 DOI: 10.1016/j.msea.2010.08.091
Rachbauer R. , Massl S. , Stergar E. , Felfer P. , Mayrhofer PH. :Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films In: Surface & Coatings Technology 204 (2010 ), p. 1811-1816 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2009.11.020
Scharnweber J. , Skrotzki W. , Oertel CG. , Brokmeier HG. , Höppel HW. , Topic I. , Jaschinski J. :Texture, microstructure and mechanical properties of ultrafine grained aluminum produced by accumulative roll bonding In: Advanced Engineering Materials 12 (2010 ), p. 989-994 ISSN: 1438-1656 DOI: 10.1002/adem.201000067
Skrotzki W. , Scharnweber J. , Oertel C-. , Höppel HW. , Topic I. , Brokmeier H-. , Jaschinski J. :Plastic anisotropy of ultrafine grained Al alloy AA6016 produced by accumulative roll bonding In: Solid State Phenomena 160 (2010 ), p. 171-176 ISSN: 1012-0394 DOI: 10.4028/www.scientific.net/SSP.160.171
Vevecka-Priftaj A. , Höppel HW. , Göken M. :Deformation behaviour of nanocrystalline al alloy, processed by severe plastic deformation 7th International Conference of the Balkan Physical Union (Alexandroupolis ) DOI: 10.1063/1.3322399
Weidner A. , Amberger D. , Pyczak F. , Schoenbauer B. , Stanzl-Tschegg S. , Mughrabi H. :Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold In: International Journal of Fatigue 32 (2010 ), p. 872-878 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2009.04.004
Zhu YT. , Mathaudhu SN. , Göken M. , Langdon TG. , Lowe TC. , Semiatin SL. , Tsuji N. , Zhao YH. :Preface to the special issue on ultrafine grained materials In: Journal of Materials Science 45 (2010 ), p. 4543-4544 ISSN: 0022-2461 DOI: 10.1007/s10853-010-4709-8
2009
Ahmed F. , Durst K. , Rosiwal S. , Fandrey J. , Schaufler J. , Göken M. :In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy In: Surface & Coatings Technology 204 (2009 ), p. 1022-1025 ISSN: 0257-8972 DOI: 10.1016/j.surfcoat.2009.04.030
Amberger D. , Eisenlohr P. , Göken M. :Microstructural evolution during creep of Ca-containing AZ91 In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009 ), p. 398-402 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.115
Armstrong P. , Knieke C. , Mackovic M. , Frank G. , Hartmaier A. , Göken M. , Peukert W. , Mackovic M. :Microstructural evolution during deformation of tin dioxide nanoparticles in a comminution process In: Acta Materialia 57 (2009 ), p. 3060-3071 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2009.02.049
Backes B. , Durst K. , Amberger D. , Göken M. :Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 40 (2009 ), p. 257-261 ISSN: 1073-5623 DOI: 10.1007/s11661-008-9720-1
Backes B. , Huang YY. , Göken M. , Durst K. :The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism-based strain gradient plasticity theory In: Journal of Materials Research 24 (2009 ), p. 1197-1207 ISSN: 0884-2914 DOI: 10.1557/jmr.2009.0123
Blum W. :Role of boundaries in control of deformation rate and strength of crystalline materials International Conference Recent Developments in the Processing and Applications of Structural Metals and Alloys (ITA , 22. June 2008 - 25. June 2008 )In: Materials Science Forum 2009 DOI: 10.4028/www.scientific.net/msf.604-605.391
Blum W. :Role of boundaries in control of deformation rate and strength of crystalline materials In: Materials Science Forum 604-605 (2009 ), p. 391-401 ISSN: 0255-5476 DOI: 10.4028/3-908453-09-7.391
Blum W. , Eisenlohr P. :Dislocation mechanics of creep In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009 ), p. 7-13 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.110
Blum W. , Eisenlohr P. , Sklenička V. :Creep Behavior of Bulk Nanostructured Materials - Time-Dependent Deformation and Deformation Kinetics In: Michael J. Zehetbauer, Yuntian Theodore Zhu (ed.): Bulk Nanostructured Materials , Weinheim : Wiley-VCH Verlag , 2009 , p. 519-537 ISBN: 9783527315246 DOI: 10.1002/9783527626892.ch24
Blum W. , Li Y. , Durst K. :Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures In: Acta Materialia 57 (2009 ), p. 5207-5217 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2009.07.030
Blum W. , Zeng X. :A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity In: Acta Materialia 57 (2009 ), p. 1966-1974 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2008.12.041
Boehner A. , Janisch R. , Hartmaier A. :Ab initio investigation of diamond coatings on steel In: Scripta Materialia 60 (2009 ), p. 504-507 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2008.11.042
Chilukuru H. , Durst K. , Wadekar S. , Schwienheer M. , Scholz A. , Berger C. , Mayer KH. , Blum W. :Coarsening of precipitates and degradation of creep resistance in tempered martensite steels In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009 ), p. 81-87 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.088
Das J. , Pauly S. , Bostroem M. , Durst K. , Göken M. , Eckert J. :Designing bulk metallic glass and glass matrix composites in martensitic alloys In: Journal of Alloys and Compounds 483 (2009 ), p. 97-101 ISSN: 0925-8388 DOI: 10.1016/j.jallcom.2008.08.139
Eisenlohr P. , Blum W. , Milicka K. :Dislocation glide velocity in creep of Mg alloys derived from dip tests In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009 ), p. 393-397 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.120
Franke O. , Durst K. , Göken M. :Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples In: Journal of Materials Research 24 (2009 ), p. 1127-1134 ISSN: 0884-2914 DOI: 10.1557/jmr.2009.0135
Gebhard S. , Pyczak F. , Göken M. :Microstructural and micromechanical characterisation of TiAl alloys using atomic force microscopy and nanoindentation In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 523 (2009 ), p. 235-241 ISSN: 0921-5093 DOI: 10.1016/j.msea.2009.05.068
Götz-Votteler K. , Herbst T. , Bergenholtz H. :Preface In: Zeitschrift für Anglistik und Amerikanistik (2009 ), p. 215-218 ISSN: 0044-2305
Höppel HW. , Mughrabi H. , Vinogradov A. :Fatigue Properties of Bulk Nanostructured Materials John Wiley and Sons , 2009 ISBN: 9783527315246 DOI: 10.1002/9783527626892.ch22
Kiener D. , Durst K. , Rester M. , Minor AM. :Revealing deformation mechanisms with nanoindentation In: JOM Journal of the Minerals, Metals and Materials Society 61 (2009 ), p. 14-23 ISSN: 1047-4838 DOI: 10.1007/s11837-009-0036-4
Reichstein S., Kraft S., Mughrabi H.:Sequence of distinct microyielding stages of the monocrystalline nickel-base superalloy CMSX-6 at high temperatures In: International Journal of Materials Research 100 (2009 ), p. 494-499 ISSN: 1862-5282 DOI: 10.3139/146.110061
Kumar P. , Kassner ME. , Blum W. , Eisenlohr P. , Langdon TG. :New observations on high-temperature creep at very low stresses In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009 ), p. 20-24 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.094
Mughrabi H. :Cyclic slip irreversibilities and the evolution of fatigue damage In: Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science 40 (2009 ), p. 431-453 ISSN: 1073-5615 DOI: 10.1007/s11663-009-9240-4
Mughrabi H. :Microstructural aspects of high temperature deformation of monocrystalline nickel base superalloys: Some open problems In: Journal of Materials Science & Technology 25 (2009 ), p. 191-204 ISSN: 1005-0302 DOI: 10.1179/174328408X361436
Pyczak F. , Neumeier S. , Göken M. :Influence of lattice misfit on the internal stress and strain states before and after creep investigated in nickel-base superalloys containing rhenium and ruthenium In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009 ), p. 295-300 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.08.052
Rettig R. , Heckl A. , Neumeier S. , Pyczak F. , Göken M. , Singer R. :Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys In: Defect and Diffusion Forum 289-292 (2009 ), p. 101-108 ISSN: 1012-0386 DOI: 10.4028/www.scientific.net/DDF.289-292.101
Sadrabadi P. , Durst K. , Göken M. :Study on the indentation size effect in CaF2: Dislocation structure and hardness In: Acta Materialia 57 (2009 ), p. 1281-1289 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2008.11.015
Sadrabadi P. , Durst K. , Göken M. :Study on the indentation size effect in CaF2: Dislocation structure and hardness In: Acta Materialia 57 (2009 ), p. 1281-1289 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2008.11.015
Sadrabadi P. , Durst K. , Göken M. , Blum W. :Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits In: Philosophical Magazine Letters 89 (2009 ), p. 391-398 ISSN: 0950-0839 DOI: 10.1080/09500830902984554
Sadrabadi P. , Eisenlohr P. , Wehrhan G. , Staeblein J. , Parthier L. , Blum W. :Evolution of dislocation structure and deformation resistance in creep exemplified on single crystals of CaF2 In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009 ), p. 46-50 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.086
Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Raab GI. , Valiev RZ. :Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009 ), p. 145-147 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.082
Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Raab GI. , Valiev RZ. :Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009 ), p. 145-147 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.082
Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Valiev RZ. :Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use In: International Journal of Fatigue 31 (2009 ), p. 322-331 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2008.08.007
Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Valiev RZ. :Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use In: International Journal of Fatigue 31 (2009 ), p. 322-331 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2008.08.007
Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Valiev RZ. :Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use In: International Journal of Fatigue 31 (2009 ), p. 322-331 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2008.08.007
Schaufler J. , Durst K. , Massler O. , Göken M. :In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading In: Thin Solid Films 517 (2009 ), p. 1681-1685 ISSN: 0040-6090 DOI: 10.1016/j.tsf.2008.09.104
Stockmeier M. , Müller R. , Sakwe A. , Wellmann P. , Magerl A. :On the lattice parameters of silicon carbide In: Journal of Applied Physics 105 (2009 ), Article No.: 033511 ISSN: 0021-8979 DOI: 10.1063/1.3074301
Topic I. , Höppel HW. , Göken M. :Friction stir welding of accumulative roll-bonded commercial-purity aluminium AA1050 and aluminium alloy AA6016 In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009 ), p. 163-166 ISSN: 0921-5093 DOI: 10.1016/j.msea.2007.12.057
Wang Y. , Mayer K-. , Scholz A. , Berger C. , Chilukuru H. , Durst K. , Blum W. :Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650 °C In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009 ), p. 180-184 ISSN: 0921-5093 DOI: 10.1016/j.msea.2008.04.116
Ziegenhain G. , Hartmaier A. , Urbassek HM. :Pair vs many-body potentials: Influence on elastic and plastic behavior in nanoindentation of fcc metals In: Journal of the Mechanics and Physics of Solids 57 (2009 ), p. 1514-1526 ISSN: 0022-5096 DOI: 10.1016/j.jmps.2009.05.011
2008
Blum W. :Mechanisms of creep deformation in steel In: Fujio Abe, Torsten-Ulf Kern, R. Viswanathan (ed.): Creep-Resistant Steels , Woodhead Publishing , 2008 (Woodhead Publishing Series in Metals and Surface Engineering)ISBN: 9781845691783 DOI: 10.1533/9781845694012.2.365
Broedling NC. , Hartmaier A. , Buehler MJ. , Gao H. :The strength limit in a bio-inspired metallic nanocomposite In: Journal of the Mechanics and Physics of Solids 56 (2008 ), p. 1086-1104 ISSN: 0022-5096 DOI: 10.1016/j.jmps.2007.06.006
Broedling NC. , Hartmaier A. , Gao H. :Fracture toughness of layered structures: Embrittlement due to confinement of plasticity In: Engineering Fracture Mechanics 75 (2008 ), p. 3743-3754 ISSN: 0013-7944 DOI: 10.1016/j.engfracmech.2007.10.014
Cabibbo M. , Blum W. , Evangelista E. , Kassner ME. , Meyers MA. :Transmission electron microscopy study of strain-induced low- and high-angle boundary development in equal-channel angular-pressed commercially pure aluminum In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 39 (2008 ), p. 181-189 ISSN: 1073-5623 DOI: 10.1007/s11661-007-9350-z
Demakov SL. , Elkina OA. , Illarionov AG. , Karabanalov MS. , Popov AA. , Semenova IP. , Saitova LR. , Shchetnikov NV. :Effect of rolling-assisted deformation on the formation of an ultrafine-grained structure in a two-phase titanium alloy subjected to severe plastic deformation In: Physics of Metals and Metallography 105 (2008 ), p. 602-609 ISSN: 0031-918X DOI: 10.1134/S0031918X08060112
Dinkel M. , Heinz P. , Pyczak F. , Volek A. , Ott M. , Affeldt E. , Vossberg A. , Göken M. , Singer R. :New boron and silicon free single crystal-diffusion brazing alloys 11th International Symposium on Superalloys, SUPERALLOYS 2008 (Seven Springs , 14. September 2008 - 18. September 2008 )In: R.C. Reed, K.A. Kenneth, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, S.A. Woodard (ed.): Superalloys 2008: Proceedings of the 11th Intenational Symposium of Superalloys , Warrendale : 2008 DOI: 10.7449/2008/Superalloys_2008_211_220
Dinkel M. , Pyczak F. , May J. , Höppel HW. , Göken M. :XRD profile analysis characterization of ultrafine grained Al-Mg alloys In: Journal of Materials Science 43 (2008 ), p. 7481-7487 ISSN: 0022-2461 DOI: 10.1007/s10853-008-2859-8
Durst K. , Göken M. , Pharr GM. :Indentation size effect in spherical and pyramidal indentations In: Journal of Physics D-Applied Physics 41 (2008 )ISSN: 0022-3727 DOI: 10.1088/0022-3727/41/7/074005
Eisenlohr P. , Sadrabadi P. , Blum W. :Quantifying the distributions of dislocation spacings and cell sizes In: Journal of Materials Science 43 (2008 ), p. 2700-2707 ISSN: 0022-2461 DOI: 10.1007/s10853-008-2467-7
Franke O. , Göken M. , Hodge AM. :The nanoindentation of soft tissue: Current and developing approaches In: JOM Journal of the Minerals, Metals and Materials Society 60 (2008 ), p. 49-53 ISSN: 1047-4838 DOI: 10.1007/s11837-008-0071-6
Gelse K. , Muehle C. , Franke O. , Park J. , Jehle M. , Durst K. , Göken M. , Hennig F. , Mark K. , Schneider H. :Cell-based resurfacing of large cartilage defects: Long-term evaluation of grafts from autologous transgene-activated periosteal cells in a porcine model of osteoarthritis In: Arthritis & Rheumatism-Arthritis Care & Research 58 (2008 ), p. 475-488 ISSN: 0893-7524 DOI: 10.1002/art.23124
Heinz P. , Volek A. , Singer R. , Dinkel M. , Pyczak F. , Göken M. , Ott M. , Affeldt E. , Vossberg A. :Diffusion brazing of single crystalline nickel base superalloys using boron free nickel base braze alloys In: Defect and Diffusion Forum 273-276 (2008 ), p. 294-299 ISSN: 1012-0386
Higashida K. , Tanaka M. , Hartmaier A. , Hoshino Y. :Analyzing crack-tip dislocations and their shielding effect on fracture toughness In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 (2008 ), p. 13-18 ISSN: 0921-5093 DOI: 10.1016/j.msea.2006.12.174
Hueller M. , Vlcek J. , Dinkel M. , Höppel HW. , Göken M. :Hardening and thermal stability of nanocrystalline AlMg4.8 powder In: Philosophical Magazine 88 (2008 ), p. 1209-1226 ISSN: 0031-8086 DOI: 10.1080/14786430802089854
Höppel HW. , May J. , Göken M. :Cyclic deformation behaviour and fatigue lives of ultrafine-grained aluminium-magnesium alloys 4th International Conference on Nanomaterials by Severe Plastic Deformation (, 18. August 2008 - 22. August 2008 )In: Materials Science Forum 2008 DOI: 10.4028/www.scientific.net/msf.584-586.840
Janisch R. , Elsässer C. :Growth and mechanical properties of a MoC precipitate at a Mo grain boundary: An ab initio density functional theory study In: Physical Review B - Condensed Matter and Materials Physics 77 (2008 ), Article No.: 094118 ISSN: 1550-235X DOI: 10.1103/PhysRevB.77.094118
Li Y.J., Kapoor R., Wang J.T., Blum W.:Structural stability of ultrafine-grained copper In: Scripta Materialia 58 (2008 ), p. 53-56 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2007.08.033
Li Y. , Zeng X. , Blum W. :On the elevated-temperature deformation behavior of polycrystalline Cu subjected to predeformation by multiple compression In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 (2008 ), p. 547-550 ISSN: 0921-5093 DOI: 10.1016/j.msea.2006.09.133
May J. , Amberger D. , Dinkel M. , Höppel HW. , Göken M. :Monotonic and cyclic deformation behaviour of ultrafine-grained aluminium In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 (2008 ), p. 481-484 ISSN: 0921-5093 DOI: 10.1016/j.msea.2006.12.177
Mughrabi H. , Höppel HW. :Assessment of fatigue damage in heterogeneous materials by application of a novel compliancen technique In: Solid Mechanics and Its Applications 152 (2008 ), p. 327-343 ISSN: 0925-0042 DOI: 10.1007/978-1-4020-8520-8-12
Mughrabi H. , Pschenitzka F. :Stresses to bow edge dislocation segments out of di-/multipolar edge dislocation bundles In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 (2008 ), p. 469-473 ISSN: 0921-5093 DOI: 10.1016/j.msea.2006.09.185
Neumeier S. , Pyczak F. , Göken M. :The influence of ruthenium and rhenium on the local properties of the γ- and γ′-phase in nickel-base superalloys and their consequences for alloy behavior 11th International Symposium on Superalloys, Superalloys 2008 (Champion, PA )In: Proceedings of the International Symposium on Superalloys 2008 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=60349117530∨igin=inward
Nützel R. , Affeldt E. , Göken M. :Damage evolution during thermo-mechanical fatigue of a coated monocrystalline nickel-base superalloy In: International Journal of Fatigue 30 (2008 ), p. 313-317 ISSN: 0142-1123 DOI: 10.1016/j.ijfatigue.2007.01.045
Prell M. , Xu C. , Langdon TG. :The evolution of homogeneity on longitudinal sections during processing by ECAP In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 480 (2008 ), p. 449-455 ISSN: 0921-5093 DOI: 10.1016/j.msea.2007.08.011
Saitova L. , Semenova I. , Höppel HW. , Valiev R. , Göken M. :Enhanced superplastic deformation behavior of ultrafine-grained Ti-6Al-4V alloy In: Materialwissenschaft und Werkstofftechnik 39 (2008 ), p. 367-370 ISSN: 0933-5137 DOI: 10.1002/mawe.200800308
Saitova LR. , Höppel HW. , Göken M. , Kilmametov AR. , Semenova IP. , Valiev RZ. :Cycling of ultrafine-grained Ti-6Al-4V ELI alloy: Microstructural changes and enhanced fatigue limit 4th International Conference on Nanomaterials by Severe Plastic Deformation (Goslar , 18. August 2008 - 22. August 2008 ) DOI: 10.4028/www.scientific.net/msf.584-586.827
Skrotzki W. , Hünsche I. , Hüttenrauch J. , Oertel CG. , Brokmeier HG. , Höppel HW. , Topic I. :Texture and mechanical anisotropy of ultrafine-grained aluminum alloy AA6016 produced by accumulative roll bonding In: Texture, Stress, and Microstructure 2008 (2008 )ISSN: 1687-5397 DOI: 10.1155/2008/328754
Tabachnikova ED. , Bengus VZ. , Podolskiy AV. , Smirnov SN. , Csach K. , Miskuf J. , Saitova LR. , Semenova IP. , Valiev RZ. :Microstructure features of failure and mechanical properties of ultra-fine grained Ti-6AL-4V ELI alloy at 300-77 K In: International Journal of Mechanics and Materials in Design 4 (2008 ), p. 189-195 ISSN: 1569-1713 DOI: 10.1007/s10999-007-9036-0
Tabachnikova ED. , Podolskiy AV. , Bengus VZ. , Smirnov SN. , Csach K. , Miškuf J. , Saitova LR. , Semenova IP. , Valiev RZ. :Microstructural features of failure surfaces and low-temperature mechanical properties of Ti-6Al-4V ELI ultra-fine grained alloy In: STRENGTH MATER+ 40 (2008 ), p. 71-74 ISSN: 0039-2316 DOI: 10.1007/s11223-008-0019-7
Topic I. , Höppel HW. , Göken M. :Deformation behaviour of accumulative roll bonded and friction stir welded aluminium alloys 4th International Conference on Nanomaterials by Severe Plastic Deformation (DEU , 18. August 2008 - 22. August 2008 )In: Materials Science Forum 2008 DOI: 10.4028/www.scientific.net/msf.584-586.833
Topic I. , Höppel HW. , Göken M. :Influence of rolling direction on strength and ductility of aluminium and aluminium alloys produced by accumulative roll bonding In: Journal of Materials Science 43 (2008 ), p. 7320-7325 ISSN: 0022-2461 DOI: 10.1007/s10853-008-2754-3
Topic I. , Höppel HW. , Staud D. , Merklein M. , Geiger M. , Göken M. :Formability of accumulative roll bonded aluminum AA1050 and AA6016 investigated using bulge tests In: Advanced Engineering Materials 10 (2008 ), p. 1101-1109 ISSN: 1438-1656 DOI: 10.1002/adem.200800167
Vevecka-Priftaj A. , Böhner A. , May J. , Höppel HW. , Göken M. :Strain rate sensitivity of ultrafine grained aluminium alloy AA6061 4th International Conference on Nanomaterials by Severe Plastic Deformation (Goslar , 18. August 2008 - 22. August 2008 ) DOI: 10.4028/www.scientific.net/msf.584-586.741
Zeng X. , Eisenlohr P. , Blum W. :Modelling the transition from strengthening to softening due to grain boundaries In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 (2008 ), p. 95-98 ISSN: 0921-5093 DOI: 10.1016/j.msea.2006.09.130
2007
Blum W. , Li Y. :Flow stress and creep rate of nanocrystalline Ni In: Scripta Materialia 57 (2007 ), p. 429-431 ISSN: 1359-6462 DOI: 10.1016/j.scriptamat.2007.04.041
Blum W. , Li Y. , Breutinger F. :Deformation kinetics of coarse-grained and ultrafine-grained commercially pure Ti In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 462 (2007 ), p. 275-278 ISSN: 0921-5093 DOI: 10.1016/j.msea.2006.05.171
Durst K. , Franke O. , Böhner A. , Göken M. :Indentation size effect in Ni-Fe solid solutions In: Acta Materialia 55 (2007 ), p. 6825-6833 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2007.08.044
Dzivenko DA. , Zerr A. , Schweitzer E. , Göken M. , Boehler R. , Riedel R. :Elastic moduli and hardness of c- Zr2.86 (N0.88 O0.12) 4 having Th3 P4 -type structure In: Applied Physics Letters 90 (2007 ), Article No.: 191910 ISSN: 0003-6951 DOI: 10.1063/1.2738373
Franke O. , Durst K. , Göken M. :Microstructure and local mechanical properties of Pt-modified nickel aluminides on nickel-base superalloys after thermo-mechanical fatigue In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 467 (2007 ), p. 15-23 ISSN: 0921-5093 DOI: 10.1016/j.msea.2007.02.069
Franke O. , Durst K. , Maier V. , Göken M. , Birkholz T. , Schneider H. , Hennig F. , Gelse K. :Mechanical properties of hyaline and repair cartilage studied by nanoindentation In: Acta Biomaterialia 3 (2007 ), p. 873-881 ISSN: 1742-7061 DOI: 10.1016/j.actbio.2007.04.005
Gemming S. , Janisch R. , Schreiber M. , Spaldin NA. :Density-functional investigation of the (113) [-110] twin grain boundary in Co-doped anatase Ti O2 and its influence on magnetism in dilute magnetic semiconductors In: Physical Review B - Condensed Matter and Materials Physics 76 (2007 ), Article No.: 045204 ISSN: 1550-235X DOI: 10.1103/PhysRevB.76.045204
Hübner P. , Kiessling R. , Biermann H. , Hinkel T. , Jungnickel W. , Kawalla R. , Höppel HW. , May J. :Static and cyclic crack growth behavior of ultrafine-grained Al produced by different severe plastic deformation methods In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 (2007 ), p. 1926-1933 ISSN: 1073-5623 DOI: 10.1007/s11661-007-9297-0
Kassner ME. , Kumar P. , Blum W. :Harper-Dorn creep In: International Journal of Plasticity 23 (2007 ), p. 980-1000 ISSN: 0749-6419 DOI: 10.1016/j.ijplas.2006.10.006
Li Y. , Müller J. , Höppel HW. , Göken M. , Blum W. :Deformation kinetics of nanocrystalline nickel In: Acta Materialia 55 (2007 ), p. 5708-5717 ISSN: 1359-6454 DOI: 10.1016/j.actamat.2007.06.036
Maier HJ. , Biallas G. , Eggeler G. , Estrin J. , Hellmig RJ. , Göken M. , Höppel HW. , Gottstein G. , Winning M. :Symposium on ultrafine-grained materials: From basics to applications In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 (2007 ), p. 1881 ISSN